critical defects of commercial motor vehicles, O. Reg. 512/97
Section 9
Cite as critical defects of commercial motor vehicles, O. Reg. 512/97, s. 9 · current to November 11, 2026 · consolidated from March 1, 2022 · read from e-Laws on November 16, 2026
The text
A commercial motor vehicle has a critical defect for the purposes of sections 82.1 and 84 of the Act if either of the following defects is present:
1. With the wheels of the steering axle on the ground in the straight ahead position and the engine turned on, the circumference of the steering wheel moves in excess of the measurements contained in Column 2 for the applicable diameter shown in Column 1 of Schedule 2, with no accompanying movement of the left front wheel.
2. With the vehicle having been stopped with the wheels of the steering axle on the ground in the straight ahead position, with hand force alone applied, a steering linkage ball and socket joint relating to the steering axle moves other than rotationally by more than ¼ inch (6.3 mm). O. Reg. 512/97, s. 9; O. Reg. 130/10, s. 7.
Read the critical defects of commercial motor vehicles on e-Laws ↗
Made under Highway Traffic Act, R.S.O. 1990, c. H.8.