CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 280

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 280 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) Shoring and bracing for a shaft that is more than 1.2 metres deep shall be capable of withstanding all loads likely to be applied to them. O. Reg. 213/91, s. 280 (1). (2) The shoring and bracing, (a) shall be designed by an engineer in accordance with good engineering practice; and (b) shall be constructed in accordance with the engineer’s design. O. Reg. 213/91, s. 280 (2); O. Reg. 375/22, s. 4, 5. (3) Design drawings by an engineer for the shoring and bracing shall show the size and specifications of the shoring and bracing including the type and grade of all materials to be used in their construction. O. Reg. 213/91, s. 280 (3); O. Reg. 375/22, s. 5. (4) Revoked: O. Reg. 443/09, s. 8. (5) The constructor shall keep a copy of design drawings for the shoring and bracing at the project while the shoring and bracing are in use. O. Reg. 213/91, s. 280 (5).
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.