CONSTRUCTION PROJECTS, O. Reg. 213/91
Section 279
Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 279 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026
The text
(1) The walls of a shaft shall be supported by shoring and bracing adequate to prevent their collapse. O. Reg. 213/91, s. 279 (1).
(2) Subsection (1) does not apply to the walls of a shaft that is less than 1.2 metres deep or is cut in sound rock. O. Reg. 213/91, s. 279 (2).
(3) If a shaft is to be cut in sound rock, the constructor shall obtain a written opinion from an engineer as to whether the walls of the shaft need to be supported by rock bolts or wire mesh to prevent the spalling of loose rock. O. Reg. 213/91, s. 279 (3); O. Reg. 375/22, s. 5.
(4) The walls of a shaft cut in sound rock shall be supported by rock bolts or wire mesh where necessary in the opinion of the engineer. O. Reg. 213/91, s. 279 (4); O. Reg. 375/22, s. 5.
Read the CONSTRUCTION PROJECTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.