MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854

Section 210

Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 210 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) Subject to subsection (5), protective devices and procedures shall be used to prevent a shaft conveyance or counterweight from coming into contact with an intermediate shaft obstruction. R.R.O. 1990, Reg. 854, s. 210 (1). (2) A device which may become an intermediate shaft obstruction shall be positively locked out of the shaft compartment to prevent inadvertent entry into the compartment. R.R.O. 1990, Reg. 854, s. 210 (2). (3) The location of the intermediate shaft obstruction shall be marked on the depth indicator of a hoist. R.R.O. 1990, Reg. 854, s. 210 (3). (4) The protective procedure for operating the intermediate shaft obstruction shall be prepared in writing and posted for use by the hoist operator. R.R.O. 1990, Reg. 854, s. 210 (4). (5) Doors for covering the shaft at the collar to facilitate the maintenance of a shaft conveyance are not an intermediate shaft obstruction if, (a) they are positively latched out of the shaft compartments when not in use; and (b) dual lights are installed to indicate to the hoist operator whether such doors are in or out of the shaft compartment. R.R.O. 1990, Reg. 854, s. 210 (5). (6) Equipment used to directly discharge material into a skip shall operate in such a way that actuating power is required before any gate will open. O. Reg. 583/91, s. 5.
Read the MINES AND MINING PLANTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.