SPECIFICATIONS AND STANDARDS FOR TRAILER COUPLINGS, R.R.O. 1990, Reg. 618
Section 4
Cite as SPECIFICATIONS AND STANDARDS FOR TRAILER COUPLINGS, R.R.O. 1990, Reg. 618, s. 4 · current to November 11, 2026 · consolidated from October 27, 2009 · read from e-Laws on November 16, 2026
The text
(1) A full trailer shall be equipped with a tow bar that is of sufficient strength to withstand a force through its attachments equivalent to the gross weight of the trailer or trailers being towed, without residual deformation to the tow bar. R.R.O. 1990, Reg. 618, s. 4 (1).
(2) Where a tow bar is used to tow a full trailer it shall be connected to the full trailer with an attachment that,
(a) has a strength equal to or greater than that of the tow bar;
(b) in the case of a hinged tow bar, has the minimum clearance necessary for adequate articulation; and
(c) is attached in the manner for which it was designed. R.R.O. 1990, Reg. 618, s. 4 (2).
(3) Where a truck tractor or trailer is equipped with a trailer hitch, the trailer hitch shall,
(a) be of sufficient strength to withstand a force applied at the point to which the tow bar is connected, equivalent to the gross weight of the trailer or trailers being towed, without residual deformation to the trailer hitch;
(b) provide the minimum clearance necessary for adequate articulation in its connection to the trailer being towed; and
(c) be provided with a locking device to prevent accidental separation of the truck tractor or trailer from the trailer being towed. R.R.O. 1990, Reg. 618, s. 4 (3).
(4) The attachment of a trailer hitch to the towing structure of a truck tractor or trailer shall have a strength that is equal to or greater than that of the trailer hitch. R.R.O. 1990, Reg. 618, s. 4 (4).
(5) A towing structure to which a trailer hitch is attached, shall have a strength equal to or greater than that of the trailer hitch. R.R.O. 1990, Reg. 618, s. 4 (5).
(6) The attachment of a towing structure to a truck tractor or trailer shall,
(a) be reinforced or braced to prevent distortion of the frame of the truck tractor or trailer; and
(b) have a strength equal to or greater than that of the trailer hitch. R.R.O. 1990, Reg. 618, s. 4 (6).
Read the SPECIFICATIONS AND STANDARDS FOR TRAILER COUPLINGS on e-Laws ↗
Made under Highway Traffic Act, R.S.O. 1990, c. H.8.