SPECIFICATIONS AND STANDARDS FOR TRAILER COUPLINGS, R.R.O. 1990, Reg. 618
Section 5
Cite as SPECIFICATIONS AND STANDARDS FOR TRAILER COUPLINGS, R.R.O. 1990, Reg. 618, s. 5 · current to November 11, 2026 · consolidated from October 27, 2009 · read from e-Laws on November 16, 2026
The text
(1) A full trailer shall be coupled to the frame or an extension of the frame of a truck tractor or trailer with a safety connecting device that will prevent the full trailer from breaking loose in the event the tow bar fails or becomes disconnected. R.R.O. 1990, Reg. 618, s. 5 (1).
(2) The safety connecting device referred to in subsection (1) shall,
(a) not be attached to any part of a trailer hitch that would render the safety connecting device ineffective should the trailer hitch or its attachment to the towing structure fail;
(b) have the minimum slack necessary for adequate articulation;
(c) have an ultimate strength not less than the gross weight of the trailer or trailers being towed and where the safety connecting device consists of two chains, two cables or two other links, each chain, cable or other link and its attachments shall have an ultimate strength equal to the gross weight of the trailer or trailers being towed;
(d) be connected in such a manner so as to prevent the tow bar from dropping to the ground, and to keep the swing of the full trailer within safe limits in the event the tow bar fails or becomes disconnected;
(e) be equipped with a hook or hooks or other means of attachment that will not become disconnected accidentally;
(f) where it is used in conjunction with a hinged tow bar and where the safety connecting device consists of two chains, two cables or two other links, be attached to the forward axle or chassis frame of the forward axle of the full trailer at two points as far apart as the configuration of the axle or frame permits and equidistant from the centreline of the full trailer;
(g) where it is used in conjunction with a hinged tow bar and where the safety connecting device consists of a single chain or single cable,
(i) have its ends attached to the forward axle or chassis frame of the forward axle of the full trailer at two points as far apart as the configuration of the axle or frame permits and equidistant from the centreline of the full trailer,
(ii) lead along each side of the tow bar, and
(iii) be formed into a bridle by using a thimble and twin-base clamps and include a single means of attachment;
(h) where it is used in conjunction with a non-hinged tow bar,
(i) consist of two chains, two cables or two other links attached to the tow bar at a single point on the centreline of the tow bar or at two points equidistant from the centreline of the tow bar such that the attachment is behind the eye of the tow bar, or
(ii) consist of a single chain, cable or other link attached to the tow bar on the centreline of the tow bar at any point behind the eye of the tow bar;
(i) where it consists of two chains, two cables or two other links attached at separate points, the separate points shall be equidistant from the centreline of the truck tractor or towing trailer; or
(j) where it consists of two chains, two cables or two other links attached to the same point or where a bridle, single chain, single cable or other single link is used, be attached to a point on the centreline of the truck tractor or towing trailer. R.R.O. 1990, Reg. 618, s. 5 (2).
Read the SPECIFICATIONS AND STANDARDS FOR TRAILER COUPLINGS on e-Laws ↗
Made under Highway Traffic Act, R.S.O. 1990, c. H.8.