SPECIFICATIONS AND STANDARDS FOR TRAILER COUPLINGS, R.R.O. 1990, Reg. 618

Section 3

Cite as SPECIFICATIONS AND STANDARDS FOR TRAILER COUPLINGS, R.R.O. 1990, Reg. 618, s. 3 · current to November 11, 2026 · consolidated from October 27, 2009 · read from e-Laws on November 16, 2026

The text

(1) The lower-half of a fifth wheel assembly on a truck tractor, trailer or trailer converter dolly shall be attached to the frame of the truck tractor, trailer or trailer converter dolly with a mounting that, (a) has, (i) brackets, mounting plates or angles, and (ii) bolts or equivalent devices, which together will withstand a force, applied at the coupling point of the fifth wheel assembly, equivalent to the gross weight of the trailer or trailers being towed without residual deformation to the mounting parts; (b) is installed so that the frame of the truck tractor, trailer or converter dolly does not crack or become deformed; and (c) is installed so as to prevent shifting of the lower-half of the fifth wheel assembly on the frame to which it is attached. R.R.O. 1990, Reg. 618, s. 3 (1). (2) Where the upper-half of a fifth wheel assembly is attached to a semi-trailer it shall be attached to the underside of the semi-trailer so as to prevent, (a) warping or cracking of the upper-half of the fifth wheel assembly or the underside of the semi-trailer; and (b) separation of the upper-half of the fifth wheel assembly from the semi-trailer. R.R.O. 1990, Reg. 618, s. 3 (2). (3) A fifth wheel assembly shall be equipped with a locking device that prevents separation of its upper-half from its lower-half. R.R.O. 1990, Reg. 618, s. 3 (3). (4) Where a fifth wheel assembly includes a manual release system, the fifth wheel assembly shall be equipped with a locking device or devices which applies automatically on the coupling of a semi-trailer to a truck tractor, trailer converter dolly or to another semi-trailer. R.R.O. 1990, Reg. 618, s. 3 (4). (5) The lower-half of a fifth wheel assembly on a truck tractor, trailer or trailer converter dolly shall be so mounted in relation to the axles of the truck tractor, trailer or trailer converter dolly that, (a) the load distribution does not unduly interfere with the steering, braking or maneuverability of the truck tractor, trailer or trailer converter dolly; and (b) the combination operates safely. R.R.O. 1990, Reg. 618, s. 3 (5).
Read the SPECIFICATIONS AND STANDARDS FOR TRAILER COUPLINGS on e-Laws ↗

Made under Highway Traffic Act, R.S.O. 1990, c. H.8.