Certification of Petroleum Mechanics, O. Reg. 216/01

Section 12

PM.3 certificate

Cite as Certification of Petroleum Mechanics, O. Reg. 216/01, s. 12 · current to November 11, 2026 · consolidated from August 1, 2008 · read from e-Laws on November 16, 2026

The text

(1) A person who holds a PM.3 certificate may, without supervision, install, remove, alter, repair, test, service and maintain any type of aboveground installation and the equipment and accessories essential to its operation and, in so doing, may, (a) install aboveground tanks and engage in component assembly, spill containment, electrical hook-up and pressure testing; (b) remove aboveground tanks and engage in draining and disconnecting the tank system and in purging tanks; (c) install aboveground petroleum transfer systems, piping or tubing and equipment related to them, and engage in component assembly, spill containment and vapour recovery; (d) repair and maintain systems for detecting leaks and monitoring tanks; and (e) install, remove, repair and maintain bulk handling equipment, including troubleshooting and testing mechanical, hydraulic, electrical and electronic components. O. Reg. 216/01, s. 12 (1); O. Reg. 251/08, s. 8 (1). (2) Revoked: O. Reg. 251/08, s. 8 (2). (3) The holder of a PM.3 certificate may, without supervision, work on any type of aboveground equipment that falls within the scope of the PM.3 certificate so long as the holder has the required experience and time on that type of equipment and that experience and time are documented in a form acceptable to the director. O. Reg. 216/01, s. 12 (3); O. Reg. 251/08, s. 8 (3). (4) The holder of a PM.3 certificate who fails to meet the conditions for unsupervised work set out in subsection (3) may only service and maintain the equipment under the direct supervision of a PM.3 certificate holder who meets those conditions. O. Reg. 251/08, s. 8 (4).
Read the Certification of Petroleum Mechanics on e-Laws ↗

Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.