Certification of Petroleum Mechanics, O. Reg. 216/01
Section 13
PM.4 certificate
Cite as Certification of Petroleum Mechanics, O. Reg. 216/01, s. 13 · current to November 11, 2026 · consolidated from August 1, 2008 · read from e-Laws on November 16, 2026
The text
(1) A person who holds a PM.4 certificate may, without supervision, install, remove, alter, repair, test, service and maintain any type of small aboveground tank with a capacity of 5,000 litres or less and the equipment and accessories essential to its operation and, in so doing, may,
(a) transport and install such aboveground tanks, including preparation and restoration of the site, component assembly, spill containment, electrical hook-up and pressure testing;
(b) remove such aboveground tanks, including removing them from the site by transport, and engaging in draining and disconnecting the tank system and purging tanks; and
(c) repair and maintain systems for detecting leaks and monitoring tanks. O. Reg. 216/01, s. 13 (1); O. Reg. 251/08, s. 9 (1, 2).
(2) The holder of a PM.4 certificate shall not install,
(a) an aboveground tank having a capacity of 5,000 litres or less, except in a location in which it is to remain on a permanent basis; or
(b) piping or tubing to an aboveground tank having a capacity of 5,000 litres or less, except with respect to a direct vent, a direct fill pipe or a direct tank-mounted pipe. O. Reg. 251/08, s. 9 (3).
(3), (4) Revoked: O. Reg. 251/08, s. 9 (3).
Read the Certification of Petroleum Mechanics on e-Laws ↗
Made under Technical Standards and Safety Act, 2000, S.O. 2000, c. 16.