Municipal Wastewater Regulation, B.C. Reg. 87/2012

Section 92

Initial dilution zone for marine waters and lakes

Cite as Municipal Wastewater Regulation, B.C. Reg. 87/2012, s. 92 · last amended October 27, 2025 · read from BC Laws on November 17, 2026

The text

(1) For the purpose of calculating the initial dilution zone for marine waters or a lake, both of the following, measured from the point of discharge and from mean low water, apply: (a) the height is the distance from the bed to the water surface; (b) the radius is the lesser of (i) 100 m, and (ii) 25% of the width of the body of water. (2) For discharge from an outfall diffuser, the radius referred to in subsection (1) (b) (i) must be measured from the first and last diffuser ports. (3) In embayed marine waters and lakes, the initial dilution zone must not extend closer to shore than mean low water. (4) In open marine waters, the edge of the initial dilution zone must be located outside of the shallow water zone in which surf will form along the shore.
Read the Municipal Wastewater Regulation on BC Laws ↗

Made under Environmental Management Act, SBC 2003, c. 53.