Municipal Wastewater Regulation, B.C. Reg. 87/2012

Section 82

Setback requirements

Cite as Municipal Wastewater Regulation, B.C. Reg. 87/2012, s. 82 · last amended October 27, 2025 · read from BC Laws on November 17, 2026

The text

(1) For all discharges to ground and standby areas, a discharger must ensure that setbacks from the area into which discharging occurs are at least the distance set out in Table 5. (2) A discharger must ensure that subsurface fields, the standby area and a surrounding buffer strip as set out in row 2 ("building drain, buffer strip") of Table 5 (a) are kept free of buildings or hard surfacing of any kind, and (b) are not used for building drains or any activity that may cause damage to the system or interfere with its operation. (3) The wastewater facility itself is a building for the purposes of row 2 of Table 5. (4) For the purposes of row 6 of Table 5, if, based on a hydrogeological assessment to determine the minimum distance required to protect the water quality of a water well, (a) the distance from the water well must be extended in accordance with the hydrogeological assessment, or (b) the maximum daily flow is more than or equal to 37 m3/d, the distance from the water well may be decreased, if authorized by a director, to a distance of no less than 90 m. Table 5 — Minimum Setback Requirements Row Feature Minimum Setback Distance (m) Maximum Daily Flow < 37 m3/d ≥ 37 m3/d 1 property boundary 3 6 2 building drain, buffer strip 5 10 3 body of water 30 30 4 water within the Okanagan Basin 30 150 5 water well 60 90 6 water well within unconfined aquifer 60 300
Read the Municipal Wastewater Regulation on BC Laws ↗

Made under Environmental Management Act, SBC 2003, c. 53.