Municipal Wastewater Regulation, B.C. Reg. 87/2012
Section 81
Drain fields
Cite as Municipal Wastewater Regulation, B.C. Reg. 87/2012, s. 81 · last amended October 27, 2025 · read from BC Laws on November 17, 2026
The text
(1) A discharger must ensure that visual inspection ports are installed in the drain field.
(2) A discharger must ensure that all of the following requirements are met:
(a) drainage pipes are provided in 2 drain fields, each having at least the length of drainage pipe required under section 78 [drainage pipe length requirements] unless a reduction is permitted under section 79 [reductions in drainage pipe length];
(b) a third undeveloped drain field is retained as a standby area;
(c) drain fields are constructed with trenches spaced
(i) such that there is at least 3 m between the centre of each trench, or
(ii) if the performance of the drain field would not be adversely affected, at least 2 m apart from each other with at least double the standby area;
(d) trenches are at least 0.6 m in width, with trench bottoms at least 0.3 m below the pipe invert.
Read the Municipal Wastewater Regulation on BC Laws ↗
Made under Environmental Management Act, SBC 2003, c. 53.