Municipal Wastewater Regulation, B.C. Reg. 87/2012

Section 100

Additional outfall requirements for estuaries, lakes and marine waters

Cite as Municipal Wastewater Regulation, B.C. Reg. 87/2012, s. 100 · last amended October 27, 2025 · read from BC Laws on November 17, 2026

The text

(1) In this section: “D1” means the depth (m) of the shallowest diffuser port below mean low water; “D2” means the distance (m) to the closest port of the diffuser from mean low water. (2) A qualified professional must ensure that outfalls to estuaries, lakes or marine waters with a surface area greater than 100 ha meet the following depth, flow and distance requirements: (a) D1 must be at least 10 m and D2 must be at least 30 m; (b) subject to paragraph (a), for discharges of less than 5 000 m3/d, the calculated critical flow must be greater than or equal to the maximum daily flow (m3/d), with the calculated critical flow being the greater positive value of (i) (D1 + 0.075D2 − 21) / 0.0029, and (ii) (D1 + 0.075D2 − 12.225) / 0.025; (c) subject to paragraph (a), for discharges equal to or more than 5 000 m3/d, D1 and D2 must be determined by an environmental impact study and computer modelling of the discharge. (3) For the purposes of subsection (2) (b), if an outfall has a diffuser, the terminus of the outfall is the closest and shallowest port.
Read the Municipal Wastewater Regulation on BC Laws ↗

Made under Environmental Management Act, SBC 2003, c. 53.