Weld Repair of Aluminum Alloy Wheels Regulation, B.C. Reg. 5/97
Section 11
Allowable weld repairs
Cite as Weld Repair of Aluminum Alloy Wheels Regulation, B.C. Reg. 5/97, s. 11 · last amended February 28, 2022 · read from BC Laws on November 17, 2026
The text
(1) Wheel repairs that use welding in combination with heat and cold straightening are allowed.
(2) Weld repairs must only be carried out using approved procedures set out in GTAW or GMAW.
(3) The approved procedures under subsection (2) are for weld bead overlay, weld buildup and full penetration groove weld for aluminum castings, forgings and 5000 and 6000 series aluminum alloy wheels.
(4) The acceptance criteria for aluminum welds must conform to CSA W59.2-M1991 standard, Weld Aluminum Construction, section 6, Acceptance Criteria for Welded Joints.
(5) The acceptance criteria for internal welds must conform to
(a) CSA W59.2-M1991 standard, Weld Aluminum Construction, Table 8, Acceptance Criteria for Internal Defects, for size limits of internal defects, and
(b) CSA W59.2-M1991 standard, Weld Aluminum Construction, Figure 12, Acceptance Criteria for Dispersed Porosity.
Read the Weld Repair of Aluminum Alloy Wheels Regulation on BC Laws ↗
Made under Motor Vehicle Act, RSBC 1996, c. 318.