Weld Repair of Aluminum Alloy Wheels Regulation, B.C. Reg. 5/97

Section 10

Type and nature of repairable wheel damage

Cite as Weld Repair of Aluminum Alloy Wheels Regulation, B.C. Reg. 5/97, s. 10 · last amended February 28, 2022 · read from BC Laws on November 17, 2026

The text

(1) Weld repair is restricted to the front and rear lip, front and rear rim flange, bead seat and the wheel well areas of an aluminum alloy wheel as shown in Schedule 2. (2) Cosmetic weld repair is allowed on the entire wheel, including weld repair of surface nicks and gouges which do not affect the structural integrity of the wheel. (3) If the weld repair supervisor decides that the damaged wheel cannot be safely repaired, the wheel must be discarded and permanently stamped with the word "UNSAFE", using characters not less than 5 mm in height, on the inside of the wheel rim adjacent to the valve stem hole.
Read the Weld Repair of Aluminum Alloy Wheels Regulation on BC Laws ↗

Made under Motor Vehicle Act, RSBC 1996, c. 318.