Weld Repair of Aluminum Alloy Wheels Regulation, B.C. Reg. 5/97

Section 12

Other permitted repairs

Cite as Weld Repair of Aluminum Alloy Wheels Regulation, B.C. Reg. 5/97, s. 12 · last amended February 28, 2022 · read from BC Laws on November 17, 2026

The text

(1) Cold straightening of wheels is allowed if the depth of deformation on the wheel is less than the flange material thickness and under 10 cm (4 inches) in length in any one location along the wheel bead circumference. (2) Heat straightening of wheels is allowed if (a) the heat is restricted to not more than 204C (400F), (b) the depth of the wheel deformation considered repairable by heat straightening is not more than 10% of the wheel diameter on the front (outside) or rear (inside) bead, and (c) the length of the wheel deformation considered repairable by heat straightening is not more than 10% of the wheel bead circumference on the front (outside) bead or 20% of the wheel bead circumference on the rear (inside) bead.
Read the Weld Repair of Aluminum Alloy Wheels Regulation on BC Laws ↗

Made under Motor Vehicle Act, RSBC 1996, c. 318.