Groundwater Protection Regulation, B.C. Reg. 39/2016
Schedule 2
Schedule 2
Cite as Groundwater Protection Regulation, B.C. Reg. 39/2016, Schedule 2 · last amended December 1, 2022 · read from BC Laws on November 17, 2026
The text
Schedule 2 Information in Well Identification Reports 1 A well identification report required under section 75 [well identification reports by owner of well supplying water supply system] of this regulation must include
(a) the following information relating to the owner and location of the well:
(i) the name, mailing address, telephone number and, if available, the email address of the owner of the well that is for the purpose of supplying a water supply system;
(ii) the name of the well, if any;
(iii) the name of the water supply system;
(iv) the property on which the well is located described by its site address, legal description or parcel identifier number (PID);
(v) either
(A) the universal transverse mercator (UTM) zone and the UTM coordinates of the well recorded to the nearest metre, or
(B) the latitude and longitude of the well recorded in decimal degrees to at least 5 decimal places or recorded in degrees, minutes and seconds with the seconds recorded to at least 2 decimal places,
(b) the following information relating to the well identification plate:
(i) the well identification number;
(ii) a description of where the well identification plate is attached;
(iii) the name of the person attaching the well identification plate;
(iv) the date of attachment of the well identification plate, and
(c) a copy of
(i) any available well construction report relating to the well, or
(ii) any information on the depth and diameter of the well. 2 Section 1 of this Schedule does not limit any other provision of this regulation requiring the inclusion of information in a well identification report.
Read the Groundwater Protection Regulation on BC Laws ↗
Made under Water Sustainability Act, SBC 2014, c. 15.