Groundwater Protection Regulation, B.C. Reg. 39/2016
Section 39
Maintenance and attachment of well caps or steel plates
Cite as Groundwater Protection Regulation, B.C. Reg. 39/2016, s. 39 · last amended December 1, 2022 · read from BC Laws on November 17, 2026
The text
(1) A well owner must ensure that
(a) a well cap that meets the applicable requirements of this Part remains securely attached to the top of the production casing or, if the well is not yet in service, a steel plate remains welded to the top of the production casing, and
(b) the well cap or steel plate is maintained in good operating condition.
(2) Subject to section 42 [custom-designed well caps and well covers], if a well does not already have a well cap securely attached to the top of the production casing, the well owner must promptly and securely attach to the top of the production casing a well cap that meets the requirements of this Part.
(3) A steel plate welded to the production casing may be used instead of a well cap on a well referred to in subsection (2) that is not yet in service.
(4) Subsections (1) and (2) do not apply in relation to
(a) a geotechnical well,
(b) a closed-loop geoexchange well, or
(c) a water supply well equipped with a hand pump that meets the requirements of section 38 (1) for a well cap.
Read the Groundwater Protection Regulation on BC Laws ↗
Made under Water Sustainability Act, SBC 2014, c. 15.