Groundwater Protection Regulation, B.C. Reg. 39/2016

Section 38

Well caps

Cite as Groundwater Protection Regulation, B.C. Reg. 39/2016, s. 38 · last amended December 1, 2022 · read from BC Laws on November 17, 2026

The text

(1) Subject to subsections (3) to (5), the person responsible for drilling or altering a well must, promptly on completing the drilling or alteration, securely attach to the top of the production casing a well cap that does all of the following: (a) prevents direct and unintended entry into the well of (i) any water at the surface of the ground, including floodwater and ponded water, and (ii) any foreign matter; (b) prevents persons or animals from entering the well; (c) prevents or minimizes the flow of water from a flowing artesian well. (2) A well cap required under subsection (1) must be (a) commercially manufactured, or (b) fabricated from durable material having strength suited to the location of the well cap and the local environmental conditions. (3) A steel plate welded to the top of the production casing may be used instead of a well cap on a well that is not yet in service. (4) The person responsible for drilling or altering a well that has an annular space between multiple casings must securely attach to the casings at the top of the annular space a permanent and watertight well cap that complies with subsection (2). (5) Subsection (1) does not apply in relation to (a) a geotechnical well, (b) a closed-loop geoexchange well, or (c) a water supply well equipped with a hand pump that meets the requirements of subsection (1) for a well cap.
Read the Groundwater Protection Regulation on BC Laws ↗

Made under Water Sustainability Act, SBC 2014, c. 15.