Groundwater Protection Regulation, B.C. Reg. 39/2016

Section 40

Well covers

Cite as Groundwater Protection Regulation, B.C. Reg. 39/2016, s. 40 · last amended December 1, 2022 · read from BC Laws on November 17, 2026

The text

(1) Subject to subsection (3), the person responsible for drilling or altering a well in which the top of the casing is below the surface of the ground must, in addition to complying with section 38 [well caps], promptly and securely install at or above the surface of the ground a well cover that does both of the following: (a) prevents direct and unintended entry into the well of (i) any water at the surface of the ground, including floodwater and ponded water, and (ii) any foreign matter; (b) prevents persons or animals from entering the well. (2) A well cover required under subsection (1) must be (a) commercially manufactured, or (b) fabricated from durable material having strength suited to the location of the well cover and the local environmental conditions. (3) Subsection (1) does not apply in relation to a geotechnical well or a closed-loop geoexchange well.
Read the Groundwater Protection Regulation on BC Laws ↗

Made under Water Sustainability Act, SBC 2014, c. 15.