Drilling and Production Regulation, B.C. Reg. 282/2010
Section 7
Spacing and target areas for gas wells
Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 7 · last amended April 1, 2025 · read from BC Laws on November 17, 2026
The text
(1) In each pool, the target area for a gas well in a normal spacing area at any depth is the area inside, but not nearer than 250 m to the sides of, the spacing area.
(2) A permit holder may complete one gas well in each normal spacing area on a location that contains more than one normal spacing area if each well is located not nearer than 250 m to the boundary of the location.
(3) For the purposes of section 65, the off-target penalty factor for a gas well completed outside the gas well target area is: FOTP = 8 x d1d2
A where FOTP = off-target penalty factor; d1 = the distance north or south, whichever is closer, from the closest point of the well bore within the productive zone to the side of the spacing area; d2 = the distance east or west, whichever is closer, from the closest point of the well bore within the productive zone to the side of the spacing area; A = the area of the spacing area.
(4) Subsection (3) does not apply to any of the following:
(a) the discovery well of a gas pool;
(b) a well drilled and completed before May 2, 1958;
(c) an off-target gas well located not nearer than 250 m to the boundary of the location.
(5) Subsections (1) to (3) do not apply to the completed portion of a well producing from an unconventional zone listed in Schedule 2.
(6) A well permit holder may not produce from a well in an unconventional zone listed in Schedule 2 if a completed portion of the wellbore is located closer than the distance listed in Schedule 2 for that zone to land with respect to which the well permit holder
(a) is not the owner of the petroleum and natural gas rights or the holder of the location, or
(b) does not have an agreement with the owner or holder respecting the production.
(7) For the purposes of the definition of "daily gas allowable" in section 1, daily gas allowable is: DGA = UDGA x FOTP where DGA = daily gas allowable; UDGA = unadjusted daily gas allowable; FOTP = off-target penalty factor.
Read the Drilling and Production Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.