Drilling and Production Regulation, B.C. Reg. 282/2010

Section 6

Spacing and target areas for oil wells

Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 6 · last amended April 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) In each pool, the target area for an oil well in a normal spacing area at any depth is the area inside, but not nearer than 100 m to the sides of, the spacing area. (2) If the boundary of a location does not coincide with the side of a normal oil well spacing area, the oil well target area must have sides not nearer than 100 m to the boundary. (3) A permit holder may complete one oil well in each normal spacing area on a location that contains more than one normal spacing area if each well is located not nearer than 100 m to the boundary of the location. (3.1) Subsections (2) and (3) do not apply to the completed portion of a well producing from an unconventional zone listed in Schedule 2. (4) For the purposes of section 54, the off-target penalty factor for an oil well completed outside the oil well target area is: FOTP = 12 x d1d2 A where FOTP = off-target penalty factor; d1 = the distance north or south, whichever is closer, from the closest point of the well bore within the productive zone to the side of the spacing area; d2 = the distance east or west, whichever is closer, from the closest point of the well bore within the productive zone to the side of the spacing area; A = the area of the spacing area. (5) Subsection (4) does not apply to any of the following: (a) the discovery well of an oil pool; (b) a well drilled and completed before May 2, 1958; (b.1) the completed portion of a well producing from an unconventional zone listed in Schedule 2; (c) an off-target oil well located not nearer than 100 m to the boundary of the location. (6) A well permit holder may not produce from a well in an unconventional zone listed in Schedule 2 if a completed portion of the wellbore is located closer than the distance listed in Schedule 2 for that zone to land with respect to which the well permit holder (a) is not the owner of the petroleum and natural gas rights or the holder of the location, or (b) does not have an agreement with the owner or holder respecting the production.
Read the Drilling and Production Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.