Drilling and Production Regulation, B.C. Reg. 282/2010
Section 5
Position of wells
Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 5 · last amended April 1, 2025 · read from BC Laws on November 17, 2026
The text
(1) If a well or facility is
(a) closer than 100 m to the natural boundary of a water body, or
(b) 100 m or more from the natural boundary of a water body, but situated so that, given the topography or other relevant factors, it is likely that an uncontrolled flow of oil, gas, brine or another fluid may reach the water body,
the permit holder must ensure surface-control features are in place, or surface-control measures have been taken, to contain escaping fluids.
(2) A permit holder must not drill a well within
(a) 40 m of the right of way or easement of any road allowance or public utility,
(b) 100 m of a permanent building, installation or works,
(c) 100 m of a place of public concourse, or
(d) 100 m of a reservation for national defence.
Read the Drilling and Production Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.