Drilling and Production Regulation, B.C. Reg. 282/2010
Section 52.061
Methane emissions from pneumatic devices and pneumatic pumps
Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 52.061 · last amended April 1, 2025 · read from BC Laws on November 17, 2026
The text
(1) In this section, “pneumatic devices and pneumatic pumps fleet”, in relation to a permit holder means all of the pneumatic devices and pneumatic pumps used at facilities of the permit holder whether or not under the same permit.
(2) Beginning on January 1, 2030, a permit holder that uses a pneumatic device or pneumatic pump at a facility must ensure that the emissions of methane from the permit holder's pneumatic devices and pneumatic pumps fleet do not exceed the annual methane emissions threshold calculated in accordance with subsection (3).
(3) Subject to subsection (4), the annual methane emissions threshold is calculated in accordance with the following formula, rounded to the nearest whole number: Annual volume of methane emissions (tonnes/year) = 0.4 (a+b+c+d+e+f) where: a = number of oil wells; b = number of gas wells; c = number of disposal wells; d = number of batteries; e = number of satellite batteries; f = number of processing batteries.
(4) The number of wells or batteries referred to in subsection (3) are wells or batteries reported as active in the 2021 calendar year.
(5) The permit holder must maintain records in respect of the information used to make the calculation under subsection (3) until January 1, 2035.
(6) The permit holder must submit to the regulator a report stating the total volume in tonnes of emissions of methane from the pneumatic devices and pneumatic pumps fleet by March 31 of each year.
(7) This section is repealed on December 31, 2034.
Read the Drilling and Production Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.