Drilling and Production Regulation, B.C. Reg. 282/2010

Section 52.06

Pneumatic pumps

Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 52.06 · last amended April 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) A facility permit holder of a facility must not use at the facility a pneumatic pump that emits natural gas unless the pump (a) was installed before January 1, 2021, or (b) is operated 750 hours or less per year. (2) A facility permit holder of a facility that uses a pneumatic pump that emits natural gas must maintain a record that contains (a) a description of the pump and the type of fluid pumped, and (b) the following information for each calendar month: (i) the number of hours the pump is operated; (ii) the volume of natural gas emitted from the pump. (3) This section does not apply in relation to a pneumatic pump that uses propane. (4) A facility permit holder must not use a pneumatic pump that vents natural gas at a facility unless it is permitted under section 52.021. (5) Subsection (4) applies to a facility if the facility permit holder (a) applied for a facility permit on or after January 1, 2025, or (b) made a modification to the facility, other than a well facility, after January 1, 2028. (6) This subsection and subsections (1), (2), (4) and (5) are repealed on December 31, 2034. (7) Beginning on January 1, 2035, a facility permit holder of a facility that includes a pneumatic pump must not vent natural gas unless it is permitted under section 52.021.
Read the Drilling and Production Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.