Drilling and Production Regulation, B.C. Reg. 282/2010

Section 52.07

Pneumatic compressor starters

Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 52.07 · last amended April 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) A facility permit holder of a facility that uses a pneumatic compressor starter must ensure that the emissions of natural gas from the compressor starter are (a) routed to hydrocarbon gas conservation equipment, if the facility includes hydrocarbon gas conservation equipment to which the emissions can be routed, or (b) flared in accordance with sections 42 to 44, if the facility includes a flaring system to which the compressor starter can be connected. (2) A facility permit holder of a facility that uses a pneumatic compressor starter that cannot be routed or flared as set out in subsection (1) must maintain a record that contains (a) a description of the compressor starter, and (b) the following information for each calendar month: (i) the volume of natural gas used in start attempts; (ii) the number of hours the compressor starter is operated; (iii) the volume of natural gas emitted from the compressor.
Read the Drilling and Production Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.