Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004

Section 7

Certificate of qualification

Cite as Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004, s. 7 · last amended December 31, 2024 · read from BC Laws on November 17, 2026

The text

(1) The following classes of certificates of qualification are established: (a) first class power engineer; (b) second class power engineer; (c) third class power engineer; (d) fourth class power engineer; (e) fifth class power engineer; (f) refrigeration operator; (g) category "A" interim power engineer; (h) category "B" interim power engineer; (i) Repealed. [B.C. Reg. 134/2009, s. 14 (c).] (j) oil well boiler operator; (k) antique show boiler operator; (l) ice facility operator; (m) boiler safety awareness; (n) refrigeration safety awareness; (o) class "A" pressure welder; (p) class "IT" pressure welder; (q) class "R" pressure welder. (2) If an applicant for a certificate of qualification is required under this regulation to have employment experience as a condition of certification, the applicant must provide a signed, written statement from the chief engineer of the plant in which the applicant is employed, that (a) sets out in detail the qualifying time, experience, knowledge and qualifications of the applicant, and (b) describes the plant in which the applicant is employed, including the boiler capacity and types of equipment in the plant. (3) For the purposes of subsection (2), if there is no chief engineer, the statement may be provided by the owner of the plant. (4) For the purposes of this section, a provincial safety manager may recognize equivalent training and experience that an applicant has gained from a jurisdiction other than British Columbia, subject to an examination of the applicant, as counting toward the requirements to obtain a corresponding certificate of qualification issued under this regulation.
Read the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.