Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004
Section 55
General supervision status plant registration and operation
Cite as Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004, s. 55 · last amended December 31, 2024 · read from BC Laws on November 17, 2026
The text
(1) A provincial safety manager may register a plant as a general supervision status plant operation if the plant
(a) is not located in an institution or public assembly occupancy premises,
(b) is
(i) a power plant that does not exceed 30 m2 of boiler capacity,
(ii) a steam heating plant that does not exceed 200 m2 of boiler capacity,
(iii) a fluid heating or low pressure thermal fluid plant that does not exceed 500 m2 of boiler capacity,
(iv) a low temperature, low pressure fluid plant that does not exceed 2 000 m2 of boiler capacity,
(v) an unfired plant that does not exceed 1 000 m2 of boiler capacity, or
(vi) a refrigeration plant that does not exceed a total plant capacity of 1 000 kW prime mover nameplate rating,
(c) has every boiler in the plant equipped with a low water fuel cut-off device that
(i) has a manual reset that is in addition to, and independent of, any other low water fuel cut-off device required under the Act or this regulation, and
(ii) is tested weekly or as required by a provincial safety manager and for which the results are recorded by the person in charge of the plant, and
(d) meets all the administrative and technical specifications issued by a provincial safety manager after a successful review.
(2) A general supervision status plant operation requires the presence of a power engineer with the appropriate class of certificate of qualification as determined by a plant safety audit inspection and as required by a provincial safety manager.
(3) A plant operating as a general supervision status plant must, as a minimum, have a power engineer with the appropriate class of certificate of qualification who must inspect the plant in accordance with conditions established by a provincial safety manager.
Read the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.