Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004

Section 5

Individuals who may perform regulated work

Cite as Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004, s. 5 · last amended December 31, 2024 · read from BC Laws on November 17, 2026

The text

(1) An individual must not perform regulated work unless the individual (a) holds a valid certificate of qualification issued under this regulation, (b) performs regulated work in accordance with section 5 of the Safety Standards General Regulation, (c) is specifically authorized in this regulation, or (d) has been exempted from any specified authorization requirement under this regulation. (2) An individual must not perform maintenance and repairs on a refrigeration plant unless the individual (a) holds a fourth class power engineer's certificate of qualification or higher, or (b) is a refrigeration mechanic. (3) An individual must not do pressure welding relating to regulated products under this regulation (a) unless the individual holds a pressure welder's certificate of qualification, and (b) except in accordance with CSA B51. (4) An individual must not do brazing relating to regulated products under this regulation except in accordance with CSA B51.
Read the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.