Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004

Section 21

Fourth class or higher engineer may do limited electrical work

Cite as Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation, B.C. Reg. 104/2004, s. 21 · last amended December 31, 2024 · read from BC Laws on November 17, 2026

The text

The holder of a valid power engineer's certificate of qualification of 4th class or higher issued under the Act may, while employed by a licensed boiler or refrigeration contractor or working under an operating permit and without requiring any additional authorization, do any of the following with respect to electrical equipment that is part of a plant: (a) connect branch circuit wiring to the boiler equipment integral connection box from a junction box or disconnect mounted in close proximity to the boiler equipment; (b) perform work on class 2 circuit wiring up to a rated output of 100 Volt amps; (c) perform work on low voltage controls or 24 volt thermostats; (d) perform work on three phase motors or controllers integral to the boiler equipment.
Read the Power Engineers, Boiler, Pressure Vessel and Refrigeration Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.