Electrical Safety Regulation, B.C. Reg. 100/2004
Section 25
Revision of CDH location management plan
Cite as Electrical Safety Regulation, B.C. Reg. 100/2004, s. 25 · last amended March 4, 2025 · read from BC Laws on November 17, 2026
The text
(1) An owner of a wood processing facility must ensure that a CDH location management plan is revised, by a qualified professional, as follows:
(a) in accordance with the directions of a safety officer or safety manager, within the time required by the safety officer or safety manager;
(b) if electrical equipment within a CDH location is changed in a manner that affects the level of safety to be achieved by complying with the plan;
(c) if changes are made to
(i) combustible dust management practices used in the wood processing facility, or
(ii) processes detailed in a dust management plan used to manage combustible dust hazards;
(d) if changes are made to the type of raw lumber being processed in the wood processing facility;
(e) if significant changes are made to how raw lumber is processed in the wood processing facility, including any changes to the equipment used in processing or the introduction of a new type of processing.
(2) Within 30 days of revising a CDH location management plan for a reason described in subsection (1) (b), (d) or (e), an owner of a wood processing facility must submit to a safety manager a declaration stating
(a) that the plan has been revised by a qualified professional, and
(b) the reason for the revision.
(3) An owner of a wood processing facility must submit to a safety manager any further information the safety manager requires after receiving a declaration under subsection (2).
Read the Electrical Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.