Electrical Safety Regulation, B.C. Reg. 100/2004
Section 26
Continuing duties
Cite as Electrical Safety Regulation, B.C. Reg. 100/2004, s. 26 · last amended March 4, 2025 · read from BC Laws on November 17, 2026
The text
(1) An owner of a wood processing facility must do both of the following with respect to the records referred to in section 24:
(a) keep a copy of the records within the facility;
(b) keep a copy of the records for at least 5 years from the date on which they were made.
(2) For the purpose of subsection (1), the original record and each revision to the record are to be treated as separate records.
(3) An owner of a wood processing facility must ensure the operation of the wood processing facility is in compliance with the CDH location management plan that applies to the facility.
(4) The following persons must promptly notify, in writing, a safety manager or safety officer if a CDH location management plan that applies to a wood processing facility is not being complied with, or if circumstances in the facility have changed in a manner that affects the adequacy of the plan to achieve safety:
(a) the owner of the facility;
(b) the qualified professional who prepared the plan;
(c) a field safety representative named on a permit for electrical equipment located within a CDH location identified in the plan.
(5) Annually, or more often if required by a safety manager, an owner of a wood processing facility must submit to a safety manager, in the form and manner required by the safety manager, a declaration stating
(a) that the owner's wood processing facility is being operated in compliance with the CDH location management plan that applies to the facility, and
(b) all further information, if any, required by the safety manager.
(6) An owner of a wood processing facility must promptly notify a safety manager, in writing and accompanied by proof acceptable to the safety manager, of any of the following circumstances:
(a) if all electrical equipment in CDH locations in the wood processing facility complies with the B.C. Electrical Code;
(b) if electrical equipment in a CDH location that did not comply with the B.C. Electrical Code is permanently removed from the CDH location or replaced with equipment that complies with the B.C. Electrical Code;
(c) if a CDH location identified in a CDH location management plan that applies to the facility no longer exists.
(7) No later than 30 days after the occurrence of either of the following events, an owner of a wood processing facility must notify a safety manager, in writing and accompanied by proof acceptable to the safety manager, of the event:
(a) if ownership of the wood processing facility is transferred to another person;
(b) if the wood processing facility ceases to operate for a period of more than 30 days.
Read the Electrical Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.