Electrical Safety Regulation, B.C. Reg. 100/2004
Section 24
CDH location management plan
Cite as Electrical Safety Regulation, B.C. Reg. 100/2004, s. 24 · last amended March 4, 2025 · read from BC Laws on November 17, 2026
The text
(1) An owner of a wood processing facility must retain a qualified professional to
(a) assess the wood processing facility for the purpose of identifying and classifying, in accordance with an acceptable industry standard, CDH locations within the wood processing facility, and
(b) prepare the records referred to in this section.
(2) Following an assessment, a qualified professional must prepare a written report that does all of the following:
(a) details the results of the assessment and the process used to conduct the assessment, including confirming that the assessment was conducted using an acceptable industry standard;
(b) confirms that the results of the assessment are documented in records located at the wood processing facility;
(c) contains all further information, if any, required by a safety manager.
(3) Following an assessment, a qualified professional must prepare a written CDH location management plan that does all of the following:
(a) either
(i) satisfies a safety manager that electrical equipment in CDH locations in the wood processing facility complies with the B.C. Electrical Code, or
(ii) includes a dust management plan made in accordance with subsection (4);
(b) details a process for the regular evaluation of
(i) the currency of the assessment conducted under subsection (1), and
(ii) the effectiveness of combustible dust management practices used in the wood processing facility and, if applicable, the dust management plan;
(c) contains all further information, if any, required by a safety manager.
(4) A dust management plan must do all of the following:
(a) set out the details of the processes that will be used to manage the combustible dust hazard;
(b) provide procedures for monitoring the implementation of the plan;
(c) provide procedures for recording and keeping the results of the monitoring referred to in paragraph (b), in sufficient detail and in a manner that a safety officer or safety manager, on inspection, will be satisfied that the plan is being implemented as intended.
Read the Electrical Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.