Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162
Section 10
Cite as Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162, s. 10 · current to July 24, 2025 · regulation last amended March 16, 2020
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Subject to subsection (2), every person referred to in section 8 must, before the first use of the tank cover, and every three months after that, conduct a smoke test while the cover is closed to determine whether it leaks.
(2) If a tank cover is being used to control the release of hexavalent chromium compounds from a tank located at a facility at which chromium electroplating, chromium anodizing or reverse etching is carried out on the day on which this section comes into force, the person must conduct the smoke test no later than six months after that day and every three months after that.
(3) The smoke test must be conducted using a smoke test device that generates 15 to 30 m3 of smoke for every 2 m2 of tank surface and using a process that allows the smoke test device to burn completely inside the tank while the tank cover is closed and to fill the space under the cover with smoke.
(4) If the smoke test detects a release of smoke from the tank cover, the person must, before using the tank for chromium electroplating, chromium anodizing or reverse etching, perform the necessary repairs and repeat the test until there are no leaks of smoke from the cover.
(5) The person must record the dates on which the smoke tests were conducted, the results of those tests, the name of the manufacturer of the smoke test device, a description of the steps taken in conducting each test and the sequence in which those steps were performed and, if applicable, the location of any leaks and the measures taken to correct any defects.
Read the Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations on the Justice Laws Website ↗
Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.