THE NEED FOR SPEED: HOW TECHNOLOGICAL ADVANCES ARE DRIVING TRANSPORTATION INNOVATION

Committee on Commerce, Science, and Transportation · Subcommittee on Surface Transportation, Freight, Pipelines, and Safety Senate June 9, 2026

Witnesses (4)

  • Ian Jefferies, President and Chief Executive Officer, Association of American Railroads
  • Chris Spear, President and Chief Executive Officer, American Trucking Associations
  • Laura Chace, President and Chief Executive Officer, ITS America
  • Cole Scandaglia, Deputy Director, International Brotherhood of Teamsters

From the witness list in the published hearing record.

Full text of the official published hearing record. Extracted from the source document — verify against the official record for citation.

- THE NEED FOR SPEED: HOW TECHNOLOGICAL ADVANCES ARE DRIVING TRANSPORTATION INNOVATION

[Senate Hearing 119-548]
[From the U.S. Government Publishing Office]

 S. Hrg. 119-548

 THE NEED FOR SPEED:
 HOW TECHNOLOGICAL ADVANCES ARE DRIVING TRANSPORTATION INNOVATION

=======================================================================

 HEARING

 before the

 SUBCOMMITTEE ON SURFACE TRANSPORTATION, 
 FREIGHT, PIPELINES, AND SAFETY

 of the

 COMMITTEE ON COMMERCE,
 SCIENCE, AND TRANSPORTATION
 UNITED STATES SENATE

 ONE HUNDRED NINETEENTH CONGRESS

 SECOND SESSION 
 __________

 JUNE 9, 2026 
 __________

 Printed for the use of the Committee on Commerce, Science, and 
 Transportation 

 [GRAPHIC(S) NOT AVAILABLE IN TIFF FORMAT] 

 Available online: http://www.govinfo.gov 
 ______
 
 U.S. GOVERNMENT PUBLISHING OFFICE

65-595 PDF WASHINGTON : 2026 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 SENATE COMMITTEE ON COMMERCE, SCIENCE, AND TRANSPORTATION

 ONE HUNDRED NINETEENTH CONGRESS

 SECOND SESSION

 TED CRUZ, Texas, Chairman
JOHN THUNE, South Dakota MARIA CANTWELL, Washington, 
ROGER WICKER, Mississippi Ranking
DEB FISCHER, Nebraska AMY KLOBUCHAR, Minnesota
JERRY MORAN, Kansas BRIAN SCHATZ, Hawaii
DAN SULLIVAN, Alaska EDWARD MARKEY, Massachusetts
MARSHA BLACKBURN, Tennessee GARY PETERS, Michigan
TODD YOUNG, Indiana TAMMY BALDWIN, Wisconsin
TED BUDD, North Carolina TAMMY DUCKWORTH, Illinois
ERIC SCHMITT, Missouri JACKY ROSEN, Nevada
JOHN CURTIS, Utah BEN RAY LUJAN, New Mexico
BERNIE MORENO, Ohio JOHN HICKENLOOPER, Colorado
TIM SHEEHY, Montana JOHN FETTERMAN, Pennsylvania
SHELLEY MOORE CAPITO, West Virginia ANDY KIM, New Jersey
CYNTHIA LUMMIS, Wyoming LISA BLUNT ROCHESTER, Delaware
 Brad Grantz, Republican Staff Director
 Nicole Christus, Republican Deputy Staff Director
 Lila Harper Helms, Staff Director
 Melissa Porter, Deputy Staff Director
 
 ------ 

 SUBCOMMITTEE ON SURFACE TRANSPORTATION, FREIGHT, PIPELINES, 
 AND SAFETY

TODD YOUNG, Indiana, Chairman GARY PETERS, Michigan, Ranking
JOHN THUNE, South Dakota AMY KLOBUCHAR, Minnesota
ROGER WICKER, Mississippi BRIAN SCHATZ, Hawaii
DEB FISCHER, Nebraska EDWARD MARKEY, Massachusetts
DAN SULLIVAN, Alaska TAMMY DUCKWORTH, Illinois
ERIC SCHMITT, Missouri BEN RAY LUJAN, New Mexico
BERNIE MORENO, Ohio ANDY KIM, New Jersey
SHELLEY MOORE CAPITO, West Virginia 

 C O N T E N T S

 ---------- 
 Page
Hearing held on June 9, 2026..................................... 1
Statement of Senator Young....................................... 1
 Letter dated June 8, 2026 to Chairman Todd Young and Ranking 
 Member Gary Peters from Jeff Farrah, Chief Executive 
 Officer, Autonomous Vehicle Industry Association........... 57
 Letter dated June 8, 2026 to Hon. Ted Cruz, Hon. Maria 
 Cantwell, Hon. Todd Young and Hon. Gary Peters from Anne 
 Reinke, President and CEO, Intermodal Association of North 
 America.................................................... 59
Statement of Senator Peters...................................... 3
Statement of Senator Cantwell.................................... 36
 Prepared statement........................................... 36
Statement of Senator Moreno...................................... 40
Statement of Senator Kim......................................... 43
Statement of Senator Lummis...................................... 45
Statement of Senator Lujan....................................... 47
Statement of Senator Cruz........................................ 51

 Witnesses

Ian Jefferies, President and Chief Executive Officer, Association 
 of American Railroads.......................................... 4
 Prepared statement........................................... 5
Chris Spear, President and Chief Executive Officer, American 
 Trucking Associations.......................................... 9
 Prepared statement........................................... 10
Laura Chace, President and Chief Executive Officer, ITS America.. 20
 Prepared statement........................................... 22
Cole Scandaglia, Deputy Director, International Brotherhood of 
 Teamsters...................................................... 29
 Prepared statement........................................... 31

 Appendix

Letter dated June 9, 2026 to Hon. Todd Young and Hon. Gary Peters 
 from L. Ed Dowell, President, American Train Dispatchers 
 Association.................................................... 61
Letter dated June 8, 2026 to Hon. Todd Young and Hon. Gary Peters 
 from Catherine Chase, President, Advocates for Highway and Auto 
 Safety......................................................... 62
 Letter dated June 9, 2026 to Hon. Todd Young and Hon. Gary 
 Peters from John Samuelsen, International President, 
 Transport Workers Union of America (TWU)................... 76
 Letter dated June 9, 2026 to Hon. Ted Cruz and Hon. Maria 
 Cantwell from Matt Hollis, National President, 
 Transportation Communications Union (TCU/IAM).............. 78
 Research article entitled, ``Cost-benefit analysis of side 
 underride guards for new semitrailers in the United 
 States'' by Eric Hein, Institute for Safer Trucking, United 
 States of America.......................................... 80
 Letter dated June 9, 2026 to Chairman Todd Young and 
 Committee Members from Michael S. Baldwin, President, 
 Brotherhood of Railroad Signalment......................... 97
Response to written questions submitted to Ian Jefferies by:
 Hon. Ted Cruz................................................ 115
 Hon. Bernie Moreno........................................... 115
 Hon. Maria Cantwell.......................................... 117
 Hon. John Hickenlooper....................................... 117
Response to written question submitted to Chris Spear by:
 Hon. Ted Cruz................................................ 118
 Hon. Maria Cantwell.......................................... 119
 Hon. John Hickenlooper....................................... 121
Response to written questions submitted to Laura Chace by:
 Hon. Maria Cantwell.......................................... 122
 Hon. Gary Peters............................................. 124
 Hon. Tammy Duckworth......................................... 125
 Hon. John Hickenlooper....................................... 129
Response to written questions submitted to Cole Scandaglia by:
 Hon. Maria Cantwell.......................................... 130
 Hon. Gary Peters............................................. 134
 Hon. John Hickenlooper....................................... 135

 
 THE NEED FOR SPEED:
 HOW TECHNOLOGICAL ADVANCES ARE DRIVING TRANSPORTATION INNOVATION

 ---------- 

 TUESDAY, JUNE 9, 2026

 U.S. Senate,
 Subcommittee on Surface Transportation, Freight, 
 Pipelines, and Safety,
 Committee on Commerce, Science, and Transportation,
 Washington, DC.
 The Subcommittee met, pursuant to notice, at 10:04 a.m., in 
room SR-253, Russell Senate Office Building, Hon. Todd Young, 
Chairman of the Subcommittee, presiding.
 Present: Senators Young [presiding], Cruz, Fischer, Moreno, 
Peters, Cantwell, Lujan, and Kim.
 Also present: Senator Lummis.

 OPENING STATEMENT OF SENATOR TODD YOUNG, 
 U.S. SENATOR FROM INDIANA

 Senator Young. Good morning everyone, and welcome to 
today's subcommittee hearing to examine how technology is used 
and could be used across different transportation ecosystems 
and how to ensure industry has the flexibility to deploy such 
technologies voluntarily and in adherence with common sense 
principles.
 Over the past decade, we've seen a rise in innovative 
technologies that require us to reimagine how our 
transportation networks operate. Technology like autonomous 
vehicles, or AVs, as we call them, a solution to mobility and 
safety challenges our roadways have faced for decades. AVs will 
provide mobility for seniors and those with disabilities while 
increasing the safety of our roads by drastically reducing the 
number of crashes that are often caused by human error.
 In our trucking ecosystem in addition to safety, AVs can 
better secure supply chains while taking strain away from 
workers who often drive countless hours to meet deadlines. 
We've also seen the development of train inspection portals, 
which can analyze images of trains as they move throughout the 
country to better understand defects or other maintenance needs 
that a person may not be able to detect as easily or quickly.
 By taking the strain away from maintenance workers scouring 
over every rail car and maintenance bay, cars can get back on 
the track and continue delivering essential goods. There's also 
Vehicle-to-everything or V2X technologies that can provide 
drivers with critical information as they travel, like where 
construction crews are stationed on highways or where dangerous 
conditions exist, potentially preventing tragic accidents.
 I won't go into every technology that exists, of course, I 
don't want to steal the thunder of our esteemed panelists, but 
these are only a few of the vast suite of technologies 
contributing to safer and more efficient roads and tracks that 
may be discussed today, many of which were only a pipe dream A 
short time ago. They were, of course, referenced years ago in 
the Jetsons or Star Trek. But now many of those things are upon 
us.
 The technology ecosystem, especially within transportation, 
is fast and expanding, and it requires flexibility. The Federal 
Government has done well in the past establishing pilot 
projects or exemptions to test the effectiveness of certain 
technologies. However, we're often slow at the Federal level 
when it comes to expanding proven technologies past the pilot 
program stage.
 So to fully realize the benefits of these innovations, 
we'll need to provide certainty to the private sector and 
develop pathways to commercialization, especially for proven 
technologies. Where we've seen success, we've also seen 
stagnation. Enacted legislation and promulgated rules have 
mandated technology too nascent in its life cycle or set rules 
with limited to no flexibility. For instance, over half a 
decade ago, regulations were effectuated that would require 
truck drivers to deploy warning triangles whenever they stopped 
their truck on the side of the road. And for a time, this rule 
made sense to ensure the safety of other road users and the 
drivers themselves. As technology advanced, however, 
alternative solutions were developed with the very same, if not 
greater, effectiveness.
 If there are avenues that could allow for industry to 
provide the same or greater level of efficacy while increasing 
safety, then I believe Congress should remove the red tape 
prohibiting this sort of innovation. I'm glad to hear of the 
recent waiver issued by the Department of Transportation to 
allow for cab mounted warning beacons in certain instances, 
eliminating the need for a driver to get out of the vehicle, 
especially in unsafe situations like low visibility.
 But this is just one rule that's limiting the ingenuity of 
our private sector. Our adversaries won't wait for us to tie 
our shoes. If the technologies that will transform our 
transportation ecosystem are locked behind outdated rules or 
tied up in red tape, other countries will develop these 
solutions first and the job revolution and manufacturing 
capacity will occur overseas rather than here in Michigan or 
Indiana.
 Indiana is the most manufacturing intensive state in the 
country and known as the Crossroads of America. My state is 
ready to deliver solutions to meet the manufacturing capacity 
needs. I'm sure many of my colleagues want the same 
opportunities for their state as well. So as Congress continues 
to contemplate legislation, it's imperative that we protect the 
innovative opportunities that will bolster our supply chains, 
increase safety, and deliver other workable transportation 
solutions to meet the needs of our economy.
 We have an experienced panel covering several different 
modes of the transportation economy today. I'm looking forward 
to your testimony to better learn how we can work to advance 
technological innovation in our transportation ecosystem, to 
secure American leadership in the industry, and to ensure our 
private sector has the flexibility it needs to develop and 
deploy these transformative technologies.
 Thank you again for being here today, all of you. And I now 
recognize Ranking Member Peters for his opening remarks.

 STATEMENT OF SENATOR GARY PETERS, 
 U.S. SENATOR FROM MICHIGAN

 Senator Peters. Well, thank you, Chairman Young, and thank 
you to our esteemed witnesses for being here today.
 Today we're going to be hearing from witnesses across 
sectors about how technology is transforming our transportation 
system, from our vehicles to our roads to our railroads. And I 
have long advocated for harnessing technological innovation to 
combat the challenges we face in the transportation sector, 
from unsafe roads, harmful environmental impacts, to freight 
and infrastructure challenges that raise prices for everyday 
Americans.
 A prime example is autonomous vehicles. For years I have 
said that Congress cannot continue to stand on the sidelines 
when it comes to these AVs. I believe we must pass a Federal AV 
framework to harness the safety benefits of this technology, 
ensure that it is deployed responsibly, and cement U.S. 
leadership in the development, manufacturing, and deployment on 
our roads.
 But autonomous vehicles are only one piece of the 
technological puzzle. When I first came to the Senate, I helped 
push for positive train control technology that is now deployed 
across the rail system to prevent collisions and high-speed 
train derailments. Last Congress, after the East Palestine 
derailment, we saw firsthand the importance of wayside 
detection technology and this committee authored the Railway 
Safety Act in response.
 On our roadways, both cities and states have leveraged 
Federal funds to deploy AI and connected vehicle technology to 
prevent accidents before they happen and to get first 
responders to the scene a whole lot faster. We've also seen 
passenger and commercial vehicle deploy advanced driver 
assistance systems to help keep both drivers and the public 
safe.
 But there's so much more to do. As we talk today about the 
opportunities and challenges posed by transportation technology 
and the role Congress should play in driving that innovation, I 
want to hear--I want to hear from our witnesses in four basic 
questions. First, how can we harness technology for economic 
growth? Technology should not just increase efficiency, it 
should also increase the affordability for Americans.
 Second, how can this technology support and not replace our 
workforce? Technology has the potential to improve safety and 
productivity for American workers, including America's truck 
drivers, if we play our cards right. But technology should also 
create good paying American jobs which I believe we must 
develop and manufacture here at home--here in the United 
States.
 And third, how do we ensure emerging transportation 
technology doesn't compromise Americans privacy or U.S. 
national security? So for example, today's vehicle technologies 
have advanced sensor suites that collect and analyze a huge 
amount of data which would be extremely dangerous in the wrong 
hands. That's why I pushed to keep Chinese vehicles and vehicle 
technologies out of the United States, and I want to hear from 
our witnesses today about protecting data exploitation by our 
adversaries as well as here at home.
 And fourth, and most importantly, how can transportation 
technology be harnessed to save lives? Every year, 40,000 
Americans die on our highways and nearly 1,000 die on our 
railroads. And these aren't just numbers, they're families that 
will never be whole again. We must take action and we know that 
technology is certainly part of that solution. I believe it 
will require government, industry, labor and advocates coming 
together to address safety crises and to ensure that technology 
is deployed on our transportation system in a way that benefits 
all Americans.
 I look forward to contributing to this effort through our 
discussion here today. Mr. Chairman, I yield back.
 Senator Young. Well, thank you, Senator Peters. I'd now 
like to introduce our witnesses for today for this hearing. The 
Need for Speed, again the catchy title we have.
 Our first witness is Mr. Ian Jeffries. Mr. Jeffries is the 
President and Chief Executive Officer of the Association of 
American Railroads. He has led AAR since January 2019. He has 
over a decade of experience in transportation policy, including 
roles at Federal agencies and the Senate Commerce Committee. 
Mr. Jeffries.

 STATEMENT OF IAN JEFFERIES, 
 PRESIDENT AND CHIEF EXECUTIVE OFFICER, 
 ASSOCIATION OF AMERICAN RAILROADS

 Mr. Jeffries. Good morning, Chairman Young, Ranking Member 
Peters, other members of the Subcommittee. Thank you for the 
opportunity to testify today.
 Today's hearing comes at an important moment for American 
transportation. Next year, believe it or not, freight railroads 
will mark their 200th anniversary. An industry grounded in 
history but being rapidly transformed by innovation. The modern 
rail network increasingly relies on AI assisted inspections, 
machine vision, predictive analytics, advanced sensors, and 
real time data. These tools help identify risks earlier and 
improve safety across the 140,000 mile network and enhance 
service reliability.
 And the results are clear. According to the Federal 
Railroad Administration, 2025 was the safest year on record 
across key measures including derailment rate, equipment and 
track caused accidents, and importantly, employee injuries. 
This progress reflects sustained investment, employee 
expertise, and continuous innovation.
 And that leads to my first point. Technology is driving 
record safety gains and will be essential to the next leap 
forward. The future of rail safety depends on detecting issues 
before they become failures and we are seeing this across the 
industry. For example, at BNSF, systems collect real time track 
data during regular service, while AI enabled tools identify 
defects earlier than traditional methods. And together with 
continuous rail temperature monitoring, they enable a fully 
data driven inspection model. CSX uses advanced detection 
technology that combines GPS, cameras, radar, and LIDAR to 
monitor work zones to automatically stop equipment movement 
when risks are identified.
 Norfolk Southern deploys AI powered imaging portals that 
scan rail cars at track speed and flag defects in near real 
time. Technology now identifies 75 percent of mechanical 
defects on that railroad. Union Pacific uses machine vision and 
AI to analyze large data sets, detect patterns, and predict 
maintenance needs months in advance, allowing more targeted 
preventive action. Other railroads are advancing similar 
innovations.
 CN uses automated inspection systems and ground penetrating 
radar, while CPKC applies optical technology to detect early 
stage defects. Across the industry, technology is expanding 
both the reach and precision of inspections and these tools 
support not replace railroad employees, giving them better 
information to improve safety and operations.
 Which leads to my second point. When policymakers consider 
technology, I ask that they take a mode neutral approach to 
transportation technology. Advanced tools are reshaping freight 
movement across not only rail, but trucking, maritime, and 
logistics writ large. And rail should not be treated 
differently simply because it's an established industry or 
because innovative changes challenge legacy assumptions. 
Federal policies should encourage innovation based on 
measurable outcomes, not restrict through outdated frameworks 
or preferences.
 Third, rail needs a regulatory system to keep pace with 
innovation. Much of today's regulatory structure was developed 
5 decades ago and does not reflect modern technologies or 
operating practices. Railroads now have more advanced ways to 
meet safety goals, yet regulations often prevent those methods 
from being used to satisfy requirements.
 At the same time, we're seeing legislative proposals that 
could lock in legacy practices or double down on legacy 
practices, risking slowing down progress at a time when 
innovation is thriving. If we want continued safety 
improvements, affordability, and supply chain resilience, 
policy must enable investment and support development and 
deployment of new technologies, not discourage them. Let data 
guide decisions and safety outcomes, not rigid inputs.
 Freight rail operates one of the world's most 
interconnected systems and invests roughly $23 billion annually 
in infrastructure, equipment, and technology. And the question 
is whether policy will support that progress. And this is not 
just about transportation, it's about American competitiveness. 
Rail moves about 40 percent of long-haul freight and supports 
critical industries across the economy. These technologies 
being deployed today will determine how effectively we continue 
to do so in the future.
 And so if we want a rail system that is safer, stronger and 
ready for the next century, we must allow innovation to lead 
the way. The choices made here will determine whether progress 
accelerates or stalls. And let's make sure it accelerates. 
Thank you. And I look forward to your questions.
 [The prepared statement of Mr. Jeffries follows:]

 Prepared Statement of Ian Jefferies, President and Chief Executive 
 Officer, Association of American Railroads
 On behalf of the members of the Association of American Railroads 
(AAR), thank you for the opportunity to testify before the Committee. 
AAR freight railroad members account for the vast majority of railroad 
mileage, employees, and freight traffic in Canada, Mexico, and the 
United States. In addition, AAR maintains two wholly-owned subsidiaries 
on the cutting edge of rail technology. MxV Rail in Pueblo, Colorado, 
is the industry's research, testing, and training epicenter, developing 
science-based solutions to make North America's rail network safer, 
more efficient, and more reliable. Railinc in Cary, North Carolina, is 
the industry's digital backbone, providing essential data, tracking, 
maintenance, and messaging services to power safe and efficient rail 
service around the country.
 Safety is at the forefront of everything the railroads do, and I am 
proud to report that 2025 was the safest year on record for railroads. 
The industry set four all-time records: the lowest derailment rate, 
equipment-caused accident rate, track-caused accident rate, and 
employee injury rate. That record-breaking year was made possible 
thanks to billions of dollars in reinvestment by the railroads into 
cutting-edge technology that has transformed the systems that support, 
operate, and optimize freight railroads. As a result, railroads are 
safer, more reliable, and more cost-effective than ever before, and the 
industry is continuing to develop and deploy new technology to maintain 
that trajectory. Railroads have identified a path to take us into the 
future that combines the power of innovative technology with the grit 
and expertise of our workers. That path will only come to fruition in a 
regulatory environment that supports innovation.
Technological Innovation is Changing the Game for Railroads
 When many Americans think of railroads, they might not think of 
cutting-edge technologies, but the Class I railroads are working to 
change that image. Each of the railroads is at the forefront of 
researching, developing, and deploying game-changing technology to 
bring inspections, track health, and employee safety into the future.
CPKC: Broken Rail Detector
 CPKC identified a problem with detecting broken rails in non-
signaled, or dark, territories where a broken rail could go unnoticed 
and cause accidents. To address this concern, the railroad developed 
the Broken Rail Detector (BRD), an in-house proprietary technology to 
identify broken rails and halt train movements on a compromised section 
of track. These solar-powered detectors create an electrical circuit 
all along the rails on a certain section of track. When all the rails 
are functioning properly, the circuit will be continuous. If a rail 
breaks, that circuit will be broken and all traffic will stop. The BRD 
sends an alert to CPKC, and a team is dispatched to inspect and fix the 
broken rail right away. The BRD provides a constant stream of 
information, with new data coming in every 10 minutes ensuring that 
rails are continuously monitored rather than waiting between visual 
inspections to identify problems. These near continuous updates also 
allow CPKC to update its algorithms, identify out of service detectors 
quickly, and create work orders for CPKC track inspection teams. 
Combined with machine learning models and intensive data analysis, the 
company is working to continuously improve the health of its tracks, 
prevent accidents, and keep its track work teams focused on repairs 
around the network.
BNSF: Track Safety Technology Systems
 BNSF's track safety work has focused on an array of different tools 
that allow for more frequent, technology-enabled inspections and 
identify problems sooner than traditional periodic manual inspections. 
BNSF is now inspecting track weekly or more frequently, at track speed 
in revenue service, safely integrating improved inspections without 
operational interruptions. BNSF uses two in-house designed and built 
systems to improve inspections. First, the Onboard Defect 
Identification and Notification (ODIN) is a locomotive-mounted track 
geometry system that measures track conditions as the locomotive is 
pulling freight. Every foot, ODIN uses lasers to measure the gauge, 
cross-level, alignment, and track surface. That information is 
transmitted to BNSF and analyzed in real-time so any defect can be 
addressed as quickly as possible. By the end of 2026, the entire BNSF 
network will be inspected by ODIN systems. Second, the Track Health 
Optical Recognition (THOR) system compliments ODIN's track geometry 
measurements with a machine learning optical inspection system that 
finds safety defects such as broken rails or bars in real time. THOR's 
high-speed optical cameras capture thousands of detailed images of 
rails at various angles while mounted on BNSF's track geometry cars. 
These images are analyzed on board using AI and reports are sent to 
BNSF within minutes, allowing maintenance personnel to be dispatched 
and fix defects early. In 2025 THOR found 1900 defects on 160,000 miles 
of inspected track, most long-before they would have been found by a 
manual inspection. Finally, BNSF is using rail neutral temperature 
measurement projects across the network to measure actual neutral 
temperature and identify and mitigate buckle risk before buckles occur, 
building our understanding of heat-related risks to the entire network. 
Collectively, these efforts reflect continued progress toward a data-
informed, risk-focused approach to track safety.
Norfolk Southern: Train Inspection Portals
 Working with the Georgia Tech Research Institute, NS sought to 
harness the power of AI and optical cameras to take train inspections 
beyond what a manual inspection can see with the naked eye. To that 
end, Georgia Tech developed and NS deployed cutting-edge train 
inspection portals equipped with state-of-the-art, ultra high-
resolution cameras and stadium lighting to capture nearly 1,000 high-
resolution, 360-degree images of each rail car as it passes through the 
portal at track speed. These images are analyzed using AI algorithms 
developed by NS to identify defects that would be otherwise invisible 
to the naked eye during a stationary, manual inspection. NS's 24-hour 
Network Operations Center receives near-real-time alerts for these 
defects, where experts review and flag the defects to be addressed as 
quickly as possible. NS now deploys 11 of these portals around their 
network, and combined with its other wayside detection systems, NS 
estimates that technology now finds 75 percent of the mechanical 
defects on the railroads.
Union Pacific: Machine Vision
 Union Pacific (UP) is also improving its inspections and operations 
across the network, combining AI with innovative new technology to 
expand the reach of inspections and speed up the supply chain. UP's 
Machine Vision technology mounts high-resolution cameras, lasers, and 
other sensors on hi-rail trucks to quickly scan track infrastructure. 
Using Machine Vision, UP inspected 644,000 miles of track in 2025, or 
the equivalent of inspecting the entire network 20 times, and generated 
more than 100 billion measurements of real-world track conditions. That 
data is then analyzed by AI software to detect subtle patterns where 
conditions are changing or defects may occur, allowing the railroad to 
predict where maintenance may be necessary before a defect or an 
incident happens. Track inspectors can then prioritize repairs using 
precise GPS coordinates to identify problem areas and monitor trends in 
track performance over time. This technology allows UP to predict 
months in advance when specific sections of track may require 
maintenance or additional attention, ensuring UP can better plan its 
work and improve safety outcomes.
CSX: Mobile Collision Safety System
 CSX noticed an uptick in machine-to-machine collisions and 
recognized the inherent risks for rail employees in the work 
environment. To address these concerns, CSX developed new technology 
that takes inspiration from advanced automotive safety systems to keep 
workers safer around heavy machinery. The Mobile Collision Safety 
System combines GPS, cameras, radar, and lidar to monitor the areas 
around the equipment, where employees are at the most risk of getting 
injured and machine-to-machine collisions are most likely to happen. 
The system monitors this so-called ``red-zone'' around the equipment 
and, if an object, person, or other collision risk is detected, stops 
the equipment and prevents an accident. While workers are already 
trained to anticipate and prevent collisions, this new technology adds 
an extra layer of protection to prevent accidents. The Mobile Collision 
Safety System is just one of the many innovative ideas developed in-
house by CSX's InnovationX program, which encourages employees to 
submit ideas for new technology, processes, and other innovations to 
make the railroad safer and more efficient.
Canadian National: Critical Risk Management System
 Railroads work every day to ensure employees follow the highest 
safety standards and return home safely. To support this commitment, 
Canadian National (CN) has developed a new mobile safety observation 
app focused on Life Critical Rules--the essential safety practices that 
prevent serious injury or death. Leveraging AI and machine learning, 
the app will identify the work that should be observed, which rule to 
focus on, and when and where the observation should take place to 
maximize impact. These insights are driven by trends in historical 
data, including injuries, accidents, prior observations, weather 
conditions, and other key metrics. By integrating these factors, 
employees can be confident they are conducting the most meaningful 
observations to reduce risk and strengthen workplace safety. When 
combined with CN's Enablon app--which enables real-time reporting and 
tracking of near misses and hazards--employees are empowered with the 
tools and data needed to proactively improve safety across the 
railroad.
Regulatory Environments Can Foster Innovation and Improve Safety
 The billions of dollars in technology investment described above 
are already having an impact on safety and efficiency across the 
network. To take the next great leap forward in safety, regulators and 
policymakers must move beyond the prescriptive regulatory framework 
that stifles innovation and gets sidetracked by political issues. 
Railroads seek a regulatory framework that supports the effective 
systems in place today and embraces investments for the future.
Performance-Based Regulations
 Rather than setting rigid, outdated mandates, a modern regulatory 
framework that emphasizes performance-based, data-driven results will 
help freight railroads improve safety and meet the growing demand for 
freight service while maintaining sufficient government oversight. 
Regulators should set strong safety and operational standards for 
railroads and give railroads the ability to identify the best 
processes, operating systems, and technologies to meet those goals.
 To move into the future and develop a modern, effective regulatory 
framework, policymakers should focus on implementing performance-based 
regulations that allow the industry to invest in cost-effective, 
innovative solutions to enhance safety and efficiency. These 
regulations should be based on verifiable data, sound science, and 
demonstrated need and should encourage innovation without locking in 
existing technologies and processes. Regulators should also strive to 
improve transparency throughout the regulatory process, including 
meaningful discussions with all stakeholders, robust benefit cost 
analysis that considers the cumulative burden of regulations, and 
guidance documents that clarify ambiguous regulations rather than 
creating new obligations or coercing compliance. Finally, these 
regulatory updates must be implemented in an equitable manner across 
all modes of transportation. Currently, other modes of surface 
transportation have embraced performance-based regulations, but 
railroad regulations continue to be bogged down in the status quo of 
the 1980s and 1990s. This divergence in how the different modes are 
regulated only exacerbates underlying modal inequities, putting 
railroads at a distinct competitive disadvantage. Finally, regulators 
should ensure that any Federal money invested in developing and 
expanding new technology, like telematics, creates incentives for 
information sharing between all stakeholders, including the railroads 
themselves.
FRA Waiver Reform
 Policymakers should consider long-overdue reforms to the Federal 
Railroad Administration (FRA) waiver process, which is intended to give 
railroads the opportunity to utilize new technology to improve safety 
outcomes when compared with current regulatory requirements. FRA is 
supposed to use the waiver process to encourage railroads to develop 
new technology that improves safety outcomes. However, in recent years, 
this process has turned into a bottleneck; prior administrations have 
sidetracked technological innovation by focusing on achieving unrelated 
political goals instead of improving rail safety. Refocusing that 
process on safety, rather than satisfying the demands of one 
stakeholder group over another, is one way to build a more technology-
focused regulatory environment. Specifically, FRA should act on waivers 
in a timely manner consistent with statute; make decisions only based 
on transparent criteria and clear science-based data demonstrating 
improved safety outcomes; consistently renew or expand waivers as 
additional data becomes available; and create clear expectations and 
pathways for adoption of new technology and processes by the broader 
industry when the safety record is established. In addition, when a 
waiver is eventually successful, FRA should update the prescriptive 
regulation to a modern, performance-based regulation that follows the 
data, embraces technology, and allows for future development and 
deployment. Finally, lawmakers should not adopt new legislation that 
effectively eliminates or undercuts the waiver process. Bills that bar 
any regulatory waivers or modernizations will actually make the 
railroads less safe by limiting the use of safety technology in the 
future.
Conclusion
 By investing billions in infrastructure and innovation, railroads 
are constantly modernizing operations to improve safety while meeting 
rigorous global supply chain demands. Railroads look forward to working 
with members of this Committee and other policymakers to create a 
regulatory framework that supports innovation, harnesses the expertise 
and ingenuity of the industry, and keeps our workers, customers, and 
communities safe while serving as the engine of America's economy.

 Senator Young. Thank you, Mr. Jeffries.
 Our second witness is Mr. Chris Spear, President and CEO of 
American Trucking Association. He has extensive experience in 
transportation and public policy, having held senior positions 
at Hyundai Motor Company, Honeywell International, and served 
as the Assistant Secretary of Labor for Policy at the U.S. 
Department of Labor. Mr. Spear, you're recognized for five 
minutes.

 STATEMENT OF CHRIS SPEAR, PRESIDENT AND CHIEF EXECUTIVE 
 OFFICER, AMERICAN TRUCKING ASSOCIATIONS

 Mr. Spear. Let me thank you for letting Ian go first. I 
really appreciate that. Chairman Young, Ranking Member Peters, 
members of the Subcommittee, thank you for the opportunity to 
testify today about how Congress can keep America's trucking 
industry safe, competitive, and innovative.
 Trucking moves the vast majority of our Nation's freight, 
connects manufacturers to markets, keeps store shelves stocked, 
and delivers essential goods to communities in every state. Our 
industry is already investing billions in technology to create 
a safer, more modern freight network. Innovation-driven 
solutions not only improve outcomes, but also help lower prices 
paid by consumers and businesses alike. We need Congress's 
support to continue building a stronger supply chain.
 First, Congress should repeal the 12 percent Federal excise 
tax on heavy duty trucks, trailers, and tractors. The century 
old tax punishes the purchase of the very vehicles that come 
with the latest technologies. Adding tens of thousands of 
dollars to the cost of new equipment discourages fleet 
turnover, keeps older equipment on the road longer. Congress 
has a ready solution in Chairman Young's Modern, Clean, and 
Safe Trucks Act, which would remove this outdated barrier and 
accelerate deployment of safer, cleaner, and more efficient 
equipment nationwide.
 Second, Congress should solidify the National Highway 
Traffic Safety Administration's role as the primary authority 
over motor vehicle safety standards. Trucking is a national 
industry and vehicle standards must remain national as well. 
When states or courts impose equipment standards beyond Federal 
law, it creates a fragmented regulatory landscape that drives 
uncertainty for manufacturers, motor carriers, and the supply 
chain. Congress should reaffirm that when NHTSA acts, Federal 
standards take precedence. That clarity is essential if 
companies are going to invest confidently in new technologies 
and deploy them at scale.
 Third, Congress should establish and implement a Federal 
framework for autonomous commercial vehicles. These systems 
hold real promise to enhance safety, improve productivity, and 
strengthen America's economic competitiveness, but only if 
deployment is governed by a clear national strategy. The Build 
America 250 Act would provide this guidance preventing a 
patchwork of State rules from stifling innovation.
 Fourth, Congress should support technology upgrades and 
operational improvements at Federal agencies to combat the rise 
of cargo theft and supply chain fraud. Criminal networks are 
exploiting outdated systems, weak identity controls, and 
fragmented reporting structures to steal freight, impersonate 
legitimate carriers, and undermine trust in the supply chain.
 Congress can help close those gaps by supporting agency 
modernization, stronger registration integrity, better data 
sharing, and advanced fraud detection tools. Chairman Young's 
SAFER Transport Act would provide important tools to help DOT 
detect and deter fraud, while the Combating Organized Retail 
Crime Act would enhance and coordinate the response to 
organized supply chain crime.
 Fifth, Congress should continue promoting proven 
technologies while refraining from mandating technologies that 
have not yet matured or demonstrated effectiveness in real 
world trucking operations. Congress and regulators should 
distinguish between rules that are ready for broad deployment 
and those that are still requiring development, testing, and 
refinement.
 Sixth, Congress should support a resilient national 
approach to positioning, navigation, and timing without 
disrupting the existing technologies and services that keep 
freight moving. Policymakers should reject proposals such as 
NextNav's petition that would repurpose the Lower 900 MHz band 
in ways that risk harmful interference to the millions of 
incumbent devices and systems already operating there, 
including technologies that support logistics, transportation, 
and critical infrastructure.
 Together, these six steps would send a clear signal: 
Congress is ready to embrace technologies today and tomorrow 
and help the trucking industry deliver even greater safety, 
resilience, and economic strength for the American people. I 
look forward to discussing these issues with the Subcommittee 
and answering your questions.
 [The prepared statement of Mr. Spear follows:]

 Prepared Statement of Chris Spear, President and CEO, 
 American Trucking Associations
Introduction
 Chairman Young, Ranking Member Peters, and members of the 
Subcommittee, I am grateful for the opportunity to testify today on the 
key issues facing the trucking industry. I am the President & CEO of 
the American Trucking Associations (ATA), a 93-year-old federation and 
the largest national trade organization representing the 8.4 million 
men and women working in the trucking industry, including more than 3.6 
million professional truck drivers.
 As a 50-state federation that encompasses 37,000 motor carriers and 
suppliers, ATA proudly represents every sector of the industry. From 
less-than-truckload to truckload carriers, from agriculture and 
livestock transporters to auto haulers and household goods movers, and 
from large fleets to mom-and-pop one-truck operators, ATA serves as the 
single unified voice of the trucking industry.
 Trucking is the backbone of our economy, with more than 80 percent 
of U.S. communities relying exclusively on trucking to meet their 
freight needs. According to Federal data, heavy and tractor-trailer 
truck driver is a top-ten occupation in 18 states.\1\ These truck 
drivers are the unsung heroes of our supply chain who keep our economy 
moving. In 2023, they drove almost 330 billion miles--the equivalent of 
13 million trips around the globe--to deliver roughly 11.4 billion tons 
of freight,\2\ 73 percent of the Nation's annual tonnage.\3\ Over the 
next decade, those drivers will be tasked with hauling an additional 
2.7 billion tons of freight above current volumes.\4\
---------------------------------------------------------------------------
 \1\ Occupational Employment and Wage Statistics. U.S. Department of 
Labor, Bureau of Labor Statistics. May 2024. https://www.bls.gov/oes/
current/oessrcst.htm
 \2\ American Trucking Trends 2025. American Trucking Associations, 
2025.
 \3\ Freight Transportation Forecast 2024 to 2035. American Trucking 
Associations, 2024.
 \4\ Ibid.
---------------------------------------------------------------------------
 Five years ago, ATA was one of the first industry trade 
associations to endorse the bipartisan Senate bill that became the 
Infrastructure Investment and Jobs Act (IIJA). The IIJA represented a 
historic increase in funding for roads and bridges--our industry's 
workplace--and highway safety programs. In anticipation of IIJA's 
expiration on September 30, 2026, we hope and trust that Congressional 
willingness to invest in vital surface transportation programs and 
priorities remains strong and will be demonstrated in a new surface 
transportation reauthorization.
 ATA strongly supports the BUILD America 250 Act as negotiated and 
approved by the House Transportation & Infrastructure (T&I) Committee, 
and we welcome the privilege of working with Congress to advance a 
bipartisan, bicameral reauthorization bill to the President's desk. I 
am grateful to the Chairman, Ranking Member, and members of this 
important Committee for their support of key trucking priorities and 
the advancement of common-sense bipartisan bills such as the Household 
Goods Shipping Consumer Protection Act and the Promoting Resilient 
Supply Chains Act. We look forward to continued support of renewed 
investment in the roads, bridges, and safety programs that are 
critically important to America's economic wellbeing and growth.
 New technologies are changing the way that we all do business, 
across all roles and industries. Despite a multi-year freight recession 
that created perilous economic conditions for trucking companies of all 
sizes, motor carriers have met the needs of their customers by 
investing in technologies that increase safety and efficiency. The 
industry is currently deploying proven safety technologies and 
partnering with innovators to test new ideas and technologies that can 
help improve both highway safety and supply chain efficiency while 
paving the way for future economic growth.
 Thank you for holding this hearing to discuss opportunities to 
leverage technological innovation to improve highway safety, promote 
efficient supply chains that reduce costs for consumers, and ensure 
America's global economic leadership. I am grateful for the invitation 
to participate, and for your dedication to these key priorities.
Opportunities to Increase Highway Safety
 Ensuring that our roads are safe for both commercial vehicles and 
the motoring public is the north star of America's trucking industry. 
To that end, trucking companies make significant investments every day 
in proven safety technologies for their fleets. In 2022, ATA's Safety 
Spend Survey showed that the industry invested $14 billion annually in 
safety, an increase of over 40 percent above the preceding 2015 
survey.\5\ Federal regulatory reforms supported by ATA have reduced 
both the number of truck-involved crashes and the crash rate over the 
past several decades. However, more must be done to improve highway 
safety for all motorists.
---------------------------------------------------------------------------
 \5\ 2022 ATA Safety Spend Survey. American Trucking Associations, 
2023. https://www.trucking.org/news-insights/new-study-underlines-
trucking-industrys-commitment-safety.
---------------------------------------------------------------------------
 The simplest and most straightforward Congressional action that 
will put safer, cleaner trucks on the road is the repeal of the onerous 
12 percent Federal Excise Tax (FET) on heavy-duty trucks and trailers. 
This tax dates back to American entry into World War I and has grown to 
become a major disincentive--if not an outright financial barrier--to 
investments in new equipment. The FET adds around $24,000 to the cost 
of a new truck and over $6,500 to the cost of a new trailer, forcing 
companies to defer upgrading their fleets. ATA is grateful to 
Subcommittee Chairman Young and Sen. Alsobrooks for cosponsoring the 
bipartisan Modern, Clean, and Safe Trucks Act, which would eliminate 
this outdated tax and remove a significant impediment that deters the 
trucking industry from investing in new equipment.
 Additionally, ATA welcomes Congressional investment in Federal 
roadway safety programs and research on innovative approaches to 
safety, and we are grateful for our partnerships with agencies and 
technology innovators that are working to make our highways safer. 
Examples of this work include:

 Partnerships with DOT modal administrations such as the 
 Federal Motor Carrier Safety Administration (FMCSA) on crash 
 causation research and the National Highway Traffic Safety 
 Administration (NHTSA) on automated vehicle safety studies.

 Collaboration with the National Transportation Safety Board 
 (NTSB) sharing data and insights that support investigations 
 and safety recommendations impacting trucking and broader 
 safety of roadways.

 Joint initiatives with state departments of transportation 
 and state enforcement agencies, including through the 
 Commercial Vehicle Safety Alliance (CVSA).

 Engagement with technology innovators/developers, including 
 developers of advanced driver assistance systems (ADAS), 
 telematics, and emerging roadway safety analytics tools.

 Collaboration with academic research centers, including 
 university transportation centers (UTCs) and other 
 transportation research institutes that study crash reduction 
 strategies, human factors, and heavy vehicle safety 
 technologies.

 Through those collaborations, we continue supporting workable 
requirements to deploy proven safety technologies, improve drug testing 
to meaningfully curb the rise of impaired driving, and ensure 
compliance with Federal requirements for training and driver 
qualification to make highways safer for all road users.
Automatic Emergency Braking (AEB)
 Congress and the trucking industry need to ensure that the safety 
technologies on commercial vehicles enhance drivers' attention and 
alertness while behind the wheel. One technology that requires 
immediate attention is Automatic Emergency Braking (AEB). AEB, and the 
suite of tools that support it, is a prime example of a proven safety 
technology that can reduce and mitigate crashes. Because AEB was 
already a mature and broadly adopted safety technology in the heavy-
duty sector, in 2021, Congress directed the U.S. Department of 
Transportation (DOT) to mandate AEB on all new heavy-duty trucks and 
ensure the proliferation of this critical safety tool. ATA supported 
this action because AEB technology had been available for over a decade 
in the heavy-duty sector and had clearly demonstrated benefits. Since 
implementation began on a voluntary basis in the heavy-duty sector, AEB 
has matured significantly and improved its effectiveness, integration, 
and driver experience based on industry feedback.
 By contrast, in 2024, DOT proposed an AEB mandate for industry 
segments outside of heavy-duty trucking, for which the technology 
remains under development and has not been widely adopted. This action 
exceeded Congressional intent to focus on the heavy-duty trucking 
sector where the technology is mature. Because new developments for 
different vehicle configurations, brake technologies, and sensor 
placements are required, AEB is not widely available for deployment in 
medium-duty and (in particular) vocational vehicle segments. Proposed 
timelines for that proposed mandatory deployment are not practical. 
Industry is working on these issues, but the systems are not yet 
developed at the same level of effectiveness, integration, and driver 
experience as for heavy-duty trucks.
 The mandate also proposed overly aggressive braking standards that 
effectively treat AEB as a replacement for the driver, a standard for 
which AEB is not designed. AEB and the suite of tools around it have 
always been designed as driver assistance technologies. AEB is designed 
specifically to help the driver respond more effectively, buy time for 
the driver to avoid hazards, and potentially mitigate or avoid crashes 
whenever possible. Industry has spent immense time and effort building 
driver trust in this technology. Rolling the technology out 
appropriately is necessary to maintain that trust.
 ATA urges this Subcommittee to provide oversight of DOT on this 
matter to ensure that regulation focuses on heavy-duty AEB, that the 
DOT applies performance requirements that represent the design intent 
of the technology, and that DOT works with industry to overcome 
barriers to implementation. Industry is eager to work with the DOT on 
AEB beyond the heavy-duty sector, but these efforts should be separate 
and distinct so as not to delay a rule in heavy-duty which could save 
lives in the near term.
Distracted Driving
 Addressing distracted driving among all roadway users--commercial 
drivers and passenger vehicle drivers--is vitally important. ATA 
recognizes distracted driving--whether manual, visual, cognitive, or 
emotional--as a form of impaired driving. Any activity that diverts a 
driver's attention threatens roadway and industry safety and endangers 
all road users. Far too often, distraction is the cause of tragedy on 
our Nation's roadways. According to NHTSA, in 2022, distraction was a 
causal factor in 8 percent of fatal crashes and 12 percent of injury 
crashes. Distressingly, the true figures are likely much higher as 
distracted driving goes largely underreported in official statistics 
due to reluctance of driver admissions of distraction, difficulty for 
law enforcement to detect distraction, and inconsistent crash 
reporting.
 ATA welcomes collaboration with this Subcommittee and relevant 
stakeholders, including law enforcement, Federal and state regulators 
and legislators, safety advocates, and drivers, to tackle this 
epidemic. Effective and robust enforcement of existing handsfree and 
distraction laws is vital, and ATA supports federal, state, and local 
laws prohibiting handheld wireless device use while driving. These laws 
and policies should apply to and be strictly enforced among all 
motorists, not just commercial drivers, to promote safer roads. Because 
commercial drivers rely on essential in-cab technologies, lawmakers 
must consider how best to integrate the safe use of these vital tools 
while minimizing visual-manual interaction and distraction and allow 
safe use of hands-free technologies while vehicles are underway.
 ATA is committed to prioritizing awareness, enforcement, and 
technology-driven solutions that reduce distracted driving and improve 
roadway safety for all. We believe safety campaigns that highlight the 
grave consequences of distracted driving can lead to greater awareness 
and behavioral changes that ultimately lead to cultural shifts in how 
we think about and accept risky driving behaviors. We recognize that 
these shifts take time and continuous exposure to safety messaging, 
much like the cultural shift towards universal seatbelt use in the 
1990s. It is important for Congress to provide DOT necessary resources 
to sustain and amplify similar, ongoing distracted driving campaigns 
and awareness efforts in the upcoming reauthorization measure.
 We support Section 4002 of the BUILD America 250 Act, which 
proposes consolidating national priority safety programs and outlines 
six key areas, including impaired and distracted driving, that states 
must target in their safety plans. We encourage this Subcommittee to 
prioritize providing federal, state, and local resources to study the 
scope of distraction, develop and implement innovative technologies and 
practices for detecting distraction, and enhance enforcement to 
discourage this dangerous behavior.
Underrides Crash Data Collection
 Making investments in new safety technologies takes time as fleets 
purchase, sell, and upgrade their inventory. Investments need to be 
justified by concrete data showing a benefit to fleet safety. ATA 
welcomes key provisions in the BUILD America 250 Act that will help 
gather necessary, reliable data to inform Federal regulatory decisions 
around underride guard requirements. This data will in turn help fleets 
understand potential benefits as they evaluate and communicate costs of 
new equipment with regulators during the rulemaking process.
 Section 4002 of the BUILD America 250 Act directs the Secretary to 
provide technical assistance to states and local governments to improve 
safety data in key areas, including better quantifying the dynamics of 
drug usage in crashes that result in serious injuries or fatalities, 
state reporting alignment with the Model Minimum Uniform Crash 
Criteria, the use of safety data in transportation planning, and the 
reporting of underride crashes. Section 4002 ensures states are 
addressing the national priority safety initiatives in their highway 
safety plans and provides public visibility into state progress towards 
safety targets. Section 4016 of the bill then directs the Government 
Accountability Office (GAO) to study the quality of highway safety data 
used in Federal transportation programs. Specifically, the study must 
examine state-submitted safety data quality, including data on 
underride crashes. Under this provision, the GAO will be required to 
consult with state departments of transportation, state highway safety 
offices, transportation safety organizations, law enforcement, non-
profit organizations, and DOT before submitting a report to Congress 
detailing its findings and recommendations. ATA strongly supports this 
provision to ensure Congress and Federal regulators are working with 
reliable data when considering potential future regulations that will 
impact the trucking industry.
 ATA has actively participated for years in efforts to improve 
understanding of underride crashes and potential countermeasures. ATA 
was represented on the DOT's Advisory Committee on Underride 
Protection, established under the IIJA, to examine rear, side, and 
front underride issues and provide recommendations to the Secretary. 
Throughout the advisory process, ATA and other representatives on the 
Committee emphasized the foundational need for reliable crash data, 
rigorous cost-benefit analysis, and consideration of the operational 
impacts of any new equipment mandates.
 ATA's position has consistently been that decisions regarding 
additional underride guard requirements should be based on demonstrated 
safety benefits supported by comprehensive real-world data. Improved 
underride crash reporting and analysis, as proposed by the BUILD 
America 250 Act, will provide all parties with the necessary 
information to assess the effectiveness, feasibility, and costs of 
potential underride countermeasures before imposing new Federal 
requirements.
Protect NHTSA's Role in Setting Industry Standards
 ATA continues to support Congressional action to clarify an 
existing prohibition of states laws superseding NHTSA standards for 
motor vehicle safety. The trucking industry is grateful to the House 
T&I Committee for amending the BUILD America 250 Act to include a 
provision that would preempt lawsuits that seek to impose liability for 
failing to equip motor vehicles beyond federal motor vehicle safety 
standards. Amending Section 30103 of title 49, a key Federal statute 
that outlines how Federal motor vehicle safety standards interact with 
state regulations, would impact a broader spectrum of the trucking 
industry and provide the necessary legal certainty for both carriers 
and manufacturers.
 Under existing law--going back to the National Traffic and Motor 
Vehicle Safety Act of 1966, Pub. L. 89-563--when NHTSA promulgates a 
Federal motor vehicle safety standard, states are prohibited from 
issuing standards of their own on that same subject (see 49 U.S.C. 
Sec. 30103(b)(1)). Congress has charged NHTSA with promulgating 
``practicable,'' ``objective'' standards that ``meet the need for motor 
vehicle safety,'' (see 49 U.S.C. Sec. 30111(a)). Allowing states to 
promulgate their own equipment standards when NHTSA has acted 
undermines that decision.
 However, current law contains an exception that threatens to 
swallow the rule: it expressly provides that compliance with a NHTSA 
standard does not preempt ``liability at common law'' (see 49 U.S.C. 
Sec. 30103(e)). This invites legal uncertainty, undermines 
Congressional intent to empower NHTSA to promulgate nationally uniform 
motor vehicle safety standards, and threatens supply chain integrity. 
Given that the trucking industry operates in all 50 states and that the 
market for motor vehicles is national in scope, we strongly support 
NHTSA's role as the primary authority over motor vehicle safety 
standards and urge Congress to reaffirm that role in Section 30103 of 
title 49.
Support Deregulatory Efforts While Preserving Key Technology 
 Requirements
 ATA has welcomed and supported the Trump Administration's efforts 
to reduce undue burdens and costs on motor carriers without 
compromising strong safety regulatory protections. Regulated entities, 
including motor carriers, rely on thoughtful, well-written, and safety-
driven Federal regulations and guidance to ensure the utmost safety for 
commercial drivers and all who share the road. However, ATA recognizes 
that certain Federal rules and regulations that affect the trucking 
industry are redundant, outdated, or place undue burden on members of 
the trucking industry--in some cases, invoking compliance merely for 
compliance's sake rather than a material benefit to the industry or 
national interest. ATA applauds this Administration and DOT's efforts 
to swiftly review and take deregulatory action to remove unnecessary or 
outdated red tape and regulatory burdens all while promoting industry 
efficiency without undermining safety. Changes such as eliminating rear 
underride guard certification label mandates, which incur unnecessary 
costs without measurable safety benefits, updating roadside warning 
device requirements, and removing legacy trailer marking rules that 
apply to equipment no longer in service are examples of overdue 
deregulatory actions.
 While ATA supports regulatory reform, we strongly urge Congress and 
DOT to preserve proven, safety-enhancing regulations that would have 
negative material consequences on the safety of all road users if 
eliminated. Among these critical regulations is the Electronic Logging 
Device (ELD) mandate, which has delivered measurable reductions in 
hours of service (HOS) violations and crash rates since implementation. 
Repealing or weakening this mandate, which has been requested by some 
stakeholders, would be a step back for the industry as ELDs modernize 
compliance monitoring and enforcement without altering rest 
requirements. We also emphasize that any future changes to the 
underlying HOS rules, upon which ELD rules are predicated, must be 
grounded in data and scientific research. As previously mentioned, ATA 
supports continued advancement of life-saving technologies like AEB and 
opposes any slowing or reversal of progress on drug and alcohol testing 
reforms. Regulatory streamlining must not come at the expense of 
highway safety, and we commend DOT and FMCSA's approach to sound, 
practical deregulatory action.
 Finally, ATA strongly supports Congressional efforts to make 
permanent agency waivers that have repeatedly been shown through 
notice-and-comment rulemaking processes and agency determinations to 
have no adverse impact on highway safety. Accordingly, ATA is grateful 
to Senators Fischer and Peters for introducing legislation (S. 4669) to 
relieve stinger-steered automobile transporters of a requirement to add 
duplicative warning flags to overhanging vehicles. FMCSA twice waived 
the warning flag requirement for stinger-steered automobile 
transporters, citing that cars already feature reflective devices and 
that trailers are equipped with proper lighting and conspicuity 
treatments. A provision paralleling the bill led by Sens. Fischer and 
Peters was included in the manager's amendment of the BUILD America 250 
Act.
Autonomous Trucks
 America's truck drivers are the unsung heroes of our supply chain; 
they are the trucking industry's greatest asset. The groundbreaking 
developments in autonomous vehicle (AV) technologies offer 
opportunities to help improve the safety and productivity of those 
individuals, and to make trucking a safer and more appealing profession 
for the next generation of truck drivers. Approaching new autonomous 
technologies as an ``all-or-nothing'' binary where human drivers are 
either completely behind the wheel or entirely replaced by robots 
relies on a fundamental mischaracterization of the technology. 
Autonomous technologies exist on a wide spectrum. Gradual integration 
of automated systems into the driving profession will mean an 
evolution--not an elimination--of the job and will almost certainly 
boost both safety and operational productivity.
 The expertise and skill of America's truck drivers cannot be 
overstated. Each year, professional truck drivers safely navigate 
hundreds of billions of miles across America's diverse geography, side 
by side with the motoring public. Given the diversity of freight 
movement--including liquids, livestock, hazardous materials, large 
construction equipment, and oversize loads--and the variety of road, 
terrain, and weather conditions throughout the country, drivers will 
always play a crucial and necessary role in the logistics system that 
includes automated trucks. ATA believes autonomous trucks will improve 
supply chain efficiency while giving truck drivers greater flexibility 
in choosing their preferred routes. AVs are one of many tools for the 
trucking industry to meet the growing and changing demands of our 
economy without replacing the truck driving profession. As Congress 
explores opportunities to improve roadway safety for all drivers, 
groundbreaking developments in AV technologies, automated driving 
systems (ADS), and connected vehicle technologies offer immense 
opportunities.
 The Autonomous Vehicle Industry Association reported in their 2026 
State of AV report that autonomous vehicles have driven more than 360 
million miles on U.S public roads.\6\ This is roughly double the number 
of miles driven at the time I testified before this Subcommittee last 
year. At that time, I stressed the importance of a Federal framework 
that supports safe interstate testing and deployment of AVs, including 
commercial motor vehicles (CMVs), and that urgency is amplified today.
---------------------------------------------------------------------------
 \6\ 2026 State of AV. Autonomous Vehicle Industry Association, 
2026. https://www.theav
industry.org/state-of-av
---------------------------------------------------------------------------
 ATA celebrated the inclusion of a bipartisan, workable legislative 
proposal in the BUILD America 250 Act. Among other key provisions, the 
proposal would:

 1. Create a performance-based safety standard for AV CMVs operating 
 in interstate commerce;

 2. Establish stakeholder engagement opportunities to make formal 
 recommendations on DOT's AV rulemaking;

 3. Establish liability responsibilities and HOS requirements when 
 ADS is engaged;

 4. Give DOT the ability to preempt state laws and regulations when 
 deemed necessary;

 5. Provide parity with safety technologies for vehicle width 
 exemptions for ADS;

 6. Permit cab-mounted warning beacons for CMVs, something both AV 
 and traditional trucking companies can celebrate; and

 7. Support the future CMV workforce through workforce development 
 opportunities.

 ATA supports this proposal as negotiated in the House, which 
reflects bipartisan consensus, is supported by a broad range of 
stakeholders, and would create a Federal framework for autonomous 
trucks for the first time. This framework will contribute to greater 
roadway safety and U.S. economic competitiveness. ATA urges the Senate 
to move forward with similar legislation to keep our country at the 
forefront of this vital technology.
 We are grateful to Subcommittee Ranking Member Peters, Senator 
Lummis, and other members of Congress for pushing the Federal 
Communications Commission (FCC) to approve the deployment of Cellular 
Vehicle to Everything (C-V2X) technology. ATA concurs that connected 
vehicle technology has the potential to save lives on America's 
highways and to increase efficiency. Developing improvements such as 
signal priority will impact not only safety but also reduce congestion 
and help to drive down the overall cost of transportation.
 Similarly, we encourage Congress and Federal agencies to continue 
developing proactive policies at every opportunity to foster innovation 
and ensure that American leadership in the development of this 
important technology. Today's hearing is a promising recognition by 
this Subcommittee that AV and other advanced technology deployments 
have the potential to significantly enhance the safety, efficiency, and 
productivity of the U.S. freight and logistics systems. We look forward 
to supporting Congressional efforts to ensure that the technologies and 
vehicles that generate those benefits are developed, improved, 
implemented, and sold around the world by American companies.
Protect American Manufacturers and Trucking from Unsafe Connected 
 Vehicles
 ATA also strongly supports protecting American manufacturers and 
the trucking industry from unsafe vehicles, components, and connected 
vehicle software from China. We are grateful to Senators Moreno and 
Slotkin for their leadership on this issue and introduction of the 
Connected Vehicle Security Act of 2026, which would ban the import, 
sale, and operations of vehicles manufactured in China and ban the use 
of Chinese-developed connected vehicle technologies, such as software, 
and data systems on American roads.
 ATA shares the Senators' concern over Chinese influence in the U.S. 
transportation network and automotive supply chain, including the 
potential risks associated with Chinese-manufactured vehicles, 
connected vehicle technologies, and access to sensitive transportation 
data. As commercial vehicles become increasingly reliant on telematics, 
fleet management systems, safety technologies, and over-the-air 
software updates, it is important to ensure that foreign adversaries 
cannot exploit these systems to gain access to operational data or 
critical vehicle functions. ATA has engaged extensively with the 
Department of Commerce's Bureau of Industry and Security (BIS) on this 
issue, helping policymakers understand the unique role that connected 
technologies play in the trucking industry and the differences between 
commercial vehicles and passenger cars. As a result of this engagement, 
BIS ultimately excluded commercial motor vehicles from its initial 
connected vehicle restrictions and began developing a separate 
rulemaking tailored to the commercial vehicle sector.
 While ATA supports efforts to address legitimate security threats 
posed by Chinese-connected vehicle technologies, any restrictions 
affecting commercial vehicles should be implemented through a 
deliberate, risk-based approach that recognizes the complexity of 
trucking supply chains, avoids unnecessary disruptions to fleets and 
manufacturers that create operational or safety compliance challenges, 
and provides sufficient time for industry stakeholders to transition 
away from identified security risks. We encourage this Subcommittee to 
consider these realities and ensure any proposals regarding foreign 
influence in the automotive space reflect the technical differences 
between heavy-duty commercial trucking and passenger vehicles.
Strengthen Technology Safeguards at DOT
 ATA is grateful for this Subcommittee's ongoing attention to bad 
and unsafe actors that exploit gaps in FMCSA's systems and undermine 
the integrity of the legitimate supply chain. These entities compromise 
industry and roadway safety and security by defrauding and stealing 
from stakeholders at every level of our supply chain. We also applaud 
the DOT's ongoing efforts to utilize technologies, including modernized 
systems, enhanced vetting and fraud detection tools, and artificial 
intelligence to restore integrity to government systems that are 
regularly utilized by motor carriers and drivers.
Motus and Registration Integrity
 The entire supply chain--not just motor carriers but also shippers, 
property brokers, and freight forwarders--continues to experience 
increasing levels of fraud, cargo theft, and identity theft carried out 
by sophisticated criminal organizations and individual bad actors. Many 
of these schemes exploit weaknesses and gaps in DOT registration and 
credentialing systems through theft, purchase, manipulation, or misuse 
of DOT numbers, operating authority credentials, and carrier 
identities. Fraudsters often create shell companies, hijack existing 
carrier profiles, falsify ownership information, or acquire credentials 
associated with carriers that have strong safety records to evade 
scrutiny from regulators, law enforcement, brokers, and shippers. 
Similar tactics have long been employed by ``chameleon carriers,'' 
entities that abandon one corporate identity after accumulating safety 
violations, enforcement actions, or out-of-service orders only to re-
enter the industry under a new name and new credentials with no trace 
of their old identity. These schemes have been all too easy to carry 
out and have grown in frequency in recent years.
 Recognizing these challenges, FMCSA established a dedicated fraud 
prevention team in 2024 and has taken several steps to strengthen 
oversight of registration processes, improve business verification 
procedures, and reduce opportunities for credential theft and misuse. 
The agency has also suspended online PIN requests and implemented 
additional safeguards around account access and registration changes to 
help prevent unauthorized system activity.
 Most significantly, after years of development, FMCSA launched its 
modernized Motus Registration System in May 2026 to replace an outdated 
legacy registration platform. The predecessor system had security and 
technological gaps that made nefarious activity possible and lacked 
integration with other FMCSA applications and portals. Motus is 
designed to strengthen identity verification, improve ownership 
transparency, enhance data quality and cross-system validation, and 
provide greater visibility into relationships among carriers, owners, 
and affiliated entities. FMCSA has also begun transitioning toward a 
more streamlined registration framework centered on a single USDOT-
based identifier, reducing reliance on multiple standalone credentials 
that have historically been vulnerable to manipulation and misuse. 
Collectively, these improvements have the potential to significantly 
enhance FMCSA's ability to identify fraudulent applicants, detect 
chameleon carriers, and prevent unsafe operators from obtaining or 
retaining operating authority.
 A modern, secure registration system is more than an administrative 
improvement--it is a critical safety and security tool. When unsafe 
carriers or fraudulent actors can conceal their identities and 
repeatedly obtain new credentials, regulators lose visibility into 
safety risk and what is happening on the ground. Trying to identify 
these elusive bad actors strains existing enforcement resources without 
consistently removing these fraudulent entities from our roadways, all 
while legitimate carriers face unfair competition by non-compliant 
entities and increased exposure to fraud. By strengthening registration 
integrity and improving fraud detection capabilities, Motus can help 
restore confidence in FMCSA's credentialing systems, support law 
enforcement investigations, protect carriers and shippers from fraud 
and cargo theft, and promote a safer and more accountable trucking 
industry.
 While ATA strongly supports FMCSA's modernization efforts, 
continued oversight and investment by Congress will be necessary to 
ensure Motus achieves its full potential. As the agency continues 
refining the platform and addressing implementation challenges, 
Congress should ensure FMCSA has the resources, staffing, and 
technological infrastructure necessary to maintain a secure, reliable, 
and user-friendly registration system that effectively deters bad 
actors while minimizing burdens on legitimate carriers and brokers.
Cargo Theft and Freight Fraud
 This Subcommittee held a hearing on cargo theft in February 2025 
and provided a platform for the trucking industry to discuss the 
increasing sophistication of these schemes, as well as opportunities 
for DOT and other Federal agencies to combat broader supply chain 
fraud. As a result of that hearing, Subcommittee Chairman Young 
introduced the Securing American Freight, Enforcement, and Reliability 
in (SAFER) Transport Act, which strengthens Federal efforts to detect 
and eradicate freight fraud and cargo theft across the transportation 
ecosystem. ATA strongly supports Chairman Young's bill. Passing this 
legislation would be the most meaningful action Congress can take to 
equip DOT with the proper tools, technology, and authorities required 
to effectively mitigate sophisticated fraud schemes.
 The necessary counterpart to the SAFER Transport Act is the 
Combating Organized Retail Crime Act, which would establish the 
Organized Retail and Supply Chain Crime Coordination Center within 
Homeland Security Investigations (HSI) at the Department of Homeland 
Security. This center would serve as a central reporting repository for 
supply chain stakeholders to document theft and fraud events involving 
interstate commerce. Enhanced data sharing, trend analysis, and the 
ability to ``connect the dots'' across jurisdictions are indispensable 
to modern cargo theft investigations.
 ATA will continue working with members of the Subcommittee to 
attract cosponsors to both the SAFER Transport Act and the Combating 
Organized Retail Crime Act because a coordinated Federal effort to 
combat cargo theft is not only appropriate but essential. Only the 
Federal government possesses the investigative capabilities, advanced 
technical infrastructure, and national reach necessary to disrupt and 
dismantle these interstate and international crime rings.
End ELD Provider Self-Certification
 ATA strongly supports Section 5202 of the BUILD America 250 Act, 
which will crack down on fraudulent ELD providers. As this Subcommittee 
focuses on the importance of technology, ATA encourages active 
oversight of FMCSA's ongoing effort to ensure that the hours driven by 
safe, qualified drivers are properly tracked by federally mandated 
devices and according to HOS regulations.
 In recent years, the proliferation of fraudulent, manipulated, or 
noncompliant ELDs has emerged as a serious and rapidly evolving threat 
to both roadway safety and the security of the Nation's transportation 
network. ELDs are intended to provide an objective, tamper-resistant 
record of a driver's HOS compliance. When functioning properly, they 
help prevent fatigue-related crashes, support fair competition, and 
ensure that carriers and drivers operate within Federal safety limits 
and requirements. But the growing presence of devices that can be 
altered, remotely manipulated, or intentionally designed by foreign 
enterprises to evade Federal requirements has subverted the very 
purpose of the ELD mandate and undermines the providers and carriers 
committed to legitimacy and compliance.
 A core vulnerability stems from the current regulatory framework, 
which allows ELD companies to self-certify their devices through an 
online registry process. This system enables foreign-owned or overseas-
based companies to register, market, and supply devices with weak 
cybersecurity protections, opaque ownership structures, and remote-
access capabilities that blatantly disregard Federal ELD regulations 
and protections. In some reported cases, these foreign actors--entities 
that have self-certified through FMCSA processes and posed as 
legitimate ELD providers--have been able to make real-time edits to 
drivers' HOS logs at the request of drivers or motor carriers. This can 
occur within minutes of a driver being pulled over for an inspection 
and generated using artificial intelligence (AI), producing fraudulent 
HOS logs that, to the naked eye, appear entirely compliant and 
legitimate. These capabilities effectively mask HOS violations, 
compromise regulatory oversight, and allow unsafe operators to continue 
driving.
 The consequences of ELD fraud are certainly significant but also 
not yet fully understood. As such, Federal entities have taken these 
threats seriously. FMCSA has already announced changes that strengthen 
the ELD certification and review process for new registrants and 
revoked dozens of noncompliant devices in 2025. ATA emphasizes the need 
for stronger oversight of ELD manufacturers already listed in the 
registry, more rigorous vetting of devices before they are approved, 
swift removal of noncompliant devices, and mechanisms to hold carriers 
who use those devices accountable. ATA also supports the implementation 
of a third-party certification process for ELD providers and, in the 
more immediate term, measures that can be taken to identify and stop 
bad actors, such as real-time checks of drivers' HOS logs for common 
indicators of fraud, requiring all companies registering ELD devices to 
verify their footprint in the U.S., and enhancing FMCSA's response to 
potential incidents of fraud.
 ATA strongly supports FMCSA's recent enforcement actions and urges 
Congress to play a role in expanding Federal oversight and enforcement 
of ELD providers. A secure and trustworthy ELD registry is essential to 
maintaining the integrity of the HOS system, protecting compliant 
carriers, and reducing fatigue-related risks. As demonstrated by 
states' failures and lapses in oversight of CDL issuance, weaknesses in 
ELD oversight similarly create systemic vulnerabilities that can be 
exploited by those seeking to evade safety rules--or by foreign actors 
seeking to access or disrupt critical transportation data.
Issues Surrounding Marijuana Decriminalization
 Ensuring that our roads are free from drivers under the influence 
of controlled substances is a top priority for the trucking industry. 
Since the FMCSA Drug and Alcohol Clearinghouse launched in 2020, more 
than 345,000 positive drug tests among commercial motor vehicle drivers 
have been recorded, highlighting a persistent and alarming trend in 
substance use that threatens the safety of our Nation's highways.\7\ Of 
these positive drug tests, marijuana remains the leading drug violation 
among drivers, accounting for roughly 60 percent of positive tests 
annually, over 260,000 total--a troubling statistic that underscores 
its widespread use and potential impact on highway safety.
---------------------------------------------------------------------------
 \7\ Drug & Alcohol Clearinghouse: March 2025 Monthly Summary 
Report. U.S. Department of Transportation, Federal Motor Carrier Safety 
Administration, March 2025.
---------------------------------------------------------------------------
 Despite the alarming increase of positive drug tests and prevalence 
of impaired driving on our Nation's roadways, there is no universally 
agreed-upon standard or scientific threshold for marijuana impairment. 
Nor is there a mature technology available for law enforcement to test 
for impairment, such as what exists for alcohol and drunk driving. One 
of the most impactful contributions that Congress can make to 
technology developments in transportation would be to encourage the 
development of these standards and deployment of workable technology 
that would allow roadside detection of marijuana impairment.
 The longer-term outlook of a full rescheduling of all marijuana 
products raises safety concerns by weakening employers' zero-tolerance 
policies, compromising the current Federal drug testing program for 
safety-sensitive professions, complicating enforcement, and potentially 
increasing marijuana use among all drivers. Given the absence of a 
validated tool for measuring marijuana impairment and the fact that it 
already accounts for most drug violations in the FMCSA Clearinghouse, 
rescheduling marijuana would jeopardize the safety of millions of road 
users. This Subcommittee must ensure that effective and robust drug 
testing protocols for safety-sensitive occupations remain intact, and 
that transportation safety is prioritized regardless of the legal 
status of marijuana at the Federal level.
 ATA will continue working closely with DOT to remediate downstream 
consequences to its testing program and urges Congress, HHS, and other 
Federal partners to understand the implications of DEA's pending 
reclassification, assess any potential unintended consequences, and 
ensure that any future policy changes preserve DOT's authority to test 
safety-sensitive workers. Given the lack of a reliable impairment 
standard, maintaining the ability to test for marijuana remains 
essential to protecting highway safety. While ATA encourages Congress 
to continue supporting and providing resources for research on and 
development of a marijuana impairment standard, such as those 
provisions in the IIJA, we believe that in the absence of such tools, 
employers must be equipped with the most effective, reliable tools for 
ensuring a drug-free driving workforce.
 Furthermore, oral fluids testing offers employers a direct window 
into recent use of impairing drugs as a convenient, rapid, 
nonintrusive, and directly observable method. It has been proven to 
reduce, if not eliminate, instances of tampering or ``cheating'' and is 
ideal for post-accident and reasonable suspicion scenarios given its 
detection of recent use. This is particularly relevant within the 
context of the impending marijuana rescheduling and lack of a 
standardized impairment tool. Although oral fluid testing was approved 
for regulated use in 2023 by DOT, no U.S. laboratory has been certified 
to perform it. Thus, regulated employers cannot utilize this testing 
method.
 Additionally, ATA strongly supports providing additional resources 
and flexibility on testing methods, such as allowing oral fluids 
testing, to improve the rate of post-accident testing to determine 
whether CMV drivers involved in an accident were under the influence of 
illicit substances.
NextNav & Trucking Applications of the Lower 900 MHz Band
 A discussion on the impact of technology on our freight 
transportation networks would not be complete without a discussion of 
the ongoing efforts by NextNav to privatize an important part of the 
wireless spectrum for proprietary use.
 In April 2024, NextNav petitioned the Federal Communications 
Commission (FCC) for a rule change to assign a portion of the lower 900 
MHz band of spectrum to the company for use in testing, developing, and 
deploying a Position, Navigation, Timing (PNT) alternative to 
satellite-based global positioning systems (GPS). ATA, partners 
throughout the trucking industry, and a broad coalition of stakeholders 
including retailers and aviation, all strongly oppose this petition 
because of the important use cases of the spectrum for existing supply 
chain services. While this issue is not directly under the jurisdiction 
of this Subcommittee, the full Senate Commerce, Science, and 
Transportation Committee has an important role to play in overseeing 
the FCC and pushing back against an ill-advised effort to gatekeep 
vital portions of the spectrum.
 Trucking companies,\8\ retailers,\9\ utilities, tolling operators, 
port authorities, and an ecosystem of supply chain 
partners\10\,\11\ that span all modes of freight 
transportation have made significant investments in RFID-based 
solutions that help improve supply chain efficiency and drive down 
costs for consumers. In particular, the Lower 900 MHz band is used in 
trackers for supply chain security to thwart cargo theft, track 
equipment and inventory, bypass tolls, and bypass weigh stations to 
streamline inspections. These solutions allow for greater supply chain 
visibility that is valued by both shippers and individual consumers, as 
well as for management of equipment and the efficient movement of 
freight and people on our highways.
---------------------------------------------------------------------------
 \8\ United Parcel Service. (2026, April 14). UPS's RFID Sensing 
Technology Transforms Logistics Industry, Giving Customers 
Unprecedented Package Visibility and Reliability [Press release]. 
https://about.ups.com/us/en/newsroom/press-releases/customer-first/ups-
s-rfid-sensingtechno
logytransformslogisticsindustry-givingcu.html
 \9\ Walmart. (2025, October 22). Walmart and Avery Dennison 
Collaborate to Enhance Freshness and Increase Operational Efficiency 
Using RFID [Press Release]. https://corporate.walmart
.com/news/2025/10/22/walmart-and-avery-dennison-collaborate-to-enhance-
freshness-and-increase-operational-efficiency-using-rfid
 \10\ Michelin. Connective Innovations at a Glance. Michelin Tires. 
Retrieved June 5, 2026 from https://business.michelinman.com/by-
technology/connective-innovations#RFID
 \11\ Mile Marker 2026: The National Bypass Impact Index. PrePass 
Safety Alliance, 2026. https://prepass.com/impact-index/
---------------------------------------------------------------------------
 ATA recognizes the importance of strengthening the Nation's PNT 
capabilities and reducing reliance on GPS alone, particularly given 
growing concerns regarding signal disruption, jamming, and broader 
national security vulnerabilities. However, any effort to develop a 
terrestrial GPS backup system must be carefully balanced against the 
needs of existing spectrum users. NextNav's proposal would introduce a 
high-powered, wide-area network into a spectrum band currently used by 
low-power RFID and short-range communication technologies that support 
critical supply chain, transportation, retail, aviation, security, and 
healthcare operations. These systems were designed to operate in a 
shared environment and depend on reliable access to the Lower 900 MHz 
band. ATA and a broad coalition of stakeholders remain concerned that 
NextNav has not demonstrated a viable path for coexistence or 
adequately addressed the potential for harmful interference that could 
disrupt billions of dollars of existing infrastructure and create new 
operational, economic, and safety risks across multiple sectors of the 
economy.
DEF Flexibility
 As mentioned previously, modern trucks are safer than ever. Today's 
trucks are also much cleaner than previous generations. Sixty trucks 
manufactured today emit less than a single truck manufactured in 1985. 
These advances are the result of proactive efforts by trucking 
companies and manufacturers, guided by workable Federal emissions 
regulations. However, in recent years, the issue of safe, well-
maintained trucks being put out of service due to faulty diesel exhaust 
fluid (DEF) quality sensors or unreliable components in the emissions 
system has been a frustrating and growing issue for many truckers.
 ATA is working with leaders in Congress and the Environmental 
Protection Agency (EPA) to address this issue through legislative and 
regulatory reforms. ATA supports the flexibility EPA provided for 
truckers in guidance issued in August 2025 and March 2026 that allows 
drivers to move freight to its destination and equipment to an 
appropriate location for service in the event of an emissions system 
failure. EPA's revised guidance ensures that drivers will continue to 
use DEF and benefit from the resulting emissions reductions without 
severe speed limitations and unnecessary towing costs that create 
operational challenges for trucking companies and raise safety concerns 
for all road users.
 As we work with Congress, we are grateful to members such as Sen. 
Sullivan on this Subcommittee for his efforts to address this issue in 
the context of the unique concerns of Alaskans. Obviously, no one wants 
a truck to shut down or a driver to be stranded on the side of the road 
in subzero weather. We also encourage the members of this Subcommittee 
not to allow the erosion of air quality improvements the trucking 
industry has already achieved. The issues around DEF, engine de-rating, 
and induced losses of torque and speed are significant, but should not 
result in deleting system components, rendering emission systems 
inoperable, or making DEF use optional. ATA urges the Subcommittee to 
be mindful of, and to maintain Federal leadership in, setting and 
maintaining feasible emissions goals for key pollutants. Because of the 
willingness of states such as California to overreach and place 
unreasonable mandates on the trucking industry, clear Federal 
leadership is vital.
In Conclusion
 Thank you for the opportunity to testify on behalf of the 8.4 
million people in trucking-related jobs who power our Nation's supply 
chains and keep the wheels of the economy turning. Surface 
transportation reauthorization in the 119th Congress is a potentially 
transformational opportunity for our country. The ATA looks forward to 
supporting your efforts to improve the safe and efficient movement of 
freight across our Nation and to encourage economic growth.
 Thank you again for your leadership on these vital issues.

 Senator Young. Thank you, Mr. Spear.
 Our next witness is Ms. Laura Chace, President and CEO of 
the Intelligent Transportation Society of America, also known 
as ITS America. Ms. Chace has led ITS America since August 
2021. She has two decades of experience developing and 
implementing policy, including in roles at U.S. Telecom, the 
American Trucking Association, Justice Department, and the 
White House. Ms. Chace, you're recognized for five minutes.

 STATEMENT OF LAURA CHACE, PRESIDENT 
 AND CHIEF EXECUTIVE OFFICER, ITS AMERICA

 Ms. Chace. Chairman Young, Ranking Member Peters, members 
of the Subcommittee, thank you for the opportunity to testify 
today on how technological advances are strengthening our 
Nation's transportation system.
 This discussion comes at an important moment as Congress 
considers the next surface transportation reauthorization and 
the future direction of our transportation system. ITS America 
brings together the full innovation ecosystem, public agencies, 
private companies, and research institutions to advance a 
vision of a better future transformed by technology and 
innovation, one that is safe, smart, and connected.
 Our focus is not on supporting deployment of technology for 
technology's sake, but on ensuring that innovation translates 
into real world outcomes for the traveling public. Our 
transportation system has evolved. It is no longer just 
concrete, asphalt, and steel. Today, transportation is 
increasingly defined by a combination of physical 
infrastructure and digital capabilities.
 Sensors, software, communication networks and data systems 
are now embedded throughout the transportation network, 
creating a digital layer that allows agencies and operators to 
understand conditions in real time and respond more 
effectively. This evolution is already delivering measurable 
results. These developments point to a broader shift. Digital 
technologies must be treated as core transportation elements. 
They are fundamental to how the system operates, how it 
performs, and how it delivers outcomes for the American public.
 You can't manage what you don't understand and digital 
infrastructure fundamentally improves our ability to understand 
our transportation system. Treating technology as a core 
element means prioritizing it throughout entire project life 
cycles, from planning and building to operating and 
maintaining, and funding it at meaningful levels and in the 
same dedicated way that we do our traditional physical assets.
 Across the country, technology applications are improving 
safety. From smart signals and pedestrian detection systems in 
Bellevue, Washington, delivering a 40 percent reduction in near 
miss conflicts at intersections, to digital alerting systems in 
Illinois, increasing driver reaction distance and reducing 
harsh braking, to real time detection technology in Indiana, 
keeping workers safe in work zones. The impact on safety is 
real.
 Technologies are also improving lives and reducing costs. 
In Detroit, travel reliability was improved by 30 percent from 
advanced traffic management systems using real time data to 
optimize signal timing and reduce congestion. Tools that 
provide real time truck parking information, streamline way 
station operations and improve logistics planning also allow 
goods to get to your door more efficiently. Digital twins, 
sensors and AI-enabled inspection systems for roads and bridges 
provide engineers with predictive intelligence to better 
maintain our infrastructure, saving agencies hundreds of 
thousands of dollars annually.
 State and local transportation agencies are deploying these 
solutions today, but they are often doing so in fragmented ways 
that limit their full impact. To understand why that matters, 
it's helpful to consider a broader example. Think about the 
standalone computer. On its own, it delivers real value: 
processing information, storing data, improving productivity. 
But its full potential was realized when it became connected. 
The Internet transformed individual machines into a network 
that enables communication, coordination, and shared 
intelligence at scale.
 Our transportation system is now at a similar inflection 
point. Intelligent technologies are already delivering 
meaningful benefits at individual intersections, along 
individual corridors, and throughout individual states. But 
when those systems are connected through national interoperable 
digital infrastructure, they become something more powerful: a 
coordinated, responsive network that can operate as a system. 
Without that integration, we risk a future where deployment 
remains uneven and fragmented, limiting the safety, mobility, 
and economic benefits these technologies can deliver. 
Addressing that challenge is essential to unlocking the full 
value of innovation.
 Federal leadership plays a critical role. A clear national 
approach to transportation technology will provide direction, 
reduce fragmentation, and give public agencies and private 
partners alike greater confidence to invest. Establishing 
consistent national frameworks for areas such as automated 
vehicles, data privacy, and system interoperability can help 
ensure that innovation is deployed safely and at scale across 
the country. Just as providing funding flexibility and 
incurring outcomes-based approaches can help agencies deploy 
solutions that evolve over time and deliver measurable results.
 America has an opportunity to lead the world in 
transportation system modernization. Digital solutions, both in 
infrastructure and in vehicles, are poised to provide safety 
and operational benefits that can unlock the next chapter of 
America's transportation evolution. By aligning policy, funding 
and deployment strategies, this Congress can deliver to the 
American people the full safety, efficiency, and mobility 
benefits that these technologies offer.
 Thank you for the opportunity. I look forward to the 
questions.
 [The prepared statement of Ms. Chace follows:]

Prepared Statement of Laura Chace, President and CEO, On Behalf of The 
 Intelligent Transportation Society of America (ITS America)
 Chairman Young, Ranking Member Peters, full committee Chairman 
Cruz, Ranking Member Cantwell, and members of the subcommittee, thank 
you for the opportunity to speak today and highlight how technology is 
transforming and improving our Nation's transportation system. This 
hearing is particularly relevant given the backdrop of the current 
surface transportation reauthorization process and expiring authorities 
in September, and on behalf of our members, I appreciate the 
opportunity to share our perspective.
 My name is Laura Chace, and I serve as the President and CEO of the 
Intelligent Transportation Society of America (ITS America).
 ITS America is the Nation's leading advocate for the technological 
modernization of our transportation system by focusing on advancing 
research and deployment of intelligent transportation technology. ITS 
America was initially founded in 1991 as an advisory council to U.S. 
DOT on technology innovation and emerging transportation technologies. 
ITS America, now a nonprofit organization, is the only one in the 
country that represents all sectors--public, private, research and 
academia--to advance transportation technology in support of societal 
goals. Our vision is one of a better future transformed by 
transportation technology and innovation. One that is Safe, Smart, and 
Connected. Our membership includes state and city departments of 
transportation, transit agencies, metropolitan planning organizations, 
automotive manufacturers, technology companies, engineering firms, 
automotive suppliers, telecommunications providers and research and 
academic universities.
 Our work balances policy with innovation, accelerating the 
deployment of technology that saves lives on the road, makes travel 
more efficient, connects people to mobility options, improves 
transportation network operations, and increases return on investment 
for our infrastructure projects. ITS America's work focuses on 
connected and automated vehicle technologies, smart and digital 
infrastructure, artificial intelligence, tools that improve system 
efficiency and resiliency, and other technologies that support 
vulnerable road users, freight, public transportation, on-demand 
services, and advanced air mobility.
I. The Transformative Power of Technology in Transportation
 Our transportation system is evolving from one largely defined by 
concrete, asphalt, and steel to one that today includes sensors, 
software, data, and algorithms. Today's digital networks provide tools 
to link physical transportation assets with a digital intelligence 
layer, allowing us to gather, transmit, store, analyze, and communicate 
information in real time, and to use that information to increase 
safety, reduce congestion, and enhance mobility for every 
transportation user. Transportation digital infrastructure helps us 
gather information about our transportation system and infrastructure, 
providing agencies with crucial tools to make planning decisions, enact 
safety countermeasures, build and operate their system more effectively 
and at lower costs, and provide real time information to drivers and 
road users.
 This is no longer a theoretical, high-tech future. Technology 
solutions deployed today across our Nation's transportation system are 
delivering real outcomes. Tools like artificial intelligence (AI), 
vehicle connectivity, automated vehicles (AVs), digital twinning, 
advanced air mobility, and many other intelligent transportation 
systems (ITS) technologies are transforming the way people and goods 
move; how we plan, build, and operate transportation systems; and how 
we think about the future. Technology is now a core, essential element 
of our transportation system.
 These technologies are helping us solve some of our most pressing 
transportation challenges that cannot be solved by physical 
improvements alone. Solutions that allow agencies to proactively 
identify and address dangerous stretches of roadways, react in real-
time to reduce congestion, provide advance warning of severe weather to 
mitigate impacts, and provide faster emergency response are just some 
of the tools that make up this essential digital layer. As the pace of 
technology innovation continues to accelerate, we can leverage these 
tools to address the many challenges facing the U.S. transportation 
system today.
 It is well known that far too many people are injured or die on our 
Nation's roads each year. In 2025, the National Highway Traffic Safety 
Administration (NHTSA) estimates that there were 36,640 deaths on 
American roads.\1\ While this is positive progress from a few years 
ago, we still have much more work to do. Technology, both in the 
vehicle and infrastructure, provides an added safety layer that can 
help us change course and save more American lives.
---------------------------------------------------------------------------
 \1\ National Highway Traffic Safety Administration
---------------------------------------------------------------------------
 Traffic congestion is a key driver of economic harm and commuter 
misery. According to the U.S. Department of Transportation, the average 
auto commuter lost 63 hours stuck in traffic in 2024, costing nearly 
$1,500 each. This represents $269 billion in lost productivity and fuel 
costs. Advanced traffic management systems and AI-enabled systems can 
keep traffic moving efficiently across rural highways and urban 
streets.
 Infrastructure projects over the years have become more costly to 
complete and often run the risk of not being completed on time. 
According to research from Texas A&M University, just one month of 
delay can lead to over $4 million dollars for large projects.\2\ This 
remains a challenge if we want to operate and build a world-class 
transportation system that serves everyone from the urban streets of 
New York or Dallas to rural highways in Wyoming or Wisconsin. 
Fortunately, we have digital tools available today that can streamline 
project delivery, increase accuracy, and reduce time to completion.
---------------------------------------------------------------------------
 \2\ State of Texas
---------------------------------------------------------------------------
 Providing timely and safe access to transportation options remains 
a challenge in many communities. Research shows that millions of 
medical appointments are missed annually due to inadequate 
transportation options.\3\ Additionally, many people in both rural and 
urban areas rely upon on-time and safe public or on-demand 
transportation to reach critical goods and services, or just simply to 
see loved ones. Technology plays a critical role in ensuring not just 
the safety of these modes of transport, but also up-to-date information 
on service delays, payment options, and booking rides.
---------------------------------------------------------------------------
 \3\ Ruderman Foundation
---------------------------------------------------------------------------
 Our member companies are developing the innovative technology 
solutions that we have today, but as a country, we are not moving 
quickly enough to broadly scale these solutions throughout our 
infrastructure, vehicles, and broader transportation networks. Solving 
these pervasive challenges requires that we prioritize investments in 
technology solutions that will improve safety and mobility outcomes and 
remove existing barriers to deployment. The cost of not moving fast 
enough is not a net zero--it is measured in lives, time, and money 
lost. Coordinated Federal leadership, through strategic direction and 
funding, is necessary to spur greater deployment of these tools and to 
incentivize greater private sector investment.
i. Enhanced Safety
 Technology provides the opportunity to proactively address safety 
challenges in myriad ways, such as recognizing and predicting dangerous 
conditions that were previously unidentified, and helping road users 
and transportation agencies understand and address dangerous situations 
to prevent crashes before they happen. These tools also provide drivers 
with more information about the hazardous conditions around them on the 
roadway, allowing more time to react and make better decisions that 
improve safety. Technology can take us from a reactive system whose 
tools are largely focused on responding to fatalities to a proactive 
system that addresses issues before they result in a death or serious 
injury.
Vehicle Technologies
 Motor vehicle manufacturers continue to develop and deploy advanced 
technologies in vehicles, including SAE Level 4 and 5 automated 
vehicles (AVs), Advanced Driver Assistance Systems (ADAS), and Vehicle-
to-Everything (V2X) communications. These tools provide safety and 
convenience benefits to consumers today and will only continue to 
become more technologically advanced and interconnected with the 
broader transportation system.
 Automated vehicle technology is already transforming the way people 
and goods move in various parts of the country. Our members are 
deploying automated vehicle technologies in different ways and in 
different geographies- including robotaxis, transit shuttle services, 
and heavy-freight. In Iowa, researchers have even piloted ways to 
deploy AV transit services on rural gravel roads with unmarked lanes to 
support communities that need to get goods from farms to market 
reliably and efficiently. Options such as Zoox's or Waymo's robotaxis 
or Aurora's trucks (among many other operators), have the potential to 
transform mobility and improve safety on the road. AVs do not get 
distracted, drunk, or tired, offering the potential to prevent 
thousands of fatalities per year. It is not a question of whether the 
technology will work- but rather how we can enable safe scaling and 
integration with the existing transportation system through a much-
needed Federal framework.
 ADAS technologies are already responding to driver action or 
inaction to correct vehicle positioning, brake for other vehicles, 
assist in lane-keeping, and more. Over the years, automakers have made 
significant investments in ADAS, and these tools are probably what 
people are most familiar with in their vehicle today. The safety 
benefits are apparent. In some rural areas, nearly half of all crash-
related fatalities over the last seven years have involved lane 
departure, and ADAS can help mitigate these crashes.
 Vehicle-to-Everything (V2X) technology can play a greater role by 
providing drivers and other road users with critical information and 
improved awareness about roadway, traffic, and weather conditions 
before a user encounters them through the deployment of connected 
vehicles and infrastructure. The information exchange enabled by V2X 
communications, including spectrum-based, cloud-based, and cellular 
network solutions, can warn drivers about sudden braking, wrong way 
drivers, traffic queues, and other dangerous roadway scenarios beyond 
their line of sight, allowing them to take action to avoid vehicle 
pileups and other associated crash risks.
 Cloud-based digital alerting tools, like those from HAAS Alert, can 
alert motorists inside their vehicle that an emergency vehicle is 
nearby or that they are entering a work zone where workers may be 
present. When activated, these platforms deliver real-time digital 
alerts over cellular networks to approaching motorists. These alerts 
are received through navigation apps and connected car systems already 
in use by hundreds of millions of drivers, including Waze and other 
integrated displays, and enable drivers to reduce their speed and 
prevent a collision.
 A study in Illinois showed that digital alerting technologies 
increased driver reaction distance 4x more than just emergency lights, 
and led to reduced harsh braking compared to when there was no digital 
alert.\4\ This translates into safer driver behavior near emergency 
vehicles, queuing traffic, and roadside workers--reducing the chance of 
a collision. In Washington, D.C., data revealed that digital alerting 
applications helped D.C. Fire and EMS Department apparatus operators 
prevent collisions with other first responders.\5\
---------------------------------------------------------------------------
 \4\ Illinois Center for Transportation
 \5\ ITS America Use Case Library
---------------------------------------------------------------------------
 We are encouraged by the continuous innovation in the automotive 
market, and these are just a few examples of how vehicle technology can 
improve safety.
Infrastructure Technologies
 Modernizing our transportation infrastructure and treating 
technology as a core element of the system will help unlock numerous 
safety, efficiency, and mobility benefits for the traveling public. 
Today, states are already deploying technology within their 
infrastructure to help reduce crashes, improve transportation system 
operation, support vulnerable road user safety, identify incident 
hotspots, reduce congestion, improve emergency response, and plan safer 
physical infrastructure systems.
 For instance, our infrastructure is smart enough to detect when a 
person is still in the crosswalk and requires more time to finish 
crossing a street, allowing the infrastructure to automatically extend 
the light so that a person can safely complete the crossing. Technology 
can hold lights on red if it detects a speeding vehicle entering an 
intersection, preventing deadly T-bone collisions. Not only can 
technology work in real-time to prevent crashes, but it provides 
agencies with critical insights on near-misses or crash hot spots so 
that agencies can enact the proper safety countermeasures.
 Using cameras, fixed lidar technology, adaptive signals, and AI 
algorithms, cities like Bellevue, Washington have demonstrated success 
when deploying pedestrian detection technology with the help of 
companies like Derq, AWS, and Ouster. Some cities in the U.S. have seen 
a 33 percent reduction in crashes year-over-year after deploying AI-
powered technology to detect potential conflict between pedestrians and 
vehicles and proactively alert agencies to adjust traffic patterns to 
prevent crashes.
 Rural communities suffer a disproportionately higher burden of 
traffic fatalities and sometimes face unique challenges due to a lack 
of broadband infrastructure and network connectivity.\6\ However, many 
states are deploying technology and wireless infrastructure along their 
rural interstates to help improve traffic management and bolster 
safety. States like Georgia are investing in fiber infrastructure 
across rural areas to support ITS, while Texas and North Carolina are 
deploying connected freight corridors with in-cab alerts for work 
zones, weather, and incidents on rural interstates. Iowa is piloting a 
safety alert system for motorists when slow moving agricultural 
equipment is on the road--this includes sensors on the roadside and on 
the tractors with dynamic message signs to warn motorists.
---------------------------------------------------------------------------
 \6\ National Highway Traffic Safety Administration
---------------------------------------------------------------------------
 Roadway workers face daily risks from high-speed traffic and 
rapidly changing conditions, but technology is transforming how we 
protect them. Smart work zones use sensors, connected vehicle data, 
telematics, and AI-driven analytics to monitor safety hotspots, detect 
hazards, and deliver real-time alerts to both workers and approaching 
drivers. Intrusion detection systems can warn workers immediately when 
a vehicle enters a restricted area, providing critical seconds to take 
protective action. At the same time, digital alerting platforms can 
notify drivers in advance that they are approaching a work zone or 
roadside incident, improving reaction time and reducing sudden braking 
and secondary crashes.
 Rekor helped Texas identify near miss hotspots by showing the 
transportation agency data about wrong way driving and dangerous 
pedestrian crossings. This allowed the agency to make improvements to 
physical infrastructure to immediately enhance safety. Additionally, AI 
tools can detect crashes well in advance of the traditional method of 
receiving a 9-1-1 call, automatically alerting first responders. This 
has allowed EMS to respond to incidents by an average of 11 minutes 
faster, while reducing the chance of secondary crashes and maximizing 
public agency resources.
 Wrong-way driving crashes are among the most severe events on our 
roadways, often resulting in high-speed, head-on collisions with 
devastating consequences. Many states today are deploying 
infrastructure-based solutions that can detect vehicles traveling in 
the wrong direction using radar, thermal imaging, and cameras, 
triggering immediate warnings through flashing signage and connected 
alerts to the driver and nearby vehicles. These systems can also notify 
traffic management centers and law enforcement in real time, allowing 
for rapid intervention before a crash occurs. By combining real-time 
detection, dynamic signage, and in-vehicle alerts, technology can 
actively prevent wrong-way driving incidents and alert authorities to 
take action before a tragedy happens.
 These are just a small sample of the technologies available today 
to improve transportation safety, with many more applications available 
today and under development relating to weather-related issues, 
flooding, bridge heights, and natural disaster response.
ii. Greater Efficiency
 Advanced traffic management technology, such as cloud-based 
platforms and AI-powered tools, can help monitor traffic using real-
time data and optimize traffic flow. Connected, smart traffic signals 
can maintain safety while promoting the efficient flow of traffic for 
all road users--vehicles, buses, and even cyclists. In one example, 
Detroit, Michigan saw a 30 percent decrease in travel times at major 
intersections after deploying advanced traffic management solutions 
from Miovision, while also reducing maintenance costs by 20 percent.\7\ 
This solution was similarly used in eight intersections in Anne Arundel 
County, Maryland to eliminate 17,200 hours of road user delay annually.
---------------------------------------------------------------------------
 \7\ Detroit's Mobility Evolution | Miovision
---------------------------------------------------------------------------
 Technology can simplify and optimize the process of retiming 
intersections to better manage existing traffic patterns and 
congestion, significantly reducing the burden this costly and time-
consuming process places on public agencies across the country. There 
are over 350,000 traffic signals in the U.S., and data shows that it 
takes 70 manual hours to retime one intersection.\8\ There are tools 
today, such as those from Flow Labs, that can optimize traffic signal 
timing almost instantaneously, generating optimized timing plans with a 
click of a button and integrating directly with traffic signal 
controllers for updates. In an era of constrained fiscal budgets and 
growing infrastructure needs, these technologies are helping our cities 
make limited transportation dollars go further while improving travel 
for residents.
---------------------------------------------------------------------------
 \8\ Flow Labs
---------------------------------------------------------------------------
 North Carolina recently announced it is installing 2,500 AI-based 
traffic signals--an investment that will help the state bypass costly 
hardware installations and improve signal timing based on real-world 
traffic patterns. Additionally, the Delaware Department of 
Transportation won a SMART grant award from USDOT in 2023 which led to 
successful demonstrations of infrastructure-based V2X systems that 
would improve safety and traffic management in the state, with Delaware 
now ready to deploy these tools more widely if funding becomes 
available.\9\
---------------------------------------------------------------------------
 \9\ Future-Ready Delaware: SMART Technology Enhancements for Safe, 
Resilient Intersections
---------------------------------------------------------------------------
 Parking for truck drivers remains a persistent problem on our 
Nation's interstates and can cause significant safety and quality of 
life issues on the road. In addition to building new parking spaces for 
drivers, companies are deploying technology in partnership with public 
agencies to help maximize existing capacity and provide drivers with 
up-to-date real-time information on truck parking availability. New 
Mexico is doing exactly that--leveraging AI-enabled sensing technology 
to fuse data from radar with video to provide real-time availability to 
truck drivers and help the state manage its truck parking 
facilities.\10\
---------------------------------------------------------------------------
 \10\ Omnisight--New Mexico
---------------------------------------------------------------------------
 Additionally, innovative freight weigh station bypass technologies 
by PrePass have led to $12 billion in operational cost savings and 136 
million driver hours saved over the lifetime of the technology.\11\
---------------------------------------------------------------------------
 \11\ PrePass
---------------------------------------------------------------------------
 These are all critical tools that warrant further investment to 
support freight networks across the country so that our economy 
continues to thrive and we keep goods moving on time and safely.
iii. Smarter System Management
 Digital tools can help agencies identify and prevent issues in 
their system, manage assets smarter, and improve project delivery 
times.
 Technology can detect structural issues in bridges and roads early 
on and monitor for further wear-and-tear. Traditional methods involve 
manual inspection, which can be costly and time consuming for public 
agencies. New inventions use computer vision AI, virtual reality tools, 
sensors, and drones to proactively collect images and videos of defects 
in roads and bridges that humans may not be able to see. While cameras 
continually monitor the asset, software processes and analyzes the 
collected data, providing engineers with a safety assessment that 
includes information about structural changes and weaknesses, as well 
as immediate damage.
 New technologies can help public agencies monitor the health of 
bridges and detect issues before a disaster happens. Structural health 
monitoring using sensors provides real-time data to allow engineers to 
detect stress, movement, or structural damage on bridges and roads--
giving workers more tools to investigate and remedy infrastructure 
deficiencies. Through the U.S. DOT's SMART grant program, West Virginia 
is deploying this technology on the Gunner Gatski Bridge to help manage 
infrastructure in a smarter, safer way.\12\ Many other places, 
including the cities of Denver and Seattle are using digital twins and 
sensor technology to monitor bridge health. Texas DOT is using drones 
to monitor bridges and inspect aerial structures, gathering critical 
data for contractors and engineers.
---------------------------------------------------------------------------
 \12\ West Virginia Daily News
---------------------------------------------------------------------------
 Innovative technologies can also significantly improve roadway 
management. State and local governments oversee hundreds or even 
thousands of miles of roadway, making asset management costly and 
cumbersome. Tools such as dashcam footage and machine learning models 
combine to analyze roads for striping visibility, guardrail detection, 
damage, debris, and pavement conditions--often identifying issues 
beyond what the human eye can detect. Hawaii has utilized these tools 
from Blyncsy to save over $900,000 in maintenance costs per year, 
reducing the need for cumbersome manual surveys by nearly 95 percent 
and reducing emissions from work vehicles that now have to travel less 
often.\13\
---------------------------------------------------------------------------
 \13\ Blyncsy
---------------------------------------------------------------------------
 We know that project delivery challenges, whether for highways, 
transit, rail, or otherwise, can be a serious roadblock to improving 
transportation systems in the United States. Digital twinning 
technology now exists that aids and accelerates infrastructure 
planning, design, and construction, giving engineers digital 3D and 4D 
models that improve contractor workflows, simplify public 
communications, and identify issues before construction. This 
represents a generational shift from traditional paper-based planning 
to model-centric frameworks where digital models become the primary 
deliverable. Modern infrastructure development increasingly requires 
integrating previously disconnected data sources--such as lidar, 
imagery, inspection records, sensor data, and asset inventories--into a 
digital ecosystem. Real-time asset management requires the most up-to-
date data, making digital twinning technology and digital construction 
tools vital to project delivery.
 These innovations are transforming the way public agencies plan, 
design, build, operate and maintain the transportation systems American 
rely on, bringing critical data and intelligence into every aspect of 
the project lifecycle. With such innovative tools at our fingertips, we 
should ensure that their use is incentivized and encouraged by state 
and local agencies nationwide.
II. Scaling Faster: Technology is a Core Element of the Transportation 
 System
i. National Approach to National Challenges
 Transportation challenges in one area of the country impact all of 
us. Roads and bridges cross state lines, but so do people, vehicles, 
goods, and data. To help scale technologies in transportation, national 
leadership is required. In addition to setting common goals, national 
leadership helps de-risk technology investment for the public sector 
and encourages broader investment in core technology tools.
 A national vision for our transportation digital infrastructure 
would set a gold standard for U.S. transportation innovation and signal 
to not only public agencies but also the private market that these 
technologies should be accelerated. It would bring together a network 
of successful, but currently fragmented, projects across 50 states 
toward shared common goals. That fragmentation limits the impact of 
innovation, constrains market growth, and ultimately leaves safety and 
mobility gains on the table. The Office of Research and Technology at 
U.S. DOT is already undertaking some of these efforts, but Congress 
should work hand in hand with its agency partners to set a national 
approach and implementation plan to make this a reality.
 Much like digital infrastructure, automated vehicles are a key part 
of reducing traffic fatalities and improving access to mobility. In 
recent years, states have set the pace on AV policy, but it is 
important for the Federal government to establish a Federal framework 
that supports safe and responsible AV deployment across the entire 
country. This includes establishing Federal guidelines on safety cases 
and crash data reporting, and modifying existing vehicle safety 
standards to allow for the use of AVs with innovative designs (i.e., 
without manual driving controls or purpose-built transit vehicles). In 
the freight sector, this also means allowing for the use of innovative 
warning beacons and other safety technologies, instead of requiring 
manually placed warning triangles on the side of the road when a truck 
becomes disabled.
 As part of any Federal AV framework, it is important that all 
stakeholders--including private industry, states, cities, organized 
labor, safety advocates, and others--are at the table for these 
critical conversations. We know the technology is ready, but we must 
work together to implement it in a way that integrates safely with the 
existing transportation system.
 Finally, a national data privacy framework is essential for the 
continued deployment of transportation technologies in a way that 
fosters consumer trust, protects privacy, and applies nationally so 
that all may benefit. The transportation industry and its users 
flourish when there is certainty and reliability, and the same applies 
to data privacy protections for ITS and transportation technology. A 
patchwork of state and local data privacy laws hinders the ability to 
scale life-saving technology that relies on accurate data.
 Companies are innovating and eager to develop and deploy technology 
solutions in the United States. As budgets across all sectors of the 
economy, especially public agencies, become tighter, we need 
innovative, cost-effective solutions that will help current 
transportation spending go further while making meaningful improvements 
to safety and mobility outcomes.
 Coordinated Federal leadership that recognizes technology solutions 
as core elements of our transportation system can help bridge that gap. 
Whether it's through setting strategic priorities and frameworks, 
providing financial incentives, or breaking down certain institutional 
barriers, the Federal government has an important role to play. Strong 
Federal leadership can unlock a scaled domestic marketplace, support 
American innovation, and strengthen our competitive position globally--
particularly as countries like China move aggressively to integrate 
technology into their transportation systems as a matter of national 
strategy. That leadership can simultaneously provide important 
cybersecurity, privacy, and general policy safeguards that will help 
ensure that emerging technologies are deployed in a way that maximizes 
their public good. The private sector is ready, and the technology is 
ready. The question is whether Federal policy will treat it with the 
urgency and importance it deserves.
ii. Incentivizing Scaled Adoption
 Technology deployments are often fragmented into pilots and 
demonstration projects that prove successful but are unable to scale 
beyond local areas or across state lines due to lack of 
interoperability, lack of dedicated long-term funding, and procurement 
challenges.
 At the Federal level, current technology funding comes primarily 
from discretionary grant programs, such as the SMART grant program and 
the Advanced Transportation Technology and Innovation (ATTAIN) grant 
program. Many public sector agencies, however, are looking to move 
beyond a pilot and demonstration approach, given that much of the 
technology now is maturing and has demonstrated success. Moving from 
pilots to true operational deployments and scaling nationwide is key to 
seeing even greater measurable benefits.
 ITS projects are eligible under most Federal formula programs 
administered through the Federal Highway Administration. However, many 
states experience a common friction point--how do we prioritize both 
our physical and digital infrastructure when there are limited Federal 
dollars to go around? Because of this, many states and cities often 
must rely on state and local funding sources to deploy technology and 
build their transportation system's digital infrastructure. Funding 
stability and certainty are critical to deploying technology at scale 
in our transportation system, and U.S. DOT and Congress can help ensure 
that funding is prioritized when crafting policies for Federal 
programs.
 Technology projects have distinct characteristics from physical 
transportation projects. Unlike building a bridge or highway, 
technology deployments are not a single, massive project, but often a 
series of smaller projects that come together to deliver outsized 
outcomes. Since transportation technology is not delivered all at once, 
it requires certainty to allow for multi-year deployment and continuous 
improvement as new capabilities are developed that can help agencies 
transform operations and improve safety.
 Many of today's transportation technologies were not even 
contemplated when much of our country's infrastructure was constructed, 
and the Nation's economy and the mobility needs of our country have 
changed considerably in recent decades and will continue to change 
rapidly in the coming years.
 Previous surface transportation legislation from Congress laid a 
strong foundation for ensuring that the United States remains the 
international leader in the research and development of transportation 
technologies--this commitment is evidenced through programs like ARPA-
I, investment in our University Transportation Centers, and continued 
support for research into innovative transportation technology 
solutions. Research and development, especially for high-risk, high-
reward projects, is vital for the transportation sector. Without 
dedicated, standalone support for ITS technology deployment, however, 
we risk a situation where the United States develops innovative 
transportation tools, only to see our global competitors out-produce 
and out-deploy those same tools. We must ensure that our country's 
policies keep pace with the rate of American technological innovation.
 Beyond incentives, procuring technology and software as 
infrastructure assets can be challenging to public agencies. Current 
procurement methods were developed to purchase hard infrastructure 
through one-time purchases. Data streams, software licenses, and even 
cloud storage services are key to the transportation system today but 
were unheard of in infrastructure procurement even thirty years ago. 
These solutions are distinctly unique from physical assets--they are 
not one-time purchases and may require annual fees or licenses, require 
ongoing maintenance to ensure cybersecurity and data integrity, and can 
improve performance and value over time, unlike a static physical 
asset.
 We can ease the barriers to procuring technology by adopting 
outcomes and performance-driven metrics, rather than rigid technical 
specifications. State and local transportation agencies would benefit 
from additional Federal guidance on standards, definitions, and best 
practices around technology procurement. Shifting towards an outcomes-
based approach encourages wider innovation and more competition in the 
marketplace and unlocks greater flexibility in deploying technology 
solutions that fit a specific community's needs.
III. Conclusion
 Technology is a core element of how Americans move. Digital systems 
guide us on our daily commutes, deliver goods to our doorstep, keep us 
safe as we move about our communities, and ensure that the systems we 
rely on every day are resilient and reliable. As we build for the 
future, we must include technology as an essential part of our 
transportation system to meet the needs of future mobility while 
delivering better safety and operational outcomes.
 American innovation and ingenuity continue to lead the world. We 
currently have the opportunity to harness this American advantage in 
the communities where we live, work, and play to realize better 
transportation systems and safer streets across the country.
 ITS America is grateful for this Subcommittee's desire to discuss 
technology applications in the surface transportation sector, and we 
look forward to working with you on these issues going forward.

 Senator Young. Thank you, Ms. Chace.
 Our final witness is Mr. Cole Scandaglia. Mr. Scandaglia is 
the Deputy Director of the Department of Political and 
Legislative Action at the International Brotherhood of 
Teamsters, a union that represents over a million workers 
across numerous industries in the United States and Canada. 
Welcome, Mr. Scandaglia. You are now recognized for five 
minutes.

 STATEMENT OF COLE SCANDAGLIA, DEPUTY DIRECTOR, INTERNATIONAL 
 BROTHERHOOD OF TEAMSTERS

 Mr. Scandaglia. Chairman Young, Ranking Member Peters, 
members of the Subcommittee, thank you for the opportunity to 
testify today on this important topic.
 Teamsters represent 1.3 million hard working people in the 
United States, Canada, and Puerto Rico, including hundreds of 
thousands of employees in the rail and trucking industries. For 
our entire history, we've evolved alongside new transportation 
technologies. Our namesake refers to the men who once drove 
horse drawn wagons across the country and the first ever 
transcontinental shipment of goods by truck was conducted by a 
team of Teamster drivers in 1912.
 At the core of our mission, we believe that the tool 
available to the American worker to best navigate the impacts 
of technological change is a collective bargain agreement. 
Every day we use these tools to negotiate the terms of new 
technological deployments in a manner that ultimately benefits 
both our members and our employers. We do not oppose 
innovation. We welcome the adoption of technologies like 
automatic emergency braking and electronic logging devices and 
trucking, and the deployment of positive train control in the 
railroad industry.
 We will continue to work with Congress, regulators, and our 
employers on technologies which improve working conditions and 
increase safety on the job. Today, autonomous vehicles present 
enormous challenges. To date, the Federal Government has failed 
to advance an autonomous vehicle's framework, and the sole 
unique requirement to operate an autonomous vehicle in this 
country is to inform the National Highway Traffic Safety 
Administration of crashes.
 Continuing to permit the unfettered and unregulated 
operation of autonomous vehicles is a no win situation for the 
country. We continue to call Congress to create a binding 
framework that prioritizes safety, the workforce, and goes 
beyond weak self certification regimes. We also urge members to 
consider the economic impacts of mass deployment of unregulated 
autonomous vehicles on both our members and your constituents. 
Driving a truck is the single most common occupation for men in 
the United States without a college degree and a top 10 
occupation overall in most states.
 More generally, increasingly connected transportation 
technologies also invite risk by bad actors and foreign 
adversaries. Teamsters believe strongly that connected vehicles 
and components from China must not be imported into the United 
States, that Chinese companies who open shop here should never 
receive a penny of Federal transportation dollars, and Congress 
must prohibit any scenario in which a person outside this 
country can operate or manipulate a vehicle on our roads.
 In the railroad industry, we're proud to represent the 
Brotherhood of Locomotive Engineers and Trainmen and the 
Brotherhood of Maintenance of Way Employees. As two of the 
country's oldest unions, our rail members have adapted to 
extraordinary technological change. However, it is essential 
that Congress and the Federal Railroad Administration 
appreciate that tools are supplemental to our work, not a 
replacement.
 Track Geometry Measurement Systems, also known as ATI 
Automated Track Inspection, use advanced sensors, lasers and 
machine vision to identify track defects that may not be 
visible to the human eye. However, these systems are only 
capable of identifying certain regulatory defects, not all 
which must be evaluated under current regulation.
 We don't oppose this technology, in fact, we've called for 
it to be mandatory. But combining this technology with human 
visual inspections conducted on a twice weekly basis as 
currently prescribed in the regulations, is the equation for 
optimal safety outcomes.
 Locomotive engineers have also seen massive changes within 
the last 15 years, including the use of PTC as well as energy 
management systems like Trip Optimizer. Again, these 
technologies have value if used properly. Increasingly, 
however, we are seeing usage which takes away a substantial 
amount of decisionmaking from crews for up to 95 percent of 
trip time. These extensive periods of time risk deskilling of 
engineers, who may in turn be unprepared when asked to reassert 
control in a scenario where the technology fails or an 
emergency presents itself. Minimum time spent in manual 
operations can combat these effects.
 Further, the BLET continues to sound the alarm on the use 
of remote control locomotives, which are generally operated by 
an engineer who's not physically present in the cab. These 
operations carry risk already when operating in a yard 
environment, but are increasingly being used on mainline track 
and rail sidings, which invites unacceptable dangers.
 Across all modes, including those subject to this 
subcommittee and the full committee, the Teamsters Union 
continues to support strong prescriptive regulations where 
warranted. Innovation, regulation and the workforce need not be 
in conflict with each other, and we commit to working with the 
Committee and the Subcommittee to that effect. Appreciate the 
opportunity to testify today and look forward to questions.
 [The prepared statement of Mr. Scandaglia follows:]

 Prepared Statement of Cole Scandaglia, Deputy Director, Department of 
 Political and Legislative Action, International Brotherhood of 
 Teamsters
 Chairman Young, Ranking Member Peters, and members of the 
Subcommittee, thank you for the opportunity to testify today on ``The 
Need for Speed: How Technological Advances are Driving Transportation 
Innovation.'' The International Brotherhood of Teamsters represents 1.3 
million hardworking people in the United States, Canada, and Puerto 
Rico, including hundreds of thousands of members in the transportation 
industry including in commercial trucking. In the railroad industry, we 
are also proud to represent the Teamsters-affiliated Brotherhood of 
Locomotive Engineers and Trainmen (BLET) and the Brotherhood of 
Maintenance of Way Employes (BMWED).
 Throughout our history, the Teamsters Union has been at the 
forefront of adapting to and evolving with technological changes that 
fundamentally impact our work and workplaces. Our namesake refers to 
the men who drove horse-drawn wagons across the country, serving as the 
lifeblood of our economy and the origins of our freight network. By 
1912, appreciating the promises of internal combustion vehicles, a 
group of Teamsters participated in the first transcontinental delivery 
of goods by truck, hauling three tons of soap from Philadelphia to 
Petaluma, California.
 Since then, our union has expanded greatly, organizing members 
across the Nation in innumerable industries and crafts. Technological 
change and advancement have, and will continue, altering these 
occupations and what work may look like day to day. Fundamentally, we 
are supportive of technologies that improve working conditions and 
safety for our members, or that offer new opportunities which did not 
exist previously. The Teamsters will continue to rise to the occasion 
and ensure that the evolution or creation of jobs also entails the 
ability of workers to choose to join a union--and the protections, 
wages, and improved conditions that are inherent to doing so.
 We also fundamentally assert that the most powerful tool available 
to the American worker to best navigate the impacts of technological 
change is a collective bargaining agreement. It is the only method by 
which workers have an opportunity to directly engage with their 
employers over the deployments of new technologies and provide the most 
valuable data while doing so--the perspectives of individuals who will 
directly interact with such technologies and can address both positive 
and negative impacts of such deployments.
 The Teamsters have been the vanguard of these efforts, increasingly 
using the collective bargaining process to create formal structures, 
such as technology committees, in which our members have direct and 
binding channels to negotiate the terms of new technological 
deployments in a manner that ultimately benefits both our members and 
our employers.
Teamsters and Technology
 In recent years, Teamsters have championed and welcomed the 
adoption of numerous technologies in our workplaces. In the trucking 
industry, we have long supported the adoption of Automatic Emergency 
Braking systems in Class 7 and 8 heavy duty trucks--which were largely 
already installed in many of our vehicles even prior to the Federal 
mandate. The replacement of paper hours of service logs with Electronic 
Logging Devices is an important step in ensuring compliance with 
critical safety mandates and keeping unscrupulous operators off the 
road.
 We've also bargained over the use of non-regulated technologies, 
ranging from in-vehicle telematics to package tracking equipment, to 
efficiency technologies in warehousing.
 BLET represented locomotive engineers spent years calling for 
installation of positive train control (PTC) systems long before their 
Congressionally mandated deployment. These systems provide an extra 
layer of safety to help prevent collisions, derailments, and 
conflicting train movements, and in coordination with qualified 
locomotive engineers demonstrably improve outcomes.
 Across their long history, BMWED members charged with inspecting 
and maintaining track and railroad infrastructure have engaged with 
innumerable fundamental changes to their workplaces from the deployment 
of hydraulic tools to the development of production tampers, to the use 
and standardization of continuous welded rail in the industry.
 In all of these cases, and in many more across our union we have 
welcomed the adoption of new technologies that improved the jobs of our 
members as they functioned alongside them.
 It is also the case that positive opportunities for new technology 
exist outside of the physical operation of modes of transportation. 
Chairman Young's SAFER Transport Act considers the use of A.I. tools to 
identify patterns in Federal Motor Carrier Administration (FMCSA) 
registrations and safety data that are suggestive of the presence of 
chameleon carriers, fraudulent registrations, or double brokering. 
These flags would then be reviewed by FMCSA staff, who could then 
launch investigation or enforcement action. Given the vast universe of 
regulated entities FMCSA is responsible for overseeing, and the dangers 
presented by carriers operating unlawfully, providing AI tools in 
concert with human review to make actual investigatory and enforcement 
decisions could prove beneficial in addressing pressing safety 
concerns.
Autonomous Vehicles
 There is likely no technology with a disruptive impact as wide 
reaching as autonomous vehicles, including autonomous commercial motor 
vehicles. We are seeing commercialized deployments of these vehicles 
increase by the day, across the country. At the same time, the Federal 
government has thus far failed to create any kind of framework that 
would address manufacturing standards, operational requirements, or 
workforce impacts of this technology.
 As the Subcommittee is well aware, the singular unique requirement 
placed on autonomous vehicles today is that significant accidents must 
be reported via the National Highway Traffic Safety Administration's 
(NHTSA) Standing General Order 2021-01. Continuing to permit the 
unfettered and unregulated operation of autonomous vehicles presents 
only harm to roadway safety and to the continued existence of the 
millions of jobs directly in, or connected to, commercial driving.
 Action on this front is increasingly overdue, and the Teamsters 
continue to call on Congress and regulators to take action to create a 
binding regulatory framework that prioritizes safety and addresses 
unique conditions and risks presented by autonomous vehicles. 
Specifically, this framework must extend beyond un-benchmarked and 
amorphous fully self-certificated regimes which substitute meaningful 
safety oversight for box-checking exercises.
 We further reject the blanket conclusion that pursuing thoughtful 
regulation on these novel technologies is anathema to innovation and 
note that this position is not borne out by history. As horse-drawn 
carriages gave way to trucks, individual states began passing laws on 
truck safety as early as 1913. By 1935, Congress saw fit to pass the 
Motor Carrier Act, which specifically created authority under the 
Interstate Commerce Commission to ``establish reasonable requirements 
with respect to . . . safety of operation and equipment.'' That 
legislation ultimately paved the way for the Federal safety regime we 
know today, including the development of Federal Motor Vehicle Safey 
Standards (FMVSS), with the first FMVSS adopted in 1967.
 Over nearly 100 years of further technological advancement, 
Congress and regulators have created, amended, and repealed safety 
requirements as necessary to meet the times. However, it is simply 
ahistorical to now claim that technological innovation simply cannot 
exist outside of a laissez-faire regulatory structure. Well-considered 
regulation is a predicate for, not an unjust impediment to, to the safe 
deployment of new technologies. To that end, we are committed to 
working with both this Subcommittee and the full Committee to develop a 
strong Federal framework on commercial autonomous vehicles.
 Lastly, we urge Members to consider the economic impacts of mass 
deployment of unregulated autonomous vehicles on your constituents. The 
single most common occupation for men in the United States without a 
college degree is truck drivers and driver/sales workers.\1\ It is not 
a credible claim to assume that if given the opportunity, employers 
will only seek to automate small segments of the industry when the 
primary motivating factor behind AV deployment is the elimination of 
labor costs.
---------------------------------------------------------------------------
 \1\ https://www.pewresearch.org/short-reads/2024/07/11/among-young-
us-workers-without-a-college-degree-men-and-women-hold-very-different-
types-of-jobs/
---------------------------------------------------------------------------
 Neither are our members, or commercial drivers writ large, swayed 
by promises that the economy will naturally produce equivalent numbers 
of jobs if AV deployment begins to result in displacement, much less 
that any such jobs will be similarly available and/or offer comparable 
levels of compensation and benefits. Congress must not ignore these 
potential impacts as it considers the adoption of AVs.
Technology and Security Threats
 As transportation technologies of all stripes become more advanced 
and more interconnected, security risks also become more abundant. This 
is particularly acute as it relates to trucking and rail where the 
ability of a bad actor or a foreign adversary to access or otherwise 
effect operations could easily prove to be catastrophic.
 The Teamsters thank Senators Moreno and Slotkin for their 
introduction of Connected Vehicle Security Act of 2026, and 
Subcommittee Members Senators Schmitt and Capito for their 
cosponsorship. The legislation would prohibit the import of certain 
vehicles and components manufactured in China, which could potentially 
give the Chinese government or manufacturers access to Americans' data 
or even operational control of their vehicles.
 Similarly, the Teamsters are concerned with ownership and/or 
control of U.S. based manufacturing of transportation equipment by 
foreign adversaries. We continue to strongly oppose efforts by Chinese-
controlled BYD and its poorly camouflaged subsidiary RIDE to re-enter 
into the domestic heavy duty transit bus market. Congress took decisive 
action to prohibit their access to Federal dollars through the 
Transportation Infrastructure Vehicle Security Act, adopted in 2019 as 
part of the National Defense Authorization Act, and these restrictions 
must remain and be strengthened.
 Lastly, we were disturbed at revelations from Waymo during the full 
Committee's February 4, 2026 hearing entitled ``Hit the Road, Mac: The 
Future of Self-Driving Cars'', in which the company revealed that 
remote operators in the Philippines were providing guidance to Waymo 
vehicles operating on American streets. While their technology may make 
such arrangements possible, there should never be a scenario where an 
individual outside the United States is able to provide guidance or 
assert operational controls over vehicles operating within our borders.
AI Applications
 In addition to autonomous vehicles, Teamster members are 
increasingly reporting deployments of AI technologies in our 
workplaces, including in driver/operator monitoring, safety & health 
monitoring, H.R. decision making, automated scheduling, task/route 
assignments and optimization, fleet/operations management, predictive 
maintenance, productivity/quota metrics and others.
 As with all technology, we appreciate that if deployed and 
regulated appropriately AI tools have the potential to improve safety 
and working conditions as well as the possibility of job creation. For 
the purposes of today's hearing, the Teamsters encourage the 
Subcommittee to consider three policy principles.

 1. AI must not be weaponized against working people. The 
 opportunities for the deployment of AI tools in the 
 transportation industry in a manner that is harmful for 
 employees is significant. Surveillance and monitoring tools can 
 present substantial human factors concerns including the 
 effects of micromanagement and constant surveillance on fatigue 
 and stress levels of workers, increased pressure on employees 
 to complete tasks within machine-generated timeframes and 
 performance targets. AI applications that purport to eliminate 
 transportation jobs in their entirety, particularly when no 
 comparable occupation is created by the use of the technology, 
 should be viewed with extreme skepticism.

 2. AI applications in transportation are a supplement, not a 
 replacement. AI applications that combine with the experience 
 of highly skilled professional workers with deep experience in 
 their industries will be the most successful. Many Teamster-
 represented trucking fleets have deployed AI-powered real time 
 route optimization and guidance to drivers, such as UPS' On-
 Road Integrated Optimization and Navigation (ORION). When 
 functioning as an additive tool, these products can assist 
 workers in their decision making. However, when employers 
 instead require blind adherence to AI directives under the 
 threat of discipline, and potentially in contradiction to the 
 decision making of professional transportation employees, the 
 value proposition is greatly diminished.

 3. The most effective applications of AI will be the ones conducted 
 in concert with the impacted workforce. As mentioned above, the 
 utility of AI tools in transportation can be substantially 
 improved when the workforce who will be operating the tools, or 
 be impacted by them, are provided an opportunity to negotiate 
 over their adoption, and participate in dialogue with their 
 employers about their ongoing use and usefulness.
Rail Technology
 Technological advancements in the rail industry present both 
significant opportunities and challenges, which are directly felt by 
the members of the IBT-affiliated BLET and BMWED.
Track Geometry Measurement Systems (TGMS)
 TGMS systems, also known as automated track inspection (ATI) trace 
their roots to the 1970s. Today, some of these systems use a suite of 
technologies including advanced sensors, lasers, and machine vision to 
identify track defects that may not be visible to the human eye. ATI 
detects track geometry defects such as elevation, surface, and gauge 
deviations--a major cause of derailments. These geometry defects can 
sometimes be detected more precisely by ATI than by manual methods. The 
usage of these systems is entirely permissible under Federal Railroad 
Administration's (FRA) existing regulations.
 As a foundational matter, we would like to be extraordinarily clear 
that we support the use of ATI as an essential additive tool to augment 
twice weekly track inspections which have long been required by the 
FRA's regulations. In fact, the BMWED has even previously advocated for 
mandatory deployment of these systems. At its most useful, ATI is a 
supplemental tool that complements visual track inspections carried out 
by humans.
 As they are currently deployed, these systems are only capable of 
identifying 6 of the 23 regulatory defects which must be evaluated 
under 49 CFR Part 213. TGMS are incapable at identifying issues with 
ballast, rail wear, rail joint gaps, tie plate conditions, switch 
components, vegetation, obstructions in the right-of-way, or any 
underlying factor causing the listed defects. Simply put, they are not 
a replacement for human-conducted visual inspections.
 Additionally, like all deployments, the safety case for ATI will 
continue to be made in its actual usage. ATI systems send data to a 
central location, where it is later reviewed. Once the data is analyzed 
and defects are prioritized, a human inspector must still verify the 
defect on-site--potentially delaying repair or remediation for up to 72 
hours. This delay introduces avoidable safety risks. It is also the 
case that identification of defects alone is of little value if 
appropriate maintenance is not being performed expeditiously.
 The persistence of railroad derailments, averaging three reportable 
incidents each day, underscores the need for strong Federal regulations 
for our Nation's railroads to keep our communities safe. To have the 
safest rail system, it is critical that railroads utilize both twice a 
week visual track inspections and automated track inspection (ATI) 
technology to keep our railroad tracks free from defects that can cause 
derailments. As the FRA continues to evaluate the performance of ATI 
deployments, we encourage the FRA to determine if the method by which 
this technology is now being deployed is resulting in improved safety 
outcomes.
 Finally, where these operations are taking place under the terms of 
regulatory waivers, FRA must ensure full compliance with all waiver 
conditions, ensure the validity and accuracy of reported safety data, 
and dispense with waivers where data has not proven safety equivalency.
Locomotive Operations
 Within the last 15 years, new technologies installed in the 
locomotive cab have substantially changed locomotive operations. This 
includes PTC, as well as energy management systems such as Trip 
Optimizer (TO), and increased use and engineer oversight of distributed 
power units (DPUs) in a train consist. Managing these systems has 
become an increasingly significant part of the locomotive engineer's 
job duties.
 In particular, the use of TO, a technology similar to cruise 
control in a passenger vehicle, has become widespread with railroads 
requiring its use as frequently as 95 percent of a trip. This software 
may direct the locomotive engineer or may completely control the 
throttle of all locomotives used by the train, including DPUs. In the 
event an engineer attempts to override the TO beyond a set threshold 
set by management, the worker may now be subject to discipline.
 While we do not oppose the use of TO, the extent of its use means 
that engineers are often spending substantial components of their trip 
making a reduced number of independent decisions on train operations. 
When these systems fail, or unique operational circumstances present 
themselves, an engineer is handed control of the train in difficult 
situations which test their skills with no little to no warning. We are 
concerned that the extensive period of time in which an engineer is 
operating with limited decision making, including but not limited to in 
TO operations, will ultimately result in deskilling of engineers. This 
could prove catastrophic in emergency situations. Mandating minimum 
times spent in manual operations can combat these effects.
 Further, the BLET continues to sound the alarm on the use of remote 
control trains and locomotives (RCLs), which are generally operated 
without an engineer in the cab. Instead, RCLs are operated remotely by 
a rail worker who could be a significant distance away from the train 
and who usually has limited to no visibility of what is in front of the 
locomotive. Even within the yard environment, this creates dangerous 
hazards for other rail workers. Disturbingly, some railroads are now 
running RCL operations through towns and communities on their main 
tracks and rail sidings which invites unacceptable dangers to the 
public and should be prohibited.
Federal Role In Transportation Technology
 Across all modes, including those subject to the Subcommittee and 
full Committee's jurisdiction, the Teamsters Union continues to support 
strong, prescriptive regulations and statutory direction from the 
Department of Transportation and its modal offices. In trucking, the 
need for such standards has never been clearer, as the Department both 
addresses novel technologies like autonomous vehicles and increasingly 
seeks to address long-term scourges in the industry.
 In rail, both the tragedy in East Palestine and conditions in the 
industry leading up to it make a similar case. Equally as important is 
that now the wrong time to go backwards on rail safety regulations by 
embracing ``performance based'' regulations at the FRA. Performance-
based regulations do away with prescriptive requirements in favor of 
outcome targets and allow regulated entities to determine how they will 
demonstrate compliance.
 Despite claims to the contrary, FRA's regulations on key safety 
requirements were not drafted flippantly. They were promulgated in 
response to real safety issues, including those which have had tragic 
consequences for our members and the general public
 Allowing railroads, by virtue of their own in-house metrics, data, 
and reporting to determine if they have accomplished safety outcomes 
will not inspire innovation--it will instead bring unacceptable and 
unchallengeable risks to rail workers and the general public. We 
acknowledge that there are specific applications of performance-based 
rulemaking regimes that work well in differing agency and industry 
structures, but mandates requiring performance-based regulations are 
wrong for the FRA. Performance based regulation only works when the 
results achieved reflect mandated outcomes--this will not be the case 
in this industry. And when they do not, it will be our members who 
suffer.
 Finally, regardless of the content of a regulation, or how 
compliance is accomplished, it is essential that the Department of 
Transportation has the resources to address both ongoing compliance 
with existing regulation and the need to promulgate and enforce new 
regulations. This is particularly salient as these efforts relate to 
the deployment of new transportation technologies as they impact our 
members, the American worker broadly, and the public.
 The International Brotherhood of Teamsters thanks the Subcommittee 
for the opportunity to testify today. We look forward to continuing to 
work together on a bipartisan basis including during the upcoming 
surface transportation reauthorization.

 Senator Young. Thank you, Mr. Scandaglia. Before we dive 
into member questions, I'd like to recognize the Ranking Member 
of this committee, my colleague, Senator Cantwell. Senator 
Cantwell.

 STATEMENT OF HON. MARIA CANTWELL, 
 U.S. SENATOR FROM WASHINGTON

 Senator Cantwell. Thank you, Mr. Chairman. I will be brief. 
I look forward to the questions that our colleagues are asking, 
and I'm going to submit a statement for the record, but I was 
just visited by the City of Bellevue, and they had some very 
interesting technology success using AI related to responding 
to emergencies and law enforcement. And so we'll share that 
with the Committee. And I do think it is something, if we can 
improve on our transportation infrastructure in that way, it's 
something to consider. Thank you, Mr. Chairman.
 [The prepared statement of Senator Cantwell follows:]

Prepared Statement of Hon. Maria Cantwell, U.S. Senator from Washington
 Thank you, Mr. Chairman, for holding this hearing, and thank you to 
our witnesses for your testimony today.
 Safety technology has the potential to help solve the most pressing 
issues across our transportation system--saving lives, time and money.
 Each year, nearly 40,000 people die on our roads. New innovations 
in vehicle technology can enhance driver safety and significantly 
reduce accidents. Just one example--automatic emergency braking in 
heavy-duty trucks could prevent over 19,000 crashes and save more than 
155 lives every year.
 American families lose 63 hours and $269 billion dollars sitting in 
traffic each year. Smart trip-planning technology that integrates GPS, 
weather conditions, and traffic data can help drivers avoid traffic 
jams and spend less time and money on the road.
 And with hundreds of train accidents caused by mechanical failures 
each year, defect detectors are helping alert railroads to issues 
before they become catastrophic, like the Norfolk Southern derailment 
in East Palestine, Ohio.
 In my home state of Washington, communities are piloting smart 
solutions to transportation challenges.
 The City of Bellevue uses smart technology at intersections to give 
first responders priority in real time--ensuring that help reaches 
those in need as fast as possible.
 In Yakima, along one of Washington's deadliest highways, the State 
deployed smart traffic monitoring devices that collect data on the 
conditions that lead to crashes so that engineers can determine the 
most effective safety solutions.
 And at our Canadian border crossing, Washington is using smart 
technology to send real-time updates to travelers on wait times.
 Successful deployment of these kinds of technologies also requires 
protecting the safety, privacy, and confidence of the traveling public. 
Rushed deployment risks undermining public trust in ways that could set 
innovation back rather than move us forward.
 I raised these concerns with the Federal Railroad Administration in 
response to proposals to reduce human track inspections and rely on 
automated inspections. And I also raised these concerns earlier this 
year when this committee held a hearing on autonomous vehicle 
deployment.
 As we work on the next Surface Transportation bill, we must 
prioritize policies that drive the safe deployment of these kinds of 
innovative solutions.
 And if we want to scale these innovations and compete globally, we 
need to invest in innovation projects across the United States.
 That's why I am concerned that this Administration is gutting 
Federal investments that make safety innovations possible in the first 
place.
 President Trump's budget request for Fiscal Year 2027 cuts funding 
for the Department of Transportation by $33.8 billion. It eliminates 
funding for the SMART grant program, cuts freight funding by 36 
percent, and rail funding by 85 percent.
 And it's not just new budget requests. In fact, significant cuts 
have already taken place, including at the agencies charged with 
keeping us safe when we travel.
 Driven by DOGE, the Department of Transportation's Highway Safety 
Office lost 25 percent of its employees. At one point last year, the 
Office of Automation, which is responsible for coordinating the Federal 
government's work on automated vehicles and technologies, had just four 
people.
 A robust Federal effort to modernize our transportation system 
requires a strong Federal workforce. It also requires consistent, 
predictable funding and clear standards to ensure safety and 
transparency in the deployment of these technologies.
 Mr. Chairman, I look forward to working with you and with Ranking 
Member Peters to ensure we don't let innovation get left behind as this 
committee considers the next infrastructure law.
 Thank you.

 Senator Young. Thank you.
 I'll begin with Ms. Chace. Thank you for your testimony, 
Ms. Chace. I appreciate you discussing how our transportation 
system has evolved over time and that we should be treating 
technology as core transportation infrastructure in the United 
States. It's not just the conventional stuff. It's data and all 
the rest of it.
 You mentioned in your written testimony, and I think you 
just alluded to it, that we have a need for Federal leadership 
to scale these technologies, technologies that will reduce 
travel times, lower crash rates, improve asset management on 
our infrastructure projects. What happens if the Federal 
Government doesn't develop national leadership? What signal 
might it send to the private sector? And what happens to our 
globally competitive position, especially as China looks to 
surge ahead in the deployment of some of these critical 
technologies?
 Ms. Chace. Thank you, Senator Young, for the question. It's 
a very important question at this moment in time. So what would 
happen if we don't have Federal leadership is we will continue 
to see fragmented, uneven deployments across the country that 
really struggle to deliver the systemwide benefits that we know 
they can to the American public.
 On the private sector side, right now you have a situation 
where the private sector is actually asking for that unified 
national marketplace. And if we don't create that Federal 
leadership and don't create that national approach, the private 
sector is not going to invest their significant capital into 
our own transportation system.
 If you think about it from a private sector company, it's a 
rational decision to go to a market where you have a unified 
approach and a larger market share. And so the exact outcome 
that we do not want to see happen is, is for our companies that 
are developing technologies right here in America to then go 
deploy those technologies overseas at our global competitors 
because they have a larger marketplace that can be addressed 
there.
 So it's really critical that we ensure that we have Federal 
leadership from Congress and from U.S. DOT that can create, as 
I call it, national approaches to national challenges and show 
those Federal frameworks and approaches and strategies so that 
the private sector sees it's worth it to invest here and that 
there is a long-term ROI and then the public sector similarly 
can have confidence in deploying those technologies.
 Senator Young. Well, thank you. You know, and my reference 
to say China is not just, you know--I'm not trying to get 
people excited, I'm not trying to provoke them, I'm not trying 
to leverage a geopolitical competition into this narrow subset 
of policy. This could impact our rate over time of growth, 
which in turn allows us to fund our way of life, including our 
military. So that is--that's the long game. We need to be using 
this moment in American history to optimize our system at every 
level, including ensuring that our laws and rules allow for the 
integration of the best in class technology so that we can 
outcompete anyone. And that is what I was alluding to.
 Ms. Chace, when we discuss the integration and adoption of 
these technologies, it is important that we contemplate ways to 
secure this infrastructure as well from all kinds of threats. 
And your testimony discusses the tangential benefits of Federal 
leadership in unlocking a scalable marketplace for advanced 
tech in transportation infrastructure sectors. But one of these 
benefits is increased cybersecurity.
 Can you elaborate a bit on how this leadership can build 
stronger cyber safeguards and separately how we can ensure our 
cybersecurity technologies like firewalls or IoT modules in the 
underlying connectivity that powers cloud software tools are 
actually met? In 10 words or less.
 [Laughter.]
 Ms. Chace. Few more than 10. So, Senator, if we're 
establishing leadership right here at home in these 
technologies, then we're actually also developing the most 
innovative cyber tools and security methods right here at home. 
So that Federal leadership is incredibly important in ensuring 
that we secure these technologies, which absolutely, it's a 
priority for our members as well.
 And very quickly right now, what agencies and companies are 
doing to do that and secure these technologies is following the 
existing NIST guidelines, CISA protocols, zero trust 
architecture, secure by design principles, and following all of 
those best in class practices when it comes to cybersecurity. 
But we agree with you, it is incredibly important that we 
create the marketplace for those cyber tools to also be 
developed right here at America.
 Senator Young. Well, by way of follow up after this 
hearing, if you don't have an opportunity to unpack the 
cybersecurity best practices that you just alluded to, and if 
you see a role for Congress in ensuring that we're doing what 
we need to do, please, after this hearing, let me know, let my 
staff know and we'll get to work on it.
 Mr. Peters.
 Senator Peters. Thank you. Thank you, Mr. Chairman.
 Mr. Spear, I know many of us share a commitment to moving 
the ball forward on a framework for autonomous vehicles, 
including autonomous commercial vehicles. So my question for 
you is, do you believe that a legislative AV framework should 
include commercial vehicles? And if so, could you expand on why 
this is important for your members and how the trucking 
industry would certainly benefit from guidance from Congress?
 Mr. Spear. Well, quickly, absolutely. We would welcome 
that. I think inclusion with passenger vehicles is essential, 
but I'd go so far--I'm not competitive, but I would go so far 
to say trucks are business to business, whereas cars are 
business to consumer. If you're buying a car, you're going to 
pick the things that you want on that car. If you don't want 
things that drive technology, you know you're going to come up 
short on that. Businesses to businesses will design systems 
around moving freight more efficiently, more safely, more 
environmentally friendly.
 These are all things that can be developed faster through 
our OEMs, which we only have a half dozen compared to a couple 
dozen auto manufacturers. So, you know, we have a lot more 
ability to put technology platforms in place, move freight more 
efficiently, more safely, move more environmentally friendly. 
So yes, I think having trucks equal with passenger vehicles, if 
not leading this platform, would be more appropriate, in my 
opinion.
 Senator Peters. Very good. Mr. Scandaglia, you represent a 
lot of truck drivers, and as you heard in my opening comments, 
the views of the men and women who are employed in these 
industries are incredibly important to get their viewpoint.
 So I'd like to get your perspective from your members. You 
mentioned in your opening testimony some ideas related to what 
you'd like to see. But for the Committee, I would love to have 
you expand on what you think needs to be done in a national AV 
framework that addresses the concerns that we have of the men 
and women who work in these industries?
 Mr. Scandaglia. Absolutely, appreciate the question. I 
think we're thinking about this in three planks. One is robust 
premarket standards at NHTSA figuring out what has to be on the 
vehicle to make it safe before it hits the road.
 The second piece is substantial oversight tools at Federal 
Motor Carrier Administration to make sure that once there are 
deployments of these vehicles in a meaningful sense, that 
Federal motor carrier has an idea of how they're functioning 
and how they're operating and also has the ability to severably 
take action and enforcement on unsafe autonomous vehicle 
deployments.
 And then in as much as we do see displacement of workers, 
that we develop an approach to address workforce concerns that 
may present themselves down the road, both as that relates to 
workers whose jobs may change. For example, a mechanic who 
works on diesel engine is not going to be prepared to work 
inherently on an autonomous vehicle, at least out of the gate. 
And similarly, if there are to be displacements of drivers, 
what does the future look like for them? I think it's important 
that Congress gets in front of this now and instead of waiting 
until it's too late.
 Senator Peters. Very good. Ms. Chace, I believe there are 
many vehicle technologies in addition to autonomous vehicles 
that certainly have the ability to save lives and as 
regulators, we must do what we can to harness that potential. 
That's why I introduced the Vehicle Safety Research Act with 
Chair Young to codify NHTSA's parts program to accelerate 
advanced driver assistance systems, their research and their 
development.
 It's also why last week I introduced the Vehicle Safety 
Equipment Testing Act with Senator Fischer to speed the testing 
of vehicle safety technology so that they can be perfected and 
deployed quickly. The sooner they're deployed, the more lives 
that are saved. And that's why I also fought to protect auto 
safety spectrum from the deployment of connected vehicle 
technology. And why I and Chair Young have pushed together the 
Department of Transportation to lead the way on the deployment 
of CV2X.
 So if you could give this committee some examples of 
current CV2X deployments and tell the Committee why you believe 
the--what are the biggest barriers to broader deployment of 
these technologies?
 Ms. Chace. Thank you Senator, for the question and for your 
ongoing support. So there are several CVX deployments in the 
country right now that are growing. Atlanta, Georgia has 
actually the largest current deployment in the country, all 
throughout the metro area and extending now to the port of 
Savannah and actually giving freight signal priority, which has 
been very successful. Maricopa County, Arizona has a large 
deployment. Salt Lake City in Utah is coordinating with 
Colorado and Wyoming and Houston, Texas. Those last three are 
all funded by U.S.DOT grants and there are several in your home 
state of Michigan, Ann Arbor and Detroit. I'm actually going to 
be seeing the Detroit deployment this week.
 So some of the examples of what this is providing are: 
transit signal priority, emergency vehicle preemption, freight 
priority and support, pedestrian and cyclist detection and 
alerting for safety, work zone alerting, weather warnings, and 
newer is V2X tolling. And so there's actually a huge range of 
applications that are being leveraged as a part of these 
deployments. We're also seeing some network-based solutions 
being included now in these deployments.
 The biggest barrier I would say is actually consistent 
across all technology areas and is consistent with sort of my 
core message in this testimony, which is that we need to start 
treating technology as a core element of our transportation 
system and infrastructure because that directly ties into 
making sure that Federal transportation funding levels remain 
stable. And that is clearly prioritized, that these 
technologies should be deployed and scaled throughout the 
system.
 So ensuring that we have consistent, dedicated funding for 
these projects, ensuring that we are incorporating technology 
and integrating it into the full lifecycle of projects, those 
are some of the key barriers to both CV2X deployments, but also 
broader technology deployments across the country.
 Senator Peters. Thank you for the answer. Thank you, Mr. 
Chairman.
 Senator Young. Senator Moreno, you're now recognized.

 STATEMENT OF HON. BERNIE MORENO, 
 U.S. SENATOR FROM OHIO

 Senator Moreno. Mr. Spear, let's dig into a little bit of 
what you talked about in your opening statement. How much 
exactly of the things that American consumers buy do they get 
through trucks?
 Mr. Spear. Just over 80 percent of the communities in the 
United States depend on trucks for their day to day needs. So, 
you know, food to fuel, you name it.
 Senator Moreno. So groceries, basic essentials, 
construction goods, you name it, right? It's the entire 
economy.
 Mr. Spear. It's a grocery store shelf issue.
 Senator Moreno. Exactly. And if costs for transportation 
companies rise dramatically, what is the impact on household 
goods?
 Mr. Spear. Well, it definitely translates down no different 
than theft. You know, the price of fuel, inflation, all those 
things get transformed in the prices we pay. And we're the link 
between that from the goods to the fact when they're delivered 
and bought, what you pay is reflected and all those factors. So 
yes, prices definitely go up. We see that. We pass on some of 
those costs, but not all of them and----
 Senator Moreno. But our goal should be to try to make it 
less expensive for transportation to exist in America. Would 
you agree?
 Mr. Spear. Always.
 Senator Moreno. All right. So are you familiar with the 
advanced truck rule that we got rid of last year?
 Mr. Spear. Mm-hmm.
 Senator Moreno. So that would have mandated--on electric 
semis, how many electric semis were sold this year out of the 
total? I will give you the answer. It's 0.2 percent.
 Mr. Spear. Yes. Very small.
 Senator Moreno. But just so that we're clear, because its 
numbers can be confusing, not 2 percent, 0.2 percent. So of all 
the semis sold in the United States this year, 0.2 percent were 
electric. What would the advanced car truck rule have required 
us to have been selling in America had it not been repealed?
 Mr. Spear. Well, it would have transformed us come 2030, 10 
percent a year.
 Senator Moreno. What would be the number? Like, so we were 
0.2 percent. We got rid of the rule. What would the percentage 
required by law have been to have been sold as in terms of 
electric semis?
 Mr. Spear. Well, starting in 2030, 10 percent. It would 
have been about three and a half million trucks.
 Senator Moreno. So a 5,000 percent increase in electric 
vehicles.
 Mr. Spear. Right.
 Senator Moreno. Would that have cost consumers money?
 Mr. Spear. It was three and a half times more than a brand 
new diesel, which by the way, emits, you know, the same amount 
of emissions that, you know, 60 trucks in 1988 emitted. So 
we've come that far. So to push us toward an electric platform 
with infrastructure that doesn't exist would have been 
horrendous in terms of cost and capability.
 Senator Moreno. Is it hyperbolic to say it would have been 
catastrophic for our economy?
 Mr. Spear. It would have imploded our economy.
 Senator Moreno. It would have imploded our economy. There 
wasn't a single solitary Democrat that voted to get rid of that 
rule. I just want to point that out. It's extremely important 
that we remember where we've been so we know where we're going.
 I want to absolutely give props to our Chairman for the 
bill that he has to get rid of the Federal excise tax. Can you 
talk about again a little bit more detail what that means? 
What's the average age of the semi on the road today?
 Mr. Spear. About 2010.
 Senator Moreno. 2010. So 15, 16 year old truck is the 
average. Average.
 Mr. Spear. That's correct.
 Senator Moreno. Not the oldest one, the average.
 Mr. Spear. In California as well.
 Senator Moreno. Right. So if you really want to improve 
fuel economy and safety, you want people driving a newer fleet. 
Is that accurate?
 Mr. Spear. Absolutely. You want to incentivize the 
procurement of brand new equipment. This would do it. This is 
$24,000 per tractor, $6,400 per trailer. This is money that 
should go in the hands of drivers that are operating their own 
equipment to fleets that are replacing their equipment.
 Senator Moreno. But just beyond that it incentivizes people 
to buy newer semis. So if the average age went from 2010 to 
2013 or 2014, you're talking about dramatically better fuel 
economy, dramatically better safety. And this law was one that 
was passed a few years ago. FET was it passed a few years ago? 
It was past 120 years ago?
 Mr. Spear. At the time of the Titanic sinking to fund 
French warfare.
 [Laughter.]
 Mr. Spear. And by the way----
 Senator Moreno. It was temporary, right?
 Mr. Spear.--it's the highest Federal excise tax that we 
have in the government and it's the only one of that grouping 
that funded French warfare that still exists today.
 Senator Moreno. But it was supposed to be a temporary tax.
 Mr. Spear. It's not.
 Senator Moreno. Here we are 120 years later.
 Mr. Spear. It's incentive.
 Senator Moreno. So obviously we need to get Senator Young's 
bill across the finish line and get that done. I think again it 
goes back to the connected--the advanced truck rule. We need to 
lower the cost to transportation companies.
 Mr. Spear. Senator, I point out too beyond safety and 
environmental gains, this is a jobs gain. Those six 
manufacturers that we have far less than the autos or here in 
the United States a little bit in Mexico. This is a union job 
issue right here. This is going to help union jobs.
 Senator Moreno. You must be referring to the fantastic 
factory in Chillicothe, Ohio----
 Mr. Spear. Absolutely.
 Senator Moreno.--brand new Kenworth. So the other one is, 
Ms. Chace, I don't want you to be ignored, Connected Vehicle 
Security Act. It's a bill that Senator Slotkin and I put 
together. I applaud the Ranking Member, Senator Peters who has 
been after this topic for a long time of making certain that we 
don't allow Chinese vehicles into this market. Talk about, from 
your perspective, what could go wrong by having a company 
that's a Chinese defense contractor, BYD, allowed to sell cars 
in the United States that transmit high definition photos, 
videos, and location data back to the Communist party?
 Ms. Chace. Thank you, Senator Moreno for the question. We 
fully agree with your concern and your approach to ensuring 
that Chinese connected vehicles do not come into America. We 
were heavily involved--actually ITS America was heavily 
involved in the Department of Commerce BIS ruling and in 
understanding that we are all aligned in the need for secure 
supply chains also protecting the privacy of Americans and 
ensuring that we have the domestic and allied supply chains to 
do so.
 I think the risk it goes to data privacy and national 
security. And so we have to make sure that we're protecting 
American consumers data, that we're protecting all of our 
National security assets, and that we are ensuring that it's 
American made technology that is in these vehicles that are 
driving on American roadways. Thank you.
 Senator Young. Thank you, Mr. Moreno, and thanks for your 
help on the Federal excise tax repeal. We're going to get that 
done. Thank you, Mr. Spear. Mr. Kim, you're now recognized.

 STATEMENT OF HON. ANDY KIM, 
 U.S. SENATOR FROM NEW JERSEY

 Senator Kim. Thank you, Chairman.
 Mr. Jeffries, I wanted to start with you. I just want to 
make sure I kind of level set here on the numbers I'm seeing in 
terms of just annual concerns that we have about 1,000 to 1,200 
derailments, 1,600 train accidents annually, about 900 to 1,000 
fatalities. Does that kind of mesh with your understanding on 
the safety concerns?
 Mr. Jeffries. So when you talk about specific derailments, 
I think there are--I can't give you the exact numbers. I think 
it was in the mid-900s, 2 years ago. And about 70 percent of 
those occur within yards. So think about, you know, a wheel 
coming off the line. About 20 percent of those occur out on the 
main line, otherwise known kind of the interstate railroad.
 When you think about 1,000 deaths on the railroad, 
approximately 95 percent of those are due to two issues. One is 
trespassers and the other is grade crossing collisions. And 
that's why we work so hard to ensure our employees stay safe. 
And we're proud of the fact that 2025 was the lowest employee 
injury rate in the industry's 199 year history.
 Senator Kim. And I'm glad to see that progress as well.
 Mr. Jeffries. Absolutely.
 Senator Kim. I think we can all agree though, we have more 
work to be done.
 Mr. Jeffries. Of course, always. Until we're at zero.
 Senator Kim. And as you talked about automated track 
inspection, ATI, I think all of us in this room embrace 
technology, want to make sure that we're using everything to be 
able to push on it. I guess I want to get a sense from you, 
just as we're thinking and making decisions here, what are some 
of the limitations of this type of technology in terms of what 
it's not able to identify? Things that we would want to make 
sure we're using other tools, including human inspections.
 Mr. Jeffries. Of course. So let's think about the 
regulation that's on the books right now. It requires a 
periodic naked eye inspections of individuals walking on the 
tracks. After years of pilot and waiver programs by several 
individual railroads who deployed autonomous track inspection 
in lieu of certain manual inspections. So right now I think the 
manual inspections require twice a week the tracks be walked. 
The pilot programs that were in place over several years 
reduced that to once every two weeks because ATI can identify 
up to 200 percent higher defects than the naked eye. And during 
those pilot programs, the safety outcomes were dramatic, a 
significantly higher safety result that occurred.
 And so when you look at what the regulation that's being 
contemplated right now is, reducing visual inspections to once 
per week and letting ATI continuously inspect that track with a 
performance standard that must be met, that is significantly 
more rigorous than what's on the regulations in the book. So 
you're guaranteeing a higher safety outcome. If you don't hit 
that, you have to go back to the old ways of doing things. To 
your point about what----
 Senator Kim. Sorry, I just want to pause you on that one 
because I wanted to get another perspective. Mr. Scandaglia, I 
wanted to turn to you because in your statement here, you're 
saying that some of these systems are only capable identifying 
some, but not all of the types of regulatory defects that we 
can get and pick up through visual inspection. Can you go into 
a little bit more just like what would be missing from just 
doing the tech only or just mostly relying on the tech?
 Mr. Scandaglia. Yes. Current regulations require 
inspections to look at 23 total defect categories. ATI is 
primarily looking at track geometry issues, which encompasses 
about six of those categories. I mean, to Mr. Jeffries' point, 
we're not surprised that ATI used well will increase safety 
again. As I said in my opening statement, we've called for it 
to be mandatory. We think it's a really good tool.
 With that said, given the state of its capabilities at this 
hour, what it can and cannot do, we still believe strongly that 
the best way to deploy this technology is in keeping with the 
currently mandated visual inspection standards.
 Senator Kim. Mr. Jeffries, I mean, what Mr. Scandaglia put 
into his testimony here, that this technology is incapable of 
identifying issues with ballasts, rail wear, rail joint gaps, 
tie plate conditions, switch components, vegetation 
obstructions in the right of way. Is that correct?
 Mr. Jeffries. So one track geometry is an indicator of 
overall track health. And I don't disagree that there are 
things that ATI doesn't detect and that's--you know, for 
example, vegetation growth, et cetera--and that's why we think 
the balance is right to still have once a week individuals 
walking the track looking for those very things.
 And I think we should focus on the outcome: 2025 with the 
lowest number of track related incidents in the industry's 
history. And that's largely due to a broader deployment of new 
technologies that can identify more defects before they become 
problems.
 Senator Kim. I don't disagree that progress is being made. 
But again, like I think all of us here, we want to make sure we 
can look our constituency in the eye and guarantee that safety 
that is there. We're not there yet with what we have, we're not 
there yet with the accommodation of visual inspection as well 
as the technology.
 And I'll be honest with you, I'm uncomfortable with the 
idea that without achieving what we actually want to get to, 
that we would be potentially taking tools off the table at this 
important way. I agree with you, let's let the data decide and 
guide our decisions. I just don't see that data right now just 
yet. And with that, I'll yield back.
 Senator Young. Ms. Lummis, you're now recognized.

 STATEMENT OF HON. CYNTHIA LUMMIS, 
 U.S. SENATOR FROM WYOMING

 Senator Lummis. Thank you, Mr. Chairman, and welcome panel. 
I want to start with Chris Spear. Welcome, Chris. As you know, 
I'm a strong advocate for autonomous vehicles, including the 
Autonomous Vehicle Acceleration Act, because I think it's a 
tool that can help evolve the industry. And I look at it as a 
person who has had--I live in a state where an ambulance driver 
was killed by an illegal trucker who could not read signs.
 We had another incident, multiple casualties, multiple 
deaths in the I-80 tunnel by green River, Wyoming, again caused 
by an illegal who is driving an 18 wheeler. And that was an 
absolutely horrific, deadly fire in a tunnel that killed 
multiple people. So what outdated requirements are holding back 
safe autonomous trucking deployment? And what standards should 
Congress consider to ensure those deployments improve safety, 
strengthen supply chain efficiency, and benefit the trucking 
work force?
 Mr. Spear. I see two things in this. For autonomous 
vehicles, you currently have 26 states that have permissive 
environments for this type of technology. We don't stop at 
State lines. We go from Green river right into Salt Lake. We're 
doing multiple states, every truck, every day. So we need a 
national framework. If you're going to invest in this 
technology, grow it nationally, not by State, or we're 
conceding this to China, they will take this technology, they 
will run with it, and then we will be reacting to that 
platform. It's that simple.
 That's a performance-based approach. It's about innovation. 
It's about technology solving solutions. You want a 
prescriptive environment, you know, compared to phones. If we 
had that in place right now, we'd still be working on 
blackberries. OK? Everybody else around the world would have an 
iPhone or a Droid. So you've got to have a performance based 
metric, not a prescriptive. And that's going to allow the 
agencies to work with tech solutions that are going to 
constantly evolve year over year and make certain that this 
platform is sound.
 The second piece of it that you mention on the illegal 
driver, look at the SAFER Act that Chairman Young has. It is 
enabling the FMCSA at DOT to do the right things in going after 
these criminals who shouldn't be on the road in the first 
place. A lot of these companies are chameleon carriers. They're 
bad actors. They get busted, they drop off the registry and 
they reregister in another name.
 So they replaced this last month with a system called 
Motus. Motus has taken a little time to get up and running, but 
when it does, it is going to rid a lot of the bad actors that 
we're seeing. English language proficiency, testing. These are 
done in all states to have a baseline standard in every state 
to make sure that when you get a CDL, you have met the minimum, 
minimum criteria, which should be several weeks of training, 
not two days over the Internet.
 So I applaud what they're doing. I want to see it made 
permanent. So I love the bill that you have. I think that'll 
solve that problem in kind.
 Senator Lummis. Well, thank you for that, Mr. Young. And 
Ms. Chace, I want to ask you some questions about digital twins 
and permitting reform. It looks like digital twins already 
exist, am I correct?
 Ms. Chace. Yes.
 Senator Lummis. So what is preventing the broader adoption 
across Federal infrastructure reviews and permitting processes? 
And what should Congress do to ensure agencies are able to 
review digital twins to deliver projects faster, cheaper?
 Ms. Chace. Thank you, Senator, for the question. So you're 
really referencing this generational shift from paper plans and 
paper--the use of 2D plans to 3D digital twins and digital 
documents. So Congress could do a couple of things in this 
instance.
 Congress should encourage the use of digital technologies 
to support project delivery. This can be through explicit 
eligibility criteria on grants or formula funding programs 
through guidance from USDOT. The ADCMS grant program is a great 
initiative in this area that has really incentivized digital 
delivery. And to your point, we should encourage recipients of 
DOT funds to utilize digital platforms when carrying out 
environmental reviews.
 In other words, we have to be able to submit those review 
documents digitally and for the agencies to accept them 
digitally. Ultimately, what we would believe Congress can do is 
consistent with my testimony in a whole, which is treating 
technology as a core element of transportation across all of 
the various life cycles of technology: project delivery, 
construction, operations, maintenance, is critical to ensuring 
that we actually aid this digital transformation in a 
comprehensive way.
 Senator Lummis. Thank you. Mr. Chairman, permission to ask 
one more.
 Senator Young. Please proceed.
 Senator Lummis. Thank you. Mr. Jeffries, can you explain 
how mandates like the two-man crew requirement or more strict 
high hazard train definitions could affect the movement of, 
say, Wyoming coal or other American energy products by rail?
 Mr. Jeffries. Sure. So I think it leads to a bigger 
question about locking in current operating requirements 
without any evidence to prove that those requirements result in 
a higher safety outcome. Because that's what we should be 
focused on, safety outcomes, period. And when you lock in 
current ways of doing things or you add new requirements that 
cannot be justified, the result is you undermine the ability 
for the network to remain fluid, you reduce service, you 
increase congestion, all without a positive safety outcome.
 And so if we can't draw a direct line to a positive safety 
outcome, we shouldn't be doing things. And I think that's why 
so many different groups outside of railroads, such as the coal 
industry, such as the Ag industry, have expressed serious 
concerns about some of these proposals.
 Senator Lummis. Thank you, Mr. Chairman.
 Senator Young. Well, thank you, Senator Lummis. Mr. Lujan, 
you're now recognized.

 STATEMENT OF HON. BEN RAY LUJAN, 
 U.S. SENATOR FROM NEW MEXICO

 Senator Lujan. Thank you, Mr. Chairman. Mr. Jeffries, would 
you find it acceptable if 10,000 lives were lost per year in 
America on trains with train crashes?
 Mr. Jeffries. Absolutely not.
 Senator Lujan. Mr. Spear?
 Mr. Spear. Absolutely not.
 Senator Lujan. Ms. Chace?
 Ms. Chace. No, Senator.
 Senator Lujan. Mr. Scandaglia?
 Mr. Scandaglia. No, Senator.
 Senator Lujan. Mr. Jeffries, would you find it acceptable 
if 10,000 lives were lost in America on airline crashes a year?
 Mr. Jeffries. Absolutely not.
 Senator Lujan. Mr. Spear?
 Mr. Spear. Definitely not.
 Senator Lujan. Ms. Chace?
 Ms. Chace. No.
 Senator Lujan. Mr. Scandaglia?
 Mr. Scandaglia. We would not.
 Senator Lujan. Mr. Jeffries, do you find it acceptable that 
in America we lose 10,000 lives a year with car crashes based 
on DWI?
 Mr. Jeffries. Absolutely not.
 Senator Lujan. Mr. Spear?
 Mr. Spear. No.
 Senator Lujan. Ms. Chace?
 Ms. Chace. No.
 Senator Lujan. Mr. Scandaglia?
 Mr. Scandaglia. No.
 Senator Lujan. Look, I know NHTSA's not here today. 
Department of Transportation is not here today. We're here to 
talk about technology and vehicles. You all support 
technological advances in modes of transportation. Mr. 
Jeffries?
 Mr. Jeffries. Yes, indeed.
 Senator Lujan. Mr. Spear?
 Mr. Spear. Absolutely.
 Senator Lujan. Ms. Chace.
 Ms. Chace. Yes, I do.
 Senator Lujan. Mr. Scandaglia?
 Mr. Scandaglia. Yes.
 Senator Lujan. One of my colleagues was just talking about 
autonomous vehicles. That takes technology. There are 
investments, there are companies that hold patents, there are 
tier one suppliers in the automotive space that hold patents in 
this area. The market's working because there are signals to 
the market to say make investments in this space.
 Now, I also agree with one of my colleagues who's here 
today, when there's sunk in costs and there's still technology 
out there that's not doing a damn thing. And there's one 
technology, when it comes to preventing drunk driving car 
crashes, that's gotten appropriations from Congress, has gotten 
millions and millions of dollars from the auto industry, and 
they're still operating out a little garage somewhere in 
Virginia, if I'm not mistaken. And they've not come up with a 
solution.
 Now, all my colleagues don't agree with me when I say we 
should stop drunk driving deaths and impart impaired crashes in 
America. We have autonomous vehicles. There are self-driving 
taxis. Now, there are all kinds of incredible tools that are 
out there. And these--I've been in cars that do this. In 
Europe, there are cars being sold to those consumers that 
already say, hey, if there are some impaired problems on here, 
we're going to warn you, we're going to slow you down. If you 
have a heart attack, you have a stroke, we're not going to let 
you kill someone else.
 You know, every one of us has a phone in our pockets, or 
most of us do, that also has GPS in it and whatnot. Tells you 
which way you're going, which way you shouldn't go. When I'm on 
my mountain bike, my phone tells me if I start going down a 
wrong trail that I shouldn't be going down. I don't understand 
why this is so hard for vehicles. My colleagues know in the 
early 1990s, I was hit head on by a drunk driver less than half 
a mile from my house and I walked away from the damn thing. Not 
all my constituents can say that.
 I've been to a lot of funerals and I think other colleagues 
have been as well. It might make things a little more expensive 
to purchase a vehicle, but what happens if there's technology 
in a car that saves your kid, saves your mom or dad, saves your 
brother or sister? We can do that in America today.
 And look, I get this hearing there's no one here on the 
panel with cars and car safety or from NHTSA or from the 
Department of Transportation. We've had witness after witness 
from the Department of Transportation, from NHTSA here saying, 
no, we're going to do something, we're going to do something. 
They just issued a report that said, oh, the technology is not 
ready.
 If there were 10,000 Americans dying on an airplane every 
year, you bet your life that they would come up with technology 
to save them. If it was happening on trains, you know, that 
they would move mountains to save lives. But if you or I get 
killed on a paved road because we're driving a car, I guess we 
really don't matter. And I'm just beside myself that one of my 
colleagues out of Texas in the House of Representatives just 
passed an amendment that said his constituents, he really 
doesn't give a shit about them if they get killed because 
someone's been drinking or they're impaired on the damn roads 
in Texas.
 Well, in New Mexico, we care about people and I certainly 
hope that we can find a way to get this done. If my colleagues 
have one objection or another, let's talk about it. This isn't 
about privacy, you know, a bunch of folks out there saying 
they're going to steal privacy from you. Well, what about the 
autonomous cars? What about the airplanes? What about the 
rails? That's not what this is about.
 Let's find a way in America where we can drive innovation 
and save people's lives. I don't know why this is so hard. I'm 
beside myself this morning as we come together and I just 
recently read that report. Democrat, Republican, no matter, 
man. My libertarian friends, to all the smart staff that are in 
this room, let's find a way to do something, man. Let's save 
some people. I worked on this with Rick Scott. Rick's not a 
liberal. You know, there's a way to work together, y'all.
 Let's find a way to do that so that if someone gets behind 
a wheel that shouldn't be, that there's a way to keep them 
alive for their loved ones and anyone that they might meet on 
the drive to wherever they're headed. And I certainly hope we 
can do that, Mr. Chairman. I'm open to ideas. I want to thank 
the Mothers Against Drunk Driving who have led this effort 
across America and every survivor of a drunk crash and an 
impaired crash that has been willing to come and lend their 
voices. Mrs. Dole as well, I want to thank her for the work 
that she's been doing with MADD and everyone else.
 So I hope to God that we can find a way past differences 
and whoever the next administration is, because this one's not 
going to do it. The Biden administration didn't get it across 
the finish line. Whoever the next administration is, let's find 
a way to bring everyone together and save more people lives. I 
appreciate the time today, Mr. Chairman. Thank you.
 Senator Young. Thank you, Mr. Lujan.
 Mr. Spear, thank you for your words throughout this hearing 
in support of and for your collaboration on the repeal of the 
Federal excise tax by legislation, the Modern Clean and Safe 
Trucks Act. I think this legislation is notable in this hearing 
because the subtitle of this hearing is ``How Technological 
Advances are Driving Transportation Innovation.''
 I'd like you to unpack for those who are watching this 
hearing, how passing this legislation could actually better 
incentivize investments in the most technologically advanced 
vehicles?
 Mr. Spear. I think the FET repeal is a no brainer. Fact is 
it's going to put the newest, latest, greatest technology on 
the roads. It's going to replace those 2010s that Senator 
Moreno talked about. And you know, the California rules that 
were going to electrify us if they just focused on getting the 
2010 or older trucks off the roads in California, they would 
have exponentially reduced emissions. They could have done that 
right now without turning on electricity, which they don't 
have, and turning our industry into an electric freight mover.
 So this was something that we pointed out year over year. 
The FET repeal is good for safety, it's good for environments, 
good for union jobs. There's something in this for everybody. 
Candidly, I think putting money in our industry's pockets, 
$24,000 per truck, $6,400 per trailer. That's money that can be 
invested in other things. Driver pay, training. But beyond 
that, putting that newer equipment out there is good for 
everybody.
 Senator Young. For innovation, right? The newest equipment.
 Mr. Spear. 100 percent.
 Senator Young. Right. The newest equipment with the latest 
safety upgrades, with the latest performance upgrades, 
efficiency tools, on and on. So thank you for your help on 
that.
 I'm going to turn to Mr. Jeffries. Mr. Jeffries, you 
alluded earlier to challenges with deployment of latest 
technologies in the rail sector. How should performance-based 
regulations look across a multitude of different technologies?
 Mr. Jeffries. Well, thank you for the question. So, you 
know, I think all of this talk of innovation and automation is 
fantastic. Autonomous trucks, autonomous cars, we operate on a 
regulatory structure that was developed in the early 1970s and 
very prescriptive, very manual based. And like every other 
industry out there, we have advanced dramatically when it comes 
to technological deployment, innovative new tools, et cetera, 
that have excellent advanced safety outcomes, service outcomes, 
efficiency outcomes.
 And other agencies in the DOT have embraced performance-
based regulations, whether it's FAA, whether it's FHWA, whether 
it's FTA. The FRA for some reason has not, you know, really 
come around to that concept. And when we're talking about 
automation, when we're talking about autonomous trucks, when 
we're reading articles about driverless trucks delivering Dr. 
Pepper and Pepsi to stores in Texas today and operating out on 
the interstates, which by the way, I do not begrudge at all. I 
think it's fantastic. I just think we should be operating on a 
mode neutral tech policy that drives outcomes versus inputs. So 
tell me where you want us to be. Tell me the outcome we need to 
achieve and let us find the best path there.
 Senator Young. Can I stop you there?
 Mr. Jeffries. Yes.
 Senator Young. I think all of our witnesses were listening 
to your last statement. Let's focus on outcomes, not on 
process. Mr. Spear, do you agree----
 Mr. Spear. Absolutely.
 Senator Young.--with that approach?
 Mr. Spear. You need a performance-based system. This is a 
technology hearing.
 Senator Young. Yes.
 Mr. Spear. Let's breed it, let's let it unbridle and not 
prescribe everything.
 Senator Young. Ms. Chace, do you agree with that approach?
 Ms. Chace. Absolutely agree.
 Senator Young. OK. Mr. Scandaglia, do you agree with that 
approach?
 Mr. Scandaglia. Not inherently, no.
 Senator Young. And why is that?
 Mr. Scandaglia. When we're talking about performance-based 
standards, part of the consideration of that conversation is 
will the method of compliance result in the outcome that we 
have prescribed. And frankly, if you speak to our members who 
do you----
 Senator Young. But if you judge based on outcomes, 
especially over time, wouldn't that address that concern? You 
might have some high profile and politically resonant, I would 
add, examples of suboptimal outcomes along the way, even those 
involving safety. But over time, if you're improving more 
lives, if you're saving more lives, isn't that how you would 
measure success of a regime or not? Is that utilitarian sort of 
approach not one that we should be adopting?
 Mr. Scandaglia. I think if we're talking broadly in the 
concept of saving lives, I think that's obviously something we 
all support. But when we're starting to talk more specifically 
about the outcome of a specific regulation, we talked about 
automated track inspection. Part of our concern inherently here 
too is when we move--if we move entirely to a performance based 
system, we're also then relying on the information and data 
that is provided by the regulated entity. And to speak 
candidly, my members don't trust it.
 Senator Young. Give me an example, a bad information that 
the regulated entity is operating under. Because I thought this 
is how we have to judge under the current regime regardless, in 
the absence of outcome-based performance measurement.
 Mr. Scandaglia. The concern is not--the concern actually is 
not specific to either performance based or existing regimes. I 
think when we are looking at the way that industry has provided 
data to regulators and the characterizations that can be made 
as the result of that data, frequently that does not align with 
our members experience on the job.
 I would offer to any member of this committee, if you would 
like to go out and meet, say the railroaders that I represent--
--
 Senator Young. Yes.
 Mr. Scandaglia.--if ask them about do they agree that we 
are in an era of unprecedented safety, they will tell you no to 
the man or woman. And I make that offer to any Senator who'd 
like to do that, I would invite them to do so.
 Senator Young. I think that's data too. That should be--
that should of course be part of what we are balancing and 
perhaps we capture that data. But in the end then it becomes a 
debate over what outcomes you're looking at. If your sole 
outcome is your membership, which you know, our perspectives 
are shaped by where we sit, so maybe yours is. But I think 
societally most Americans would say we should look at a broader 
array of data rather than just member feedback.
 Mr. Scandaglia. I don't think we would disagree there 
either.
 Senator Young. Right, OK. Thank you for indulging me, 
everyone on that. Senator Cruz is recognized for questions.

 STATEMENT OF HON. TED CRUZ, 
 U.S. SENATOR FROM TEXAS

 Senator Cruz. Thank you, Mr. Chairman, and thank you for 
holding this hearing. Mr. Spear, let's start with you.
 Mr. Spear, you said that the integration of AV trucks will 
mean, ``an evolution, not an elimination of the job.'' I 
suspect that many people will find that statement surprising or 
even contradictory since they assume that an AV truck wouldn't 
have a driver sitting in it. Mr. Spear, can you please explain 
what you mean when you say AV trucks will bring an evolution, 
not an elimination of the trucker?
 Mr. Spear. Well, I don't think it's a generality. We look 
at things from a number of perspectives. First and foremost, 
from an economic viewpoint, we're moving 11.4 billion tons a 
year. That's 73 percent of everything that's moved in freight 
is moved by truck. So everything you drink, I drink, eat, wear, 
came off a truck. Mom, dad, husband, wife, they made that 
happen.
 Over the next 10 years, just to keep pace with current 
economic growth in this country, we've got to move another 2.7 
billion tons of freight. I need more drivers, I need more 
trucks, and I need innovation. I need all of it. And running 
autonomous vehicles, levels 1 through 4, which still require a 
driver, make drivers smarter, make technicians smarter, they're 
all going to benefit from this.
 You'll probably see some Level 5, from Texas to Southern 
California. It may not be ready for prime time yet, but in 
addition to more drivers, more technicians, more inspectors, 
dispatchers, trainers, we're going to hire more people with 
this technology just to keep pace with current economic growth. 
So I look at this as a win-win all across the board.
 Senator Cruz. Mr. Scandaglia, what do the Teamsters think 
about AV trucks?
 Mr. Scandaglia. [Off mic.]
 Senator Cruz. It is.
 Mr. Scandaglia. I would like to kind of jump off where Mr. 
Spear left off, which is, I don't think we disagree with the 
notion that we are not going to see an influx of driverless 
trucks in every fleet across America tomorrow. We're not going 
to see hundreds of thousands of people lose their job next 
week. I think anyone who has been rational about that can 
agree.
 Where I think we disagree somewhat is if this technology 
does hit the prime time, whatever point that may be, we are 
concerned that we're not going to talk about, well, we're just 
going to automate for whatever the delta of the purported 
driver shortage might be, or we're just going to automate in 
this nice strip of road through your home state.
 I think it is ahistoric to suggest that employers at some 
point in time will have the ability to eliminate their labor 
cost in totality or in large part, and decide not to do it. 
That's what concerns my members.
 Senator Cruz. I very much hope this committee will move a 
surface transportation bill this year. We are hard at work on 
it, and one of the important elements of that bill, I hope, 
will be an AV title. I think AV is probably the most important 
automotive and trucking innovation that we are facing.
 We had initially discussed focusing that AV title on 
automobiles rather than trucks. I have since been told that the 
Teamsters have expressed a pretty strong desire that trucks be 
included in any AV title. Is that right? And if so, can you 
articulate your views?
 Mr. Scandaglia. Yes, that's absolutely correct. I think at 
one point in time, when this kind of all seemed like a magical 
fairy tale, we were uninterested in the conversation. I don't 
think that's a conversation we can rationally have today. There 
are numerous testing and deployments we have in revenue service 
on automated companies, automated trucks. So I think the time 
to continue to pretend like this isn't going to happen has 
passed us on.
 But with that said, continuing to exist in an environment, 
as I said earlier, where we have created no unique Federal 
requirements other than you tell NHTSA when you get in a 
certain kind of crash is inappropriate. So we are very much 
committed to including AV trucks in that conversation. We want 
that to be a predicate for this bill, and we're very committed 
to working with the Committee to get that done.
 Senator Cruz. Good. Well, we will look forward to working 
with you closely on that and to trying to reach a resolution 
that hopefully incorporates the views of stakeholders across 
the spectrum.
 Mr. Scandaglia. Thank you.
 Senator Cruz. Let's turn to a second topic, which is 
freight fraud and chameleon carriers. This committee's taken 
testimony on the scourge of freight fraud and is prepared to 
legislate to address it. I want to thank Senator Young for his 
leadership on the Safer Transport Act, which is going to help 
stop freight fraud if enacted.
 Chameleon characters, meaning carriers with poor safety 
records that go out of business and then reincarnate as new 
carriers with clean records, are particularly problematic for 
fraudulent activities and poor safety records. Mr. Spear and 
Mr. Scandaglia, can you elaborate on the chameleon carrier 
problem and what Congress should do to address it? Mr. Spear.
 Mr. Spear. I think Chairman Young of this subcommittee has 
a bill called the SAFER Act that would enable FMCSA at DOT the 
tools regardless of administration, they would be focused on 
cleaning up their registry, which is the breeding ground for 
chameleon carriers. They shouldn't get busted, go under, and 
then repost under a new number. We're enforcing the law on the 
same people over and over. We need to get them out of the 
industry. These are bad people.
 I think also beyond that, fraud detection in your bill is 
really outstanding. This is a DOT specific issue that I think 
would add a lot of certainty within our industry with the 
agency overseeing us. I'd like to make it permanent. I don't 
want it to just be another two, two and a half years. I want 
this--this is exactly what the agency should be doing. I'm glad 
to see it being done now and I'm glad to see you putting forth 
legislation that would make that permanent. And beyond that, I 
think the Combating Organized Retail Crime Act, I really want 
to share my appreciation for the heavy bipartisan support in 
the Senate, but in the House, this passed the House Judiciary 
Committee unanimously. Nothing goes through that committee 
unanimously. It went off the House floor with 145 Democrats.
 This is going to bring the Federal Government, DHS, DOJ, 
DOT to the table where states, localities, and our industry do 
not have the ability to go after transnational organizations 
from Eastern Europe, Russia, other parts of the world. This is 
$18 million a day, costing my industry $6.6 billion a year. I 
applaud you all for taking this bill up. It's sitting in the 
Senate right now and the President's waiting to sign it. This 
could be done very quickly and would bring the Federal 
Government to the table. We can combat this.
 Senator Cruz. Good. That's helpful. Mr. Scandaglia.
 Mr. Scandaglia. Yes. I largely associate myself with Mr. 
Spear's comments. We've had this problem for decades and 
decades and I think, unfortunately have just continued to throw 
our hands up in the air and say it's hard and it's complicated 
and not made progress. I also agree that we have a small number 
of fleets and operators who are contributing to a large 
percentage of this problem.
 And so we're encouraged by efforts to finally deal with 
this. Both efforts that the DOT is taking. We appreciate 
consideration in safer transport for using new technology tools 
at Federal Motor Carrier to assess their datasets to look for 
patterns that are not currently being found. So we're all in, 
in this regard. I think it's a very important initiative.
 Senator Cruz. Great. Thank you.
 Senator Young. Senator Moreno, you're recognized for your 
second tranche of questions.
 Senator Moreno. Thank you. Ms. Chace, you talked about the 
importance of making certain that we don't have Chinese 
automobiles in the market from a national security perspective.
 Mr. Spear, from your perspective, from the Trucking 
Association's perspective, how important is it to make certain 
that we get that clear before we start talking about autonomous 
vehicles, because obviously that would leave a gaping hole? I 
think most Americans would be probably--I think it's a 
conspiracy theory, to think that manufacturers can remote 
access vehicles and take control of them. And, of course, 
having Chinese Communist Party defense contractors allowed to 
sell cars in the U.S.
 Can you talk about, just expand from what Ms. Chace said 
about the importance of national security?
 Mr. Spear. Happy to. I'd also dial back to past experiences 
of working in a tech manufacturer, Global Tech Manufacturing. 
We had an 80:20 rule at that time where you invest in China, 
you'll put 80 percent, but you always hold 20 back, because in 
6 to 12 months, they're a half mile down the road taking your 
technology and replicating it. They're that good, they're that 
fast.
 So, yes, our conceding on a lot of these things hands the 
baton to China to take control of it. So we look at our 
industry a little bit different than passenger vehicles. Having 
our roughly half dozen manufacturers in the U.S., Mexico, we 
have better controls, I believe, about what's in a vehicle. 
They're not selling trucks in the U.S. but we do have Chinese 
parts in trucks. I think in working with BIS at Commerce 
Department, we were able to separate it from passenger vehicles 
and look at our trucks.
 As to what was a safety security concern, I think it's a 
bit less than cars. But I'm 100 percent wedded to what you're 
trying to do. My team's been working with yours, and I think 
there are some steps forward where we can get that rulemaking 
done at BIS and accomplish exactly what your bill proposes.
 Senator Moreno. Yes, exactly. So, again, the point being 
that let's make certain we solve the Chinese threat before we 
start thinking about autonomous vehicles, because if we did one 
before the other, you could have a huge problem. So obviously, 
we understand the national security threat. We talked about 
that.
 Mr. Scandaglia, I think you and your president wake up 
every day thinking about working Americans, making certain that 
you can have a mom or a dad, have one job where they can 
provide for their family. And that's where I think there should 
be commonality between Republicans and Democrats, that that 
should be our goal. How do we build and strengthen our working 
class in this country?
 So two points for you. Expand kind of what we're talking 
about. So we understand the national security threat. What's 
the economic threat to having Chinese automobiles in the United 
States from your perspective?
 Mr. Scandaglia. So one of the substantial threats that we 
see is safety for the actual operating workforce. We were 
extremely disturbed when the Committee held a hearing on 
autonomous vehicles in February when the witness from Waymo 
suggested that they had individuals located in the Philippines 
capable of manipulating those vehicles on our roads. That's 
really horrifying.
 The idea that you could have a driver in say a level 4 
automated truck and someone in China could press a button and 
make that truck take a turn or accelerate is really horrifying 
to our membership and puts our members at risk.
 The other thing I would mention too is not so much about 
Chinese vehicles themselves being imported, but about Chinese 
companies setting up shop in America and then receiving the 
benefit of Federal transportation dollars. We're very proud to 
represent the employees of Gillig who have manufactured heavy 
duty transit buses in Lancaster, California. They continue to 
be under an existential threat from BYD who came to this 
country, opened up manufacturing facilities while being 
entirely funded by the Chinese government and supported by the 
Chinese government.
 We can't compete that way. And it would be a really 
horrible solution or horrible answer if our members and the 
company we represent was driven out of business by a Chinese 
owned company that's uninterested, at least for the time being, 
in whether or not they make a profit but wants to dominate a 
domestic market.
 Senator Moreno. Yes. And obviously the auto industry, take 
that exact analysis that you just gave, multiply it by 100, 
right. Ford, General Motors can compete with any company on 
earth, but they can't compete with a country. And so when you 
come into a market in a predatory way, in a way that these cars 
are dramatically less expensive, not because they're more 
innovative, but they're willing to lose hundreds of billions of 
dollars to basically destroy the western auto world, that we 
would have to be decently dumb to allow that to happen, right?
 Mr. Scandaglia. I would agree.
 Senator Moreno. All right, so we shouldn't be decently 
dumb.
 So the last question I have for you, Mr. Scandaglia, is we 
talked about some of the framework that we're trying to do. 
Talk about what it means to your members to have to share the 
road with others who are here illegally, who don't speak the 
language, who don't have to go through the rigor that your 
members do. What does that do for them on a day to day basis, 
having to be vigilant, not knowing who's in these other trucks?
 Mr. Scandaglia. Yes, there's certainly vigilance on the 
road, regardless of why someone specifically is unqualified. 
But potentially in those circumstances, our members, their 
workplace are the roads. So having someone who's sharing that 
road with them, who should not be, is concerning on a day to 
day safety perspective.
 The other thing that is equally worth mentioning though is 
whether or not those jobs exist. We're competing against 
people, competing against companies who are operating through 
low road systems, through having drivers who are not trained, 
who are not here lawfully. It presents a safety concern and 
presents a competition concern that relates to whether our jobs 
even continue to exist.
 Senator Moreno. Right. And the main job of government 
should be to make certain that something like that doesn't 
happen. Would you agree?
 Mr. Scandaglia. Absolutely.
 Senator Moreno. And Mr. Chairman, given what Indiana did to 
Ohio State, do you mind if I ask one more question?
 [Laughter.]
 Senator Young. Given that, yes. Go ahead, please.
 Senator Moreno. Perfect. All of a sudden Indiana is a 
football town. Who knows?
 Senator Young. I'm concerned that this will be a precedent, 
right. This will continue, I think, but.
 Senator Moreno. Well, that probably won't the football yet.
 Senator Young. Yes, no.
 Senator Moreno. Mr. Spear, one of the things that we 
haven't talked about, which I think is critical. So we talked 
about how reversing the advanced truck rule saved the trucking 
industry an apocalyptic scenario from our economy. We talked 
about the importance of jobs, we talked the importance of 
banning Chinese vehicles.
 But there's another threat to your industry which is 
completely out of control litigation. I think it's important to 
just give you some time to talk about that and what that means 
to your members and the companies.
 Mr. Spear. Yes, I think indifferent to this hearing, which 
has got a really good bipartisan tone, a lot of bipartisan 
legislation. Very good thought put into these proposals. 
California Air Resources Board does not sit down with our 
industry. They don't care what our industry has to say. Their 
attitude is, you'll figure it out. So if you're going to 
electrify our industry in a matter of five years with no 
infrastructure, no power, and I don't care where it comes from, 
could be coal, nuclear, could be wind, solar, hydro, maybe a 
combination, all of them. But this is a state that already 
suffers from rolling blackouts.
 So to say you're going to have the power to go through it. 
If you had the infrastructure, which you don't, you don't have 
the minerals. They're coming from China and the Congo. We have 
them here, but it would take 10 years to get to them. 
Environmentalists won't let us do that either. The cost parity, 
3.5 times more than a diesel truck, which emits 98.5 percent 
less than a diesel truck did in 1988. One truck today is so 
efficient compared to all the trucks. 60, you know, trucks 
today on the road, brand new diesels emit what one truck 
emitted in 1988. That's how far we've come. They didn't take 
that into account.
 Senator Young. Thank you, Cummins engines.
 Mr. Spear. They're fantastic. I've been to that plant, it's 
fantastic. And then you look at the operational parity. It 
takes 15 minutes to fill a diesel to go 1,200 miles. It takes 
six to eight hours to charge an electric truck to go 200 miles. 
So we're going to need more drivers, more trucks. It's just 
colossal. It was one of the dumbest ideas I have ever seen put 
forward by anyone, including California, which I refer to as 
the breeding ground of all bad public policy. I mean, they just 
don't think things through. They don't care.
 Senator Young. So, thank you. Thank you. On that note, 
because it has been, I think, a constructive and thoughtful 
exchange from all of our witnesses. Thank you so much. And our 
members, we've learned a lot this hearing. So before we wrap 
up, I want to ask unanimous consent to enter into the record a 
letter from the Autonomous Vehicle Industry Association and the 
Intermodal Association of North America. Without objection, so 
ordered.
 [The information referred to follows:]

 Autonomous Vehicle Industry Association
 June 8, 2026

Chairman Todd Young
Committee on Commerce, Science, and Transportation
Subcommittee on Surface Transportation, Freight, Pipelines, and Safety
United States Senate

Ranking Member Gary Peters
Committee on Commerce, Science, and Transportation
Subcommittee on Surface Transportation, Freight, Pipelines, and Safety
United States Senate

Re: Autonomous Vehicle Industry Association Statement for the Record on 
 Subcommittee Hearing on ``The Need for Speed: How 
 Technological Advances are Driving Transportation 
 Innovation.''

Dear Chairman Young and Ranking Member Peters,

 The Autonomous Vehicle Industry Association (``AVIA'') is pleased 
to submit this statement for the record regarding the Subcommittee's 
hearing, ``The Need for Speed: How Technological Advances are Driving 
Transportation Innovation.'' AVIA thanks the Subcommittee for holding 
this hearing and for its continued focus on how emerging technology can 
improve safety, expand mobility, and strengthen American economic 
competitiveness. These are precisely the questions that Federal 
autonomous vehicle (``AV'') policy must answer, and AVIA welcomes the 
opportunity to offer our perspective.
 AVIA is the unified voice of the diverse companies advancing safe 
and trusted autonomous vehicles.\1\ Our membership is comprised of the 
world's leading technology, automotive, ridesharing, trucking, and 
transportation companies. Vehicles operated by AVIA members have driven 
more than 360 million autonomous miles on U.S. public roads, providing 
passenger and freight transportation services in states as diverse as 
Arizona, California, Florida, Georgia, Michigan, Nevada, Pennsylvania, 
and Texas.\2\ AVs play a critical role in addressing some of the most 
persistent challenges facing our nation: the unacceptable toll of 
traffic fatalities, the barriers to mobility faced by millions of 
Americans, supply chain inefficiencies, and the need to maintain U.S. 
technological and economic leadership in a competitive global 
environment.
---------------------------------------------------------------------------
 \1\ AVIA members include Amazon, Aurora, AVRS, Avride, Bot Auto, 
Discount Tire, DoorDash, Ford, Gatik, General Motors, Honda, 
International, Kodiak, Lockton, Lyft, Motional, MOIA, NGV, Nuro, Plus, 
Stack, Rivian, Tier IV, Torc Robotics, TaskUs, Terawatt, Uber, UPS, 
U.S. Venture, Valgo, Volvo Cars, Volvo Autonomous Solutions, Waabi, 
Waymo, and Zoox. See Our Mission and Members, Autonomous Vehicle Indus. 
Ass'n, https://theavindustry.org/ (2026).
 \2\ AVIA's State of AV Report (2026) https://cdn.prod.website-
files.com/67ee365c25e6530594
bd40c2/
6a0b6c4fd80e0f5353ac1d11_2026_StateOfAV_AnnualReport_vs6_Web.pdf?utm_sou
rce=
press_release&utm_medium=referral&utm_campaign=stateofav_2026&utm_conten
t=annual_
report
---------------------------------------------------------------------------
 The forthcoming surface transportation reauthorization presents one 
of the most significant near-term opportunities for Congress to advance 
a Federal AV policy framework, and AVIA urges the Subcommittee to seize 
it.
The Safety Imperative
 The United States faces an ongoing public health crisis on its 
roads. In 2024, more than 39,000 Americans died in motor vehicle 
crashes, following three consecutive years of traffic deaths exceeding 
40,000. Pedestrian fatalities have reached their highest levels in 
decades. The National Safety Council estimates that the total cost of 
motor vehicle injuries in 2024 alone reached $559.3 billion.\3\
---------------------------------------------------------------------------
 \3\ National Safety Council (2026) https://injuryfacts.nsc.org/
motor-vehicle/overview/intro-
duction/
---------------------------------------------------------------------------
 Autonomous vehicles offer a meaningful opportunity to reduce these 
unnecessary deaths. Automated driving systems (``ADS'') operate without 
distraction, impairment, or fatigue--the human errors responsible for 
the vast majority of crashes. The data from real-world deployments is 
increasingly clear. For example, AVIA's Robotaxi Report found that in 
San Francisco alone AVs generated $71 million in safety-related 
economic savings for residents--costs avoided from medical bills, 
vehicle repairs, insurance claims, and lost productivity.\4\ In 
addition, Swiss Re's analysis of Waymo operations found a 76 percent 
reduction in property damage claims compared to human drivers.\5\ A 
Virginia Tech Transportation Institute study found that full-scale 
deployment of occupantless AVs for delivery services could reduce 
roadway deaths by 58.2 percent.\6\
---------------------------------------------------------------------------
 \4\ AVIA Robotaxi Report (2025) https://cdn.prod.website-files.com/
67ee365c25e6530594bd4
0c2/6930ab29af2f0cc7461e061b_Robotaxi%20Report.pdf
 \5\ Waymo. New Swiss Re study: Waymo is safer than even the most 
advanced human-driven vehicles (2024) https://waymo.com/blog/2024/12/
new-swiss-re-study-waymo/
 \6\ Virginia Tech Transportation Institute. Estimating Crash 
Consequences for Occupantless Automated Vehicles, (2021). https://
vtechworks.lib.vt.edu/server/api/core/bitstreams/a28aa
936-8f89-4302-8859-ee54d34358e2/
content.
---------------------------------------------------------------------------
The Economic and Mobility Opportunity
 The benefits of autonomous vehicles extend well beyond safety. By 
2050, the value of public and consumer benefits from widespread AV 
deployment--including reduced congestion, avoided crashes, and saved 
time--could reach $796 billion annually.\7\ Wider AV deployment could 
create more than three million new jobs by 2035 and raise annual 
earnings for all U.S. workers by between $203 and $267 per worker per 
year.\8\
---------------------------------------------------------------------------
 \7\ Securing America's Future Energy, America's Workforce and the 
Self-Driving Future 
9 (2018), https://avworkforce.secureenergy.org/wp-content/uploads/2018/
06/SAFE_AV_Policy_
Brief.pdf
 \8\ Securing America's Future Energy, America's Workforce and the 
Self-Driving Future 
9 (2018), https://avworkforce.secureenergy.org/wp-content/uploads/2018/
06/SAFE_AV_Policy_
Brief.pdf
---------------------------------------------------------------------------
 For Americans currently underserved by the transportation system, 
AVs represent tremendous promise for their daily lives and 
opportunities. The U.S. Department of Transportation estimates that 
25.5 million Americans face travel-limiting disabilities, and roughly 
560,000 people with disabilities never leave their homes due to 
transportation barriers.\9\ A National Disability Institute study found 
that wider AV deployment could create 4.4 million jobs for people with 
disabilities and generate a 3.8 percent increase in U.S. GDP. For 
elderly Americans, rural communities, and residents of transit deserts, 
AVs can provide access to employment, healthcare, and opportunity that 
current transportation options do not.\10\
---------------------------------------------------------------------------
 \9\ ADA at DOT: Accessibility Initiatives, U.S. Dep't of Transp. 
(Feb. 13, 2025), https://www.transportation.gov/accessibility; Bureau 
of Transp. Stat., Transportation Difficulties Keep Over Half a Million 
Disabled at Home (2012), https://www.bts.gov/archive/publications/
special_reports_and_issue_briefs/issue_briefs/number_03/entire
 \10\ Dominic Modicamore et al., Economic Impacts of Removing 
Transportation Barriers to Employment for Individuals with Disabilities 
Through Autonomous Vehicle Adoption (2022), https://
www.nationaldisabilityinstitute.org/wp-content/uploads/2023/02/ndi-
economicimpacts
ofremovingtransportationbarriers.pdf
---------------------------------------------------------------------------
The Case for Inclusion in Surface Reauthorization
 Autonomous vehicle deployment progress has occurred despite the 
absence of a comprehensive Federal policy framework--a gap that leaves 
American companies operating under a fragmented set of state 
requirements and at a disadvantage relative to competitors in China and 
other countries that have already established regulatory certainty for 
AV developers. Only the Federal government can set nationally 
applicable vehicle design and performance standards, and the surface 
transportation reauthorization is the appropriate vehicle for Congress 
to exercise that authority. These Federal requirements can--and 
should--respect state authority over certain elements of motor vehicle 
regulation, including autonomous vehicles.
 AVIA urges the Subcommittee to support inclusion of strong 
autonomous vehicle policy in the reauthorization. These policies should 
make progress on nationally applicable standards for ADS-equipped 
vehicles and support the wider deployment of AVs that will deliver 
safety and mobility benefits to communities across the country.
 In January 2025, AVIA published Securing American Leadership in 
Autonomous Vehicles, a comprehensive set of Federal policy 
recommendations to accelerate the safe and timely deployment of AV 
technology and solidify U.S. global leadership in this field. That 
document provides a roadmap for the Subcommittee in establishing 
Federal policy that encourages American excellence on autonomous 
vehicles. Many of AVIA's priorities have been incorporated into the 
SELF DRIVE Act, sponsored by Representative Bob Latta, and the AMERICA 
DRIVES Act, sponsored by Representative Vince Fong. Many of the 
concepts in Rep. Fong's AMERICA DRIVES Act are included in the BUILD 
America 250 Act from Chairman Graves and Ranking Member Larsen. This 
bill was voted out of the House Transportation and Infrastructure 
Committee by a vote of 62-2. AVIA strongly encourages the Subcommittee 
to consider these priorities as it develops its own approach.
 The United States currently leads the world in autonomous vehicle 
technology. The surface transportation reauthorization is an 
opportunity to support American leadership with a Federal framework 
that matches the ambition of the technology. AVIA looks forward to 
working with Chairman Young, Ranking Member Peters, and the full 
Subcommittee to ensure that outcome.
 Thank you for considering AVIA's perspective.
 Sincerely,
 Jeff Farrah,
 Chief Executive Officer,
 Autonomous Vehicle Industry Association.
 ______
 
 Intermodal Association of North America
 June 8, 2026

Hon. Ted Cruz,
Chairman,
Senate Committee on Commerce, Science, and Transportation,
Washington, DC.

Hon. Todd Young,
Chairman,
Senate Committee on Commerce, Science, and Transportation,
Subcommittee on Surface Transportation, Freight, Pipelines, and Safety,
Washington, DC.
Hon. Maria Cantwell,
Ranking Member,
Senate Committee on Commerce, Science, and Transportation,
Washington, DC.

Hon. Gary Peters,
Ranking Member,
Senate Committee on Commerce, Science, and Transportation,
Subcommittee on Surface Transportation, Freight, Pipelines, and Safety,
Washington, DC.

Re: The Need for Speed: How Technological Advances are Driving 
 Transportation Innovation

 Dear Chairman Cruz, Ranking Member Cantwell, Subcommittee Chairman 
Young, Subcommittee Ranking Member Peters, and Members of the Senate 
Commerce Subcommittee on Surface Transportation, Freight, Pipelines, 
and Safety:

 As your Committee contemplates a regulatory framework that balances 
safety and innovation, I write on behalf of the Intermodal Association 
of North America (IANA) urging a mode-neutral approach to technology.
 As the only transportation trade association representing the 
combined interests of intermodal freight providers and customers, IANA 
represents more than 1,000 corporate members, including railroads, 
ocean carriers, ports, intermodal truckers and over-the-road highway 
carriers, intermodal marketing and logistic companies, and suppliers to 
the industry. IANA's associate (non-voting) members include shippers 
(defined as the beneficial owners of the freight to be shipped), 
academic institutions, government entities, and non-profit trade 
associations.
 IANA's membership spans the supply chain and operates across road, 
rail, and water. The intermodal freight system is highly efficient, 
combining the benefits and advantages of each mode to deliver 
containerized goods safely, reliably, and cost effectively. Our 
nation's supply chains depend upon these seamless connections between 
transportation modes.
 To ensure the continued success and competitiveness of the freight 
network, it is essential that policymakers allow industry to advance 
technology that has a proven record of delivering equivalent--or 
superior--safety outcomes, regardless of mode. A regulatory framework 
for technological innovation that favors one mode over another harms 
supply chain interoperability as well as competition. When developing 
policies to support innovation, we urge Congress to take a holistic 
approach to further data-driven technological advancements.
 We've recently observed inconsistency across modes in Federal 
policymaking. For example, a single legislative proposal is seeking to 
advance a framework that identifies pathways for addressing safety-
related operational barriers to the deployment of autonomous commercial 
trucks, while simultaneously codifying a minimum crew-size requirement 
and limiting the independent utility of automated track inspections for 
freight railroads. This mismatch pits modes against each other, 
launching one into the future and keeping another in the past. Parity 
across all modes is a critical element in advancing a technological 
framework.
 I appreciate the Committee's dedication to working with industry 
practitioners as emerging technology presents new policy 
considerations. As an association that works across all modes, IANA 
stands ready to be a resource in this important discussion and I hope 
you'll call on us.
 Thank you,
 Sincerely,
 Anne Reinke,
 President and CEO,
 Intermodal Association of North America.

 Senator Young. So thank you to all our witnesses for their 
important testimony today. Senators will have until the close 
of business on June 16 to submit questions for the record. The 
witnesses will have until close of business on June 30 to 
respond to those questions.
 This concludes today's hearing. The Committee stands 
adjourned.
 [Whereupon, at 11:37 a.m., the Subcommittee was adjourned.]

 A P P E N D I X

 June 9th, 2026

Hon. Todd Young, Chair,
Hon. Gary Peters, Ranking Member,
Committee on Commerce, Science, and Transportation,
Subcommittee on Surface Transportation, Freight, Pipelines, and Safety,
United States Senate,
Washington, DC.

RE: ``The Need for Speed: How Technological Advances Are Driving 
 Transportation Innovation''

Dear Chairman Young, Ranking Member Peters, and Members of the Senate 
 Subcommittee on Surface Transportation, Freight, Pipelines, 
 and Safety,

 Thank you for convening a hearing on ``The Need for Speed: How 
Technological Advances Are Driving Transportation Innovation''. 
Technology undoubtedly plays a vital role in transportation, and no one 
knows that better than Train Dispatchers.
 The U.S. rail network depends on Computer-Aided Train Dispatching 
(CAD) Systems--software that shows where trains are, how routes are 
lined, and which tracks are occupied. These systems are relied upon by 
Train Dispatchers (or Rail Traffic Controllers) to authorize safe train 
movements, issue and enforce speed restrictions, protect grade crossing 
malfunctions, and to provide safety protection for trains, on-track 
workers, and the communities they operate through.
 America's freight and passenger railroads use these computer-based 
dispatch systems to move and coordinate train traffic and to provide 
protection to employees working on main tracks. Software for these 
systems is developed and maintained by vendors contracted by the 
railroads. Yet, new dispatching systems and updates to existing 
programs are presently implemented without any oversight, testing, or 
regulation by the Federal Railroad Administration (FRA). Moreover, when 
software problems are identified, including problems critical to the 
safe movement of trains, the railroads and vendors are often slow to 
resolve such issues in a timely manner. This leaves the users, Train 
Dispatchers, being forced to identify problems and troubleshoot the 
technology under live conditions and use ``work arounds'' (in some 
cases for several months) until safety defects are corrected.
 Likewise, this means there are no cybersecurity requirements to 
ensure the protection of these vital train-control systems. Just 
recently, the FRA, in coordination with a larger government campaign on 
cybersecurity, issued a notice that the U.S. railroad network is likely 
at-risk from Iranian-state-sponsored cyber actors.\1\
---------------------------------------------------------------------------
 \1\ https://www.cisa.gov/news-events/cybersecurity-advisories/aa26-
097a
---------------------------------------------------------------------------
 Train dispatching systems must be subject to FRA oversight, review, 
and approval, like other technologies that prevent train collisions and 
incidents, such as Positive Train Control (PTC) systems. On numerous 
occasions, system defects, errors, and malfunctions have put both 
passenger and freight rail at-risk. These include near head-on 
collisions at a major commuter rail, near miss fatalities of roadway 
workers, and more. In the last nine months alone, the American Train 
Dispatchers Association has received over 80 train dispatcher software 
error reports. The reliability and security of these systems is of 
utmost concern to train dispatchers.
 In July 2025, Canadian National Railway experienced a CAD system 
outage that affected its entire 6,400-mile U.S. network, leaving 
dispatchers unable to track train movements across 16 states. In August 
2025, a system error at Norfolk Southern removed critical safety 
protection from the dispatching system while maintenance crews were 
working on active track. In November 2025, BNSF Railway experienced a 
widespread dispatching system outage affecting approximately 94 percent 
of its network across 28 states, leaving dispatchers unable to reliably 
track train movements or control routing. In January 2026, ATDA became 
aware that Norfolk Southern dispatchers were required to remove all 
safety blocks, info tags, track authorities, speed restrictions, and 
crossing protection blocks to update the system. These incidents are 
not isolated events and illustrate the systemic risks posed by 
unregulated dispatching technology. Our members experience the day-to-
day challenges of these technologies, and while technological advances 
are often positive developments, they must be done in a way that ensure 
that they are thoroughly test, properly vetted, and appropriately 
maintained to ensure the safety of the general public. The technology 
must also serve to support the workers utilizing the technology rather 
than creating additional safety risks.
 Certifying that these technologies are safe and effective is not 
only vital for public safety and for the protection of our communities, 
but is also economically logical, profitable for railroads, and 
provides for the protection of our supply chain. Accidents, 
derailments, and fatalities cause tragic distress to our communities in 
a multitude of ways and are avoidable. We must guarantee to the highest 
extent possible that technological innovation does what it is meant to 
do: supplement the tools available to professionals, not create 
additional safety hazards, increase workloads, or security concerns. 
Granting the FRA oversight over dispatching technology will make sure 
that vendors are held accountable for their product and verify that 
innovation in transportation technology is safe, reliable, and properly 
maintained. Congress must implement directives that prioritize 
oversight of these systems, as innovation without safety and security 
is no innovation at all.
 We thank the committee for their consideration of these issues and 
look forward to working together to improve rail safety in technology 
innovation.
 Respectfully,
 L. Ed Dowell,
 President,
 American Train Dispatchers Association.
 ______
 
 Advocates for Highway and Auto Safety
 June 8, 2026

Hon. Todd Young, Chair
Hon. Gary Peters, Ranking Member
Committee on Commerce, Science, and Transportation
Subcommittee on Surface Transportation, Freight, Pipelines, and Safety
United States Senate
Washington, DC

Dear Chair Young and Ranking Member Peters:

 Thank you for convening tomorrow's hearing, ``The Need for Speed: 
How Technological Advances Are Driving Transportation Innovation.'' 
Advocates for Highway and Auto Safety (Advocates) urges this 
Subcommittee to advance proven solutions to improve safety on our 
Nation's roads and establish sensible safeguards to ensure self-driving 
vehicles are developed and deployed safely. Advocates respectfully 
requests this letter be included in the hearing record.
Motor Vehicle Deaths Remain Historically High Resulting in a Tremendous 
 Personal and Economic Cost to all Americans
 America's roads are moving an ever-increasing number of people and 
goods.\1\ This activity comes with a significant yet preventable human 
toll as well as infrastructure challenges and a robust price tag. On 
average, 108 people were killed every day on roads in the U.S., 
totaling over 39,000 fatalities in 2024.\2\ This is a 20 percent 
increase in deaths in just a decade.\3\ An additional 2.742 million 
people were injured.\4\ Early projections for 2025 traffic fatalities 
remain at a high level; over 36,640 people are estimated to have been 
killed that year.\5\
---------------------------------------------------------------------------
 \1\ 2025 Report Card for America's Infrastructure, American Society 
of Civil Engineers, https://infrastructurereportcard.org/cat-item/
roads-infrastructure/
 \2\ Traffic Safety Facts Research Note: Overview of Motor Vehicle 
Traffic Crashes In 2024, NHTSA, Apr. 2026, DOT HS 813 791, (Overview 
2024).
 \3\ Overview 2024; and Traffic Safety Facts 2023: A Compilation of 
Motor Vehicle Traffic Crash Data, NHTSA, Aug. 2025, DOT HS 813 738 
(Annual Report 2023).; [comparing 2014 to 2024].
 \4\ Overview 2024.
 \5\ Traffic Safety Facts: Crash Stats, Early Estimate of Motor 
Vehicle Traffic Fatalities in 2025, NHTSA, Apr. 2026, DOT HS 813 800 
(Early Estimates 2025).
---------------------------------------------------------------------------
 The annual economic cost of motor vehicle crashes is approximately 
$340 billion (2019 dollars).\6\ This figure equates to every person 
living in the U.S. essentially paying an annual ``crash tax'' of over 
$1,000. Moreover, the total value of societal harm from motor vehicle 
crashes in 2019, which includes loss of life, pain and decreased 
quality of life, was nearly $1.4 trillion.\7\ When adjusted solely for 
inflation, this figure amounts to $1.81 trillion.\8\ Research from the 
Network of Employers for Traffic Safety (NETS) finds motor vehicle 
crashes cost employers $72.2 billion in direct crash-related expenses 
in 2019.\9\
---------------------------------------------------------------------------
 \6\ The Economic and Societal Impact of Motor Vehicle Crashes, 
2019, NHTSA, Dec. 2022, DOT HS 813 403. (Economic and Societal Impact 
2019).
 \7\ Economic and Societal Impact 2019.
 \8\ CPI Inflation Calculator, BLS, available at https://
www.bls.gov/data/inflation_calculator
.htm, calculated from Jan. 2019-Jan. 2026.
 \9\ Cost of Motor Vehicle Crashes to Employers--2019, Network of 
Employers for Traffic Safety, March 2021.
---------------------------------------------------------------------------
 In 2024, 5,340 people were killed and over 161,000 people were 
injured in crashes involving large trucks.\10\ Since 2009, the number 
of fatalities in large truck crashes has increased by 58 percent.\11\ 
In that same timespan, the number of people injured in crashes 
involving large trucks rose by 118 percent.\12\ In fatal two-vehicle 
crashes between a large truck and a passenger motor vehicle, 97 percent 
of the fatalities were occupants of the passenger vehicle.\13\ Truck 
driving is identified as one of the most dangerous occupations in the 
U.S. by the Bureau of Labor Statistics.\14\ In 2024, 920 occupants of 
large trucks were killed in crashes.\15\
---------------------------------------------------------------------------
 \10\ Overview 2024
 \11\ Annual Report 2024, Note, the 58 percent figure represents the 
overall change in the number of fatalities in large truck involved 
crashes from 2009 to 2024. However, between 2015 and 2016 there was a 
change in data collection at U.S. DOT that could affect this 
calculation. From 2009 to 2015 the number of fatalities in truck-
involved crashes increased by 21 percent, and between 2016 to 2024, it 
increased by 14 percent, and between 2015 and 2016, it increased by 14 
percent.
 \12\ Annual Report 2024, Note, the 117 percent figure represents 
the overall change in the number of people injured in large truck 
involved crashes from 2009 to 2024. However, between 2015 and 2016 
there was a change in data collection at U.S. DOT that could affect 
this calculation. From 2009 to 2015 the number of people injured in 
truck-involved crashes increased by 59 percent, and between 2016 to 
2024, it increased by 20 percent, and between 2015 and 2016, it 
increased by 14 percent.
 \13\ Insurance Institute for Highway Safety (IIHS), Large Trucks. 
https://www.iihs.org/topics/fatality-statistics/detail/large-trucks.
 \14\ National Census of Fatal Occupational Injuries in 2024, Bureau 
of Labor Statistics, Feb. 2026, USDL-26-0230, available at: https://
www.bls.gov/news.release/pdf/cfoi.pdf.
 \15\ Overview 2024.
---------------------------------------------------------------------------
 According to the Federal Highway Administration (FHWA), traffic 
incidents, which include crashes, are one of the seven main causes of 
traffic congestion which erodes the reliability of travel time.\16\ The 
report notes that for truck operators, ``[t]he cost of unexpected delay 
can add another 20 percent to 250 percent'' to their hourly costs.\17\ 
The cost to society from crashes involving large trucks and buses was 
estimated to be $152 billion in 2022, the latest year for which data is 
available.\18\ When adjusted solely for inflation, this figure amounts 
to nearly $176 billion.\19\
---------------------------------------------------------------------------
 \16\ Traffic Congestion and Reliability: Trends and Advanced 
Strategies for Congestion Mitigation, March 2020, FHWA. Available here: 
https://ops.fhwa.dot.gov/congestion_report/chapter2.htm (2020 Traffic 
Congestion and Reliability Report.)
 \17\ 2020 Traffic Congestion and Reliability Report.
 \18\ 2024 Pocket Guide to Large Truck and Bus Statistics, FMCSA, 
Jul. 2025, RRA-24-002.
 \19\ CPI Inflation Calculator, BLS, available at https://
www.bls.gov/data/inflation_calculator
.htm, calculated from Jan. 2022-Jan. 2026.
---------------------------------------------------------------------------
 These devastating crashes impact millions of Americans each year 
including the families of U.S. Department of Transportation (U.S. DOT) 
Secretary Duffy and Members of Congress. These tragedies result in 
long-lasting effects which often are not accounted for in statistics 
alone. For every single death and serious injury, there is a horrific 
ripple effect forever changing the lives of children, parents, friends 
and communities.
Major Contributors of Crashes Must be Addressed
 We urge this Subcommittee to continue to address the leading 
contributing factors to motor vehicle crashes. In 2024, alcohol 
impaired driving resulted in 11,904 people killed;\20\ speeding 
resulted in 11,288 people killed;\21\ 9,758 vehicle occupants killed in 
crashes were unrestrained;\22\ and, crashes in which at least one 
driver was distracted resulted in 3,208 fatalities.\23\ In 2024, 7,080 
pedestrians and 1,103 pedalcyclists were killed in traffic crashes.\24\ 
Motorcycles continue to be the most hazardous form of motor vehicle 
transportation;\25\ 6,228 riders were killed in 2024.\26\ From 2014-
2024, fatalities of pedestrians increased 44 percent, pedalcyclists 
increased 51 percent and motorcyclists increased 36 percent.\27\ 
Additionally, in 2021, the most recent year for which data is available 
according to the Non-Traffic Surveillance (NTS) system, an estimated 
3,990 people were killed in non-traffic motor vehicle crashes, an 
increase of 26 percent from 2020.\28\ These issues are persistent, and 
the solutions are known and available, yet remain underused, 
underfunded or are not required as standard equipment in vehicles.
---------------------------------------------------------------------------
 \20\ Overview 2024.
 \21\ Id.
 \22\ Id.
 \23\ Id. These crashes are known to be underreported and 
undercounted.
 \24\ Id.
 \25\ The Economic and Societal Impact of Motor Vehicle Crashes, 
2019 (Revised), NHTSA, Feb. 2023, DOT HS 813 403.
 \26\ Overview 2024.
 \27\ Annual Report 2023 and Overview 2024.
 \28\ Traffic Safety Facts Crash Stats: Non-Traffic Surveillance: 
Fatality and Injury Statistics in Non-Traffic Crashes in 2021, NHTSA, 
Apr. 2024, DOT HS 813 539.
---------------------------------------------------------------------------
Experimental Autonomous Driving Technology Remains Unproven
 Vehicles equipped with various levels of automated driving systems 
(ADS) have been involved in numerous serious and deadly crashes, many 
of which have been subject to investigation by the National 
Transportation Safety Board (NTSB) and the National Highway Traffic 
Safety Administration (NHTSA).\29\ As NHTSA noted in the 2025 Notice of 
Proposed Rulemaking (NPRM) on the ADS-Equipped Vehicle Safety, 
Transparency, and Evaluation Program (AV STEP), vehicles equipped with 
ADS ``. . . often struggle with driving tasks that humans consider 
relatively simple.'' \30\ Furthermore, according to data collected by 
NHTSA's Standing General Order (SGO) 2021-1 requiring manufacturers to 
report certain crashes involving vehicles equipped with ADS or SAE 
Level 2 advanced driver assistance systems (ADAS), there have been 
approximately 2,357 crashes involving ADS and 3,682 with ADAS. These 
include 58 crashes resulting in a fatality.\31\
---------------------------------------------------------------------------
 \29\ Ian Duncan and Aaron Gregg, Crashes involving Tesla's Full 
Self-Driving prompt new Federal probe, WaPo (Oct. 18, 2024).
 \30\ 90 FR 4132.
 \31\ Standing General Order on Crash Reporting: For Incidents 
Involving ADS and Level 2 ADAS, NHTSA, available at https://
www.nhtsa.gov/laws-regulations/standing-general-order-crash-reporting, 
last accessed June 2, 2026.
---------------------------------------------------------------------------
 According to media reports, numerous dangerous incidents involving 
autonomous vehicles (AVs) continue to occur including failing to stop 
for school buses,\32\ ceasing operating in the middle of city streets 
during a power outage,\33\ traveling on light rail tracks causing the 
robotaxi's passenger to flee,\34\ swarming a residential cul-de-sac\35\ 
and navigating flooded streets.\36\ NHTSA and the NTSB have opened 
investigations into the incidents involving school buses. Earlier this 
year, a child was reportedly hit by an autonomous vehicle during school 
drop off.\37\ Aptly put, an individual who has witnessed AV operations 
remarked that the vehicles ``are driving like teenagers.'' \38\ It 
should be noted that teenagers are the most dangerous age group of 
drivers.\39\ Not surprisingly, according to a recent public opinion 
poll commissioned by Advocates, 81 percent of respondents are concerned 
about sharing the road with driverless cars.\40\ Trepidation is even 
higher for driverless tractor-trailer and delivery trucks, with 85 
percent expressing concern, including a majority (54 percent) who are 
``very'' concerned.\41\
---------------------------------------------------------------------------
 \32\ Mary Cunningham, Waymo recalls more than 3,000 vehicles over 
faulty software following school bus violations, CBS News (Dec. 
11,2025).
 \33\ Grace Eliza Goodwin, Waymo robotaxis stop in the streets 
during San Francisco power outage, BBC News (Dec. 22, 2025).
 \34\ Mickaela Castillo, Waymo passenger flees after car drives on 
Phoenix light rail tracks, AZ Family News (Jan. 8, 2026).
 \35\ Angeline Jane Bernabe, Empty Waymo vehicles swarm Atlanta cul-
de-sac, ABC News, May 15, 2026.
 \36\ Isaiah Richard, Waymo Has Not Fixed the Problem of Its 
Robotaxis Driving Through Flood, Tech Times (May 22, 2026).
 \37\ Washington Post, Waymo robotaxi hits child at school drop-off, 
triggering safety inquiry, Jan. 19, 2026.
 \38\ Blake Ellis, Melanie Hicken, Yahya Abou-Ghazala, `Driving like 
teenagers': Waymo robotaxis have run red lights and nearly hit 
pedestrians, CNN finds, CNN (Jun. 3, 2026).
 \39\ See: https://www.cdc.gov/teen-drivers/risk-factors/index.html
 \40\ See: https://saferoads.org/2026-av-tech-truck-poll/
 \41\ Id.
---------------------------------------------------------------------------
 If incidents such as the aforementioned had involved autonomous 
commercial motor vehicles (ACMVs), which are significantly larger and 
heavier with more stopping distance needed, the results could have been 
catastrophic, and the death and injury toll could have been much worse. 
Some of the most pressing safety shortcomings associated with AV 
technology, which include the ADS properly detecting and reacting to 
all other road users, driver engagement and cybersecurity, are 
exponentially amplified by the greater crash force of an ACMV.
``We Must Not Promise What We Ought Not, Lest We Be Called on to 
 Perform What We Cannot''\42\
---------------------------------------------------------------------------
 \42\ The Complete Papers and Writings of Abraham Lincoln.
---------------------------------------------------------------------------
 Many promises have been touted about AVs bringing reductions in 
motor vehicle crashes and resultant deaths and injuries, lowering 
traffic congestion and vehicle emissions, expanding mobility and 
accessibility, improving efficiency, and creating more equitable 
transportation options and opportunities.\43\ However, as auto industry 
leaders have acknowledged, these outcomes are far from certain.\44\
---------------------------------------------------------------------------
 \43\ Autonomous Vehicle Industry Association, State of AV Report 
2025.
 \44\ Kristopher Brooks, The main reason why self-driving cars are 
not ready for prime time, CBS News (May 1, 2024); Nilay Patel and 
Andrew J. Hawkins, Pete Buttigieg is Racing to Keep Up with Self 
Driving Cars. The Verge (Jan. 6, 2022); Rebecca Fannin, Where the 
billions spent on autonomous vehicles by U.S. and Chinese giants is 
heading, CNBC (May 23, 2022).
---------------------------------------------------------------------------
 AV manufacturers and proponents of the technology often claim that 
AVs are safer because they don't get tired, distracted or drive 
impaired. While some AVs may be readily able to avoid crashes caused by 
those human drivers who operate impaired, fatigued or distracted, they 
also may cause crashes that sober, alert and engaged drivers would 
routinely avoid. AVs, which are essentially billion-dollar pieces of 
equipment with years of research, should not drive better than only the 
worst drivers on the road.
 Additionally, supporters of AVs often assert that these vehicles 
will improve roadway safety by inaccurately stating that 94 percent of 
crashes are due to human error pointing to a report from NHTSA as 
support for this misleading claim. However, the agency stated in the 
same document with this statistic that ``[a]lthough the critical reason 
is an important part of the description of events leading up to the 
crash, it is not intended to be interpreted as the cause of the crash 
nor as the assignment of the fault to the driver, vehicle, or 
environment.'' \45\ [Emphasis added.] In addition, NTSB Chair Jennifer 
Homendy has declared that using the statistic in such a manner is 
``dangerous'' and ``[a]t the same time it relieves everybody else of 
responsibility they have for improving safety, including DOT.'' \46\ 
Proponents of AVs also have made the claim that these vehicles will 
prevent 90 percent of crash fatalities.\47\ Yet, as NHTSA states in the 
AV STEP NPRM, ``[t]his proposal recognizes that the potential of ADS is 
still largely unproven.'' \48\
---------------------------------------------------------------------------
 \45\ Singh, S. (2015, February). Critical reasons for crashes 
investigated in the National Motor Vehicle Crash Causation Survey. 
(Traffic Safety Facts Crash Stats. Report No. DOT HS 812 115). 
Washington, DC: National Highway Traffic Safety Administration.
 \46\ Hope Yen and Tom Krisher, NTSB chief to fed agency: Stop using 
misleading statistics, Associated Press (Jan. 18. 2022).
 \47\ Iyad Rahwan and Azim Shariff, Self-Driving Cars Could Save 
Many Lives. But Mental Roadblocks Stand in the Way. Wall Street Journal 
(Apr. 6, 2021).
 \48\ 90 FR 4132.
---------------------------------------------------------------------------
 Often, claims made about the safety of their operations do not 
provide a complete picture. For example, as of December 2025, ``Waymo 
has driven 170.7 million rider-only miles without a human driver.'' 
\49\ Human beings drove 3.29 trillion miles on U.S. roads in 2024 
alone. Thus, in its entire history from approximately 2019 to December 
2025, Waymo vehicles have operated without a human driver for less than 
0.005 percent of the mileage driven on U.S. roads by human drivers in a 
single year.\50\
---------------------------------------------------------------------------
 \49\ https://waymo.com/safety/impact/
 \50\ Overview 2024.
---------------------------------------------------------------------------
 Waymo claims reductions in ``serious injury or worse crashes,'' 
``airbag deployment in any vehicle crashes,'' and ``injury-causing 
crashes.'' \51\ However, over 45 percent of the crashes reported by 
Waymo pursuant to the SGO had no human occupants in the vehicle. The 
absence of passengers in a Waymo vehicle in a crash by default lowers 
the injury rate and could be unrelated to the safety performance of the 
vehicle given that there was no occupant available to be injured. 
Moreover, if the goal of AV operations is to transport people, claiming 
a safety benefit from crashes where no occupant is present is 
incongruous. Additionally, the majority of the incidents reported by 
Waymo pursuant to the SGO involved the Waymo vehicle being struck in 
the rear on roads with speed limits of 25 mph or less, conditions not 
generally associated with airbag deployments. In sum, Waymo vehicles 
are operating on roads with lower speed limits and are over involved in 
rear end crashes, with a large number of incidents not involving 
passengers in the vehicle.
---------------------------------------------------------------------------
 \51\ https://waymo.com/safety/
---------------------------------------------------------------------------
 Additionally, a recent Reuters Special Report revealed that while 
Tesla plans its ``Full Self Driving'' (FSD) systems will soon make all 
Teslas fully autonomous, ``interviews with nine former labelers and a 
former Tesla self-driving engineer show that the technology continued 
to struggle in recent months to execute basic maneuvers--such as 
avoiding emergency vehicles or stopping for school buses loading or 
unloading students.'' It also reported that Tesla executives have 
increasingly touted FSD's safety as they pushed Tesla to stage public 
displays of the fully autonomous capability. The article continued:

 The displays include a robotaxi pilot in Austin, Texas launched 
 last June with some human safety monitors in the cars and 
 others working remotely. Inside Tesla, as these events 
 approached, staffers worked long hours mapping routes and 
 training the software on specific hazards to make the company's 
 self-driving technology appear more capable than it really is, 
 four of the former Tesla employees told Reuters. The staffers 
 said these labor intensive safeguards are impossible to deploy 
 on a broad scale.\52\
---------------------------------------------------------------------------
 \52\ By Chris Kirkham and Rachael Levy, Why Tesla's AI trainers 
don't trust its self-driving tech--or its safety stats, Reuters (May, 
28 2026).

 Lastly, the SGO does not provide the data needed to fully analyze 
the operational difficulties and incidents that are occurring. To 
properly assess the safety of these operations, additional performance 
data beyond crashes is needed considering events such as Waymo vehicles 
traveling on light rail tracks and passing school buses.\53\
---------------------------------------------------------------------------
 \53\ Mickaela Castillo, Waymo passenger flees after car drives on 
Phoenix light rail tracks, AZ Family News (Jan. 8, 2026); Mary 
Cunningham, Waymo recalls more than 3,000 vehicles over faulty software 
following school bus violations, CBS News (Dec. 11, 2025).
---------------------------------------------------------------------------
The U.S. is Not Lagging Behind Other Countries in Deployment
 In sharp contrast to what is happening in the U.S., other countries 
are taking a more calculated, careful and cautious approach to the 
development of AVs.\54\ Often-repeated claims about the U.S. ``falling 
behind'' other countries in the ``race'' for AVs are simply not true 
nor supported by research. For example:
---------------------------------------------------------------------------
 \54\ Autonomous vehicles: cross jurisdictional regulatory 
perspectives update, Oct. 7, 2022.

 China continues to require permits or restricts operations 
 of AVs on its roads to only those areas approved by the 
 authorities.\55\ In fact, the Nation recently delayed plans for 
 production of AVs after a deadly crash.\56\
---------------------------------------------------------------------------
 \55\ China drafts rules on use of self-driving vehicles for public 
transport; Aug. 8, 2022, Reuters; and Baidue bags China's first fully 
driverless robotaxi licenses, Aug. 7, Reuters. Real driverless cars are 
now legal in Shenzhen, China's tech hub, Jul. 25, 2022, TechCrunch+.
 \56\ Keith Bradsher, China Delays Plans for Mass Production of 
Self-Driving Cars After Accident, NY Times (Dec. 23, 2025).

 Germany continues to require permits, approvals, and limits 
 areas of operation for AVs.\57\
---------------------------------------------------------------------------
 \57\ Germany completes legal framework for autonomous driving | 
Federal Cabinet approves new ordinance, Apr. 2022, Malterer, M.

 In Japan, the introduction of Level 4 vehicles will be 
 controlled and limited to specific, lightly populated 
 areas.\58\
---------------------------------------------------------------------------
 \58\ Japan to open roads to autonomous vehicles in 2023, Nov. 28, 
2022, Wessling, B., The RobotReport.

 The latest United Nations Economic Commission for Europe 
 (UNECE) regulations will limit operations to restrict risks and 
 oversee approval through testing and other requirements.\59\
---------------------------------------------------------------------------
 \59\ New rules to improve road safety and enable fully driverless 
vehicles in the EU, Jul. 6, 2022, UNECE.

 In sum, no country is selling fully automated vehicles for 
unfettered use to the public and by many accounts, none will be for a 
significant amount of time.\60\ According to the most recent KPMG 
analysis, the U.S. ranks fourth in the world for AV readiness, while 
China stands at number twenty.\61\ The U.S. is not lagging behind other 
countries in allowing AVs to go to market, but we are behind in 
establishing comprehensive regulations to ensure public safety will not 
be jeopardized or diminished.
---------------------------------------------------------------------------
 \60\ Lawrence Ulrich, Driverless Still a Long Way From Humanless, 
N.Y. Times (Jun. 20, 2019); Level 5 possible but ``way in the future'', 
says VW-Ford AV boss, Motoring (Jun. 29, 2019).
 \61\ Autonomous Vehicle Readiness Index, KPMG, 2020.
---------------------------------------------------------------------------
Federal Safety Standards Prevent Motor Vehicle Crashes, Save Lives, 
 Avert Injuries and Reduce Associated Costs
 Advocates always has enthusiastically championed proven vehicle 
safety technology and for good reason--it is one of the most effective 
strategies for preventing deaths and injuries. According to NHTSA, 
``[t]he FMVSS [Federal Motor Vehicle Safety Standards] remain NHTSA's 
core way of ensuring that all motor vehicles provide the requisite 
level of safety performance and provide it within a technical 
timeframe.'' \62\ In fact, the agency has estimated that from 1968 
through 2019, NHTSA's safety standards have prevented more than 865,000 
deaths, 49 million nonfatal injuries and damage to 65 million 
vehicles.\63\ In addition, during that time frame the comprehensive 
societal benefits amounted to $17.3 trillion, using 2019 dollars.\64\
---------------------------------------------------------------------------
 \62\ 89 FR 76923, Sep. 19, 2024.
 \63\ Kahane, C. J., & Simons, J. F. (2024, December). Fatalities, 
injuries, and crashes prevented by vehicle safety technologies and 
associated FMVSS, 1968 to 2019--Passenger cars and LTVs (Report No. DOT 
HS 813 611). National Highway Traffic Safety Administration.
 \64\ NHTSA: 50 Years of Vehicle Safety Standards Saved Hundreds of 
Thousands of Lives, Prevented Millions of Injuries.
---------------------------------------------------------------------------
 In 1991, Advocates led the coalition that supported enactment of 
the bipartisan Intermodal Surface Transportation Efficiency Act (ISTEA) 
of 1991\65\ which included a mandate for front seat airbags as standard 
equipment. As a result, by 1997, every new car sold in the United 
States was equipped with this technology and the lives saved have been 
significant. Frontal airbags have saved an estimated 70,059 lives from 
1968 to 2019, according to NHTSA.\66\
---------------------------------------------------------------------------
 \65\ Pub. L. 102-240 (Dec. 18, 1991).
 \66\ Kahane, C. J., & Simons, J. F. (2024, December). Fatalities, 
injuries, and crashes prevented by vehicle safety technologies and 
associated FMVSS, 1968 to 2019--Passenger cars and LTVs (Report No. DOT 
HS 813 611). National Highway Traffic Safety Administration.
---------------------------------------------------------------------------
 Advocates built on this success by supporting additional proven 
lifesaving technologies as standard equipment in all vehicles in other 
Federal legislation and regulatory proposals. These efforts include: 
tire pressure monitoring systems;\67\ rear outboard 3-point safety 
belts;\68\ electronic stability control;\69\ rear safety belt reminder 
systems;\70\ brake transmission interlocks;\71\ safety belts on 
motorcoaches;\72\ rear-view cameras;\73\ safer power window 
switches;\74\ ADAS;\75\ advanced impaired driving prevention 
technology;\76\ rear designated seating position alert (hot cars);\77\ 
enhanced vehicle hood and bumpers to better protect vulnerable road 
users;\78\ and, advanced head lamps.\79\
---------------------------------------------------------------------------
 \67\ Transportation Recall Enhancement, Accountability, and 
Documentation (TREAD) Act, Pub. L. 106-414 (Nov. 1, 2000).
 \68\ Anton's Law, Pub. L. 107-318 (Dec. 4, 2002).
 \69\ Safe, Accountable, Flexible, Efficient Transportation Equity 
Act: A Legacy for Users (SAFETEA-LU), Pub. L. 109-59 (Aug. 10, 2005).
 \70\ Id.
 \71\ Id.
 \72\ Moving Ahead for Progress in the 21st Century (MAP-21) Act, 
Pub. L. 112-141 (Jan. 3, 2012).
 \73\ Cameron Gulbransen Kids Transportation Safety Act of 2007, 
Pub. L. 110-189 (Feb. 28, 2008).
 \74\ Id.
 \75\ Infrastructure Investment and Jobs Act, Pub. L. 117-58 (Nov. 
15, 2021).
 \76\ Id.
 \77\ Id.
 \78\ Id.
 \79\ Id.
---------------------------------------------------------------------------
 The regulatory action undertaken by NHTSA to require pedestrian 
automatic emergency braking (PAEB) on light passenger vehicles is an 
excellent recent example of the benefits of requiring effective safety 
systems as standard equipment. The agency predicts that PAEB will save 
362 lives, mitigate over 24,000 injuries annually and result in a 
yearly cost benefit of between $5.8-$7.2 billion. The Final Rule for 
PAEB issued in 2024 also noted that the end user price for the safety 
technology for a popular make and model vehicle, a Toyota Camry, is 
$240.24.\80\ This cost is modest, particularly given the returns on the 
investment. Moreover, research performed by the Insurance Institute for 
Highway Safety (IIHS) has found that AEB can reduce front-to-rear 
crashes with injuries by 56 percent. Any delay in implementing the 
Final Rule is an unnecessary safety setback.
---------------------------------------------------------------------------
 \80\ Federal Motor Vehicle Safety Standard No. 127; Light Vehicle 
Automatic Emergency Braking (AEB); AEB Test Devices, NHTSA, Final 
Regulatory Impact Analysis, April 2024.
---------------------------------------------------------------------------
 Research also demonstrates that lifesaving vehicle safety 
technologies are not the chief contributor to increased prices for new 
cars. IIHS/Highway Loss Data Institute (HLDI) President David Harkey 
has stated, ``Sacrificing safety is not the way to make cars 
affordable,'' ``. . . safety features aren't the main thing pushing up 
prices.\81\ Buyers are paying more for convenience features such as 
hands-free power liftgates, puddle lights and automatically retracting 
mirrors. Size is also a major factor: Americans continue to gravitate 
toward larger vehicles.'' \82\ Additionally, a 2023 study by Consumer 
Reports (CR) found that ``[c]ommonly reported changes in average 
transaction prices appear to be primarily driven by shifts toward 
larger, more expensive SUVs and away from smaller and cheaper cars, 
rather than from the cost of technology improvements in individual 
models.'' \83\ As a result, CR concluded that ``[t]hese findings prove 
that regulators can and should be aggressive in ensuring that 
automakers continue to deliver cost-effective technology improvements 
that save dollars and lives.'' \84\
---------------------------------------------------------------------------
 \81\ David Harkey, Sacrificing safety is not the way to make cars 
affordable, IIHS Insight (Jan. 20, 2026).
 \82\ David Harkey, Sacrificing safety is not the way to make cars 
affordable, IIHS Insight (Jan. 20, 2026).
 \83\ Consumer Reports, Vehicle Price Trends Fuel Economy and Safety 
Improvements Come Standard.
 \84\ Id.
---------------------------------------------------------------------------
 Crashes, including those that involve some of the leading 
contributors to fatalities, can be prevented or mitigated by AEB and 
other ADAS systems. Research by IIHS has demonstrated significant crash 
reductions associated with these safety systems:\85\
---------------------------------------------------------------------------
 \85\ Real-world benefits of crash avoidance technologies, IIHS, 
July 2023.

[GRAPHIC(S) NOT AVAILABLE IN TIFF FORMAT] 

 We urge this Subcommittee to conduct oversight to ensure the U.S. 
DOT issues the Final Rule for AEB in heavy vehicles and lane departure 
warning (LDW) and lane keeping assist (LKA) in passenger vehicles, as 
Congressionally mandated.\86\ Additionally, we urge Congress to direct 
NHTSA to enhance the AEB rule by including bicycle and motorcycle rider 
detection and response in all lighting conditions.\87\ According to a 
recent poll commissioned by Advocates, 73 percent of respondents 
support requiring AEB to respond to bicyclists and motorcyclists in 
addition to pedestrians.\88\ Research conducted by IIHS found that 
clothing which makes pedestrians stand out to human drivers may make 
them invisible to automated crash prevention systems, so ensuring AEB 
operates properly in all lighting conditions is essential.\89\ The 
Final Rule for AEB in passenger vehicles must be swiftly complied with, 
absent added delay.
---------------------------------------------------------------------------
 \86\ Pub. L. 117-58 (2021).
 \87\ Magnus White Cyclist Safety Act of 2025, H.R. 3649, 119 Cong. 
Sec. 1 (2025); Motor Vehicle Modernization Act of 2026, H.R. 7389, 119 
Cong. Sec. 2 (2026).
 \88\ See: https://saferoads.org/2026-av-tech-truck-poll/
 \89\ IIHS, High-visibility clothing may thwart pedestrian crash 
prevention sensors (Jan. 9, 2025).
---------------------------------------------------------------------------
 We also urge Congress to direct U.S. DOT to issue standards and 
requirements for other vehicle safety technologies shown by research to 
reduce crashes and impacts, including as noted by IIHS research, blind 
spot detection, rear AEB and rear cross traffic alert. Many of these 
systems are already mandated in Europe.\90\ (Please see attached 
chart.) Additionally, two bipartisan bills referred to the Committee on 
Commerce, Science, and Transportation, the She Develops Regulations in 
Vehicle Equality (She DRIVES Act, S. 161) and the Preventing Roadside 
and Work Zone Deaths Act (S. 3871), as well as the Stop Underrides Act 
2.0 (S. 3775) should be advanced.
---------------------------------------------------------------------------
 \90\ See: https://etsc.eu/comparative-overview-eu-us-vehicle-
standards/
---------------------------------------------------------------------------
 The Infrastructure Investment and Jobs Act (IIJA) also directed 
NHTSA to issue a FMVSS requiring passenger motor vehicles to be 
equipped with impaired driving prevention technology by 2024.\91\ IIHS 
research estimates that passive impaired driving prevention technology 
will save more than 10,000 lives each year, once widely deployed.\92\ 
The agency issued an Advanced Notice of Proposed Rulemaking (ANPRM) in 
January 2024 but has taken no further regulatory action.\93\ Until 
NHTSA completes this overdue rulemaking, lives will continue to be 
needlessly lost, injuries suffered and associated costs expended. As 
such, we urge this Subcommittee to employ its oversight authority to 
ensure NHTSA swiftly issues a Final Rule.
---------------------------------------------------------------------------
 \91\ Pub. L. 117-58, Sec. 24220 (2021).
 \92\ Alcohol and Drugs, IIHS.
 \93\ 89 FR 830 (Jan. 5, 2024).
---------------------------------------------------------------------------
 Since 1990, over 1,100 unattended children have been killed in 
``hot cars,'' and 7,500 more have been injured.\94\ Cost effective 
technology exists to prevent these tragedies now. The IIJA directed 
U.S. DOT to issue a Final Rule within two years requiring all new 
passenger motor vehicles weighing less than 10,000 pounds to be 
equipped with a system to alert the operator to check rear-designated 
seating positions after the vehicle engine or motor is deactivated by 
the operator. The U.S. DOT has not taken regulatory action and should 
issue a Final Rule which requires the system to detect occupants in the 
entire passenger compartment rather than rely on reminder systems which 
are less effective. Of note, Euro New Car Assessment Program (NCAP) 
added testing of child detection systems in 2023 (protocol), and from 
2025 onwards will only be assigning points for direct sensing 
systems.\95\
---------------------------------------------------------------------------
 \94\ Kids and Car Safety, Hot Cars, available at: https://
www.kidsandcars.org/hot-cars/media-resources
 \95\ See: https://www.euroncap.com/media/79888/euro-ncap-cpd-test-
and-assessment-protocol-v12.pdf
---------------------------------------------------------------------------
ADS-Equipped Vehicles and Commercial Motor Vehicles (CMVs) Must be 
 Subject to Federal Regulations to Ensure Public Safety
 Autonomous driving technology has made advances yet remains unable 
to consistently operate safely with all road users, conditions and 
scenarios, as evidenced by fatal and serious crashes involving 
passenger motor vehicles equipped with ADS of varying levels.\96\ 
Transparency and robustness in crash and incident data reporting 
involving vehicles equipped with ADS are critical to the safety of 
public roads, the management of cities in which they are operating, and 
for researchers and related industries as well as the U.S. DOT as it 
considers regulatory proposals.
---------------------------------------------------------------------------
 \96\ NHTSA, Standing General Order 2021-01 (Aug. 2021). ADS 
Incident Report Data available here: https://static.nhtsa.gov/odi/ffdd/
sgo-2021-01/SGO-2021-01_Incident_Reports_ADS.csv
---------------------------------------------------------------------------
 To identify a people-and-safety-first path forward on AVs, 
Advocates and numerous stakeholders developed the ``AV Tenets.'' \97\ 
These sound and sensible policy positions should be a foundational part 
of any national AV policy. The AV Tenets are based on expert analysis, 
real-world experience, and public opinion. They have four main 
categories including: 1) prioritizing safety of all road users; 2) 
guaranteeing accessibility and equity; 3) preserving consumer and 
worker rights; and, 4) ensuring local control and sustainable 
transportation. They are supported by a coalition of more than 65 
organizations representing consumers, public health and safety experts, 
pedestrians, bicyclists, disability rights activists, emergency 
responders, law enforcement, labor and others.
---------------------------------------------------------------------------
 \97\ See: https://saferoads.org/autonomous-vehicle-tenets/.
---------------------------------------------------------------------------
 While the AV Tenets were first established in 2020, the approach 
remains relevant today as progress in advancing key safeguards to 
ensure safety and the purported societal benefits of AVs has not been 
met. For example, requiring that AVs meet minimum performance 
standards, including a ``vision test'' to ensure the vehicle can 
respond to all people, vehicles and objects in the roadway environment, 
is essential. According to the recent opinion poll commissioned by 
Advocates, the public strongly backs specific Federal safeguards. The 
poll found 61 percent believe their concerns about AVs and ACMVs would 
be addressed if companies had to meet minimum government safety 
requirements, and 76 percent support a ``vision test.'' \98\
---------------------------------------------------------------------------
 \98\ See: https://saferoads.org/2026-av-tech-truck-poll/
---------------------------------------------------------------------------
 In addition, AV operations must be subject to adequate oversight, 
including a comprehensive database accessible by vehicle identification 
number (VIN) with basic safety information. The AV Safety Data Act (S. 
3742), which has been referred to the Committee on Commerce, Science, 
and Transportation, would improve incident reporting for vehicles 
equipped with an ADS and should be advanced. Advocates' recent poll 
found that nearly 80 percent want to require AV manufacturers to report 
details of crashes that cause injury or property damage to the U.S. 
DOT.
 The Stay in Your Lane Act (S.3536), currently pending before the 
Committee on Commerce, Science, and Transportation, requires each 
manufacturer of an ADS to submit a declaration to NHTSA that details 
the conditions or the operational design domain (ODD) under which the 
ADS is designed to function safely.\99\ According to Advocates' opinion 
poll. 74 percent of respondents support requiring AV manufacturers to 
disclose the conditions in which their driverless vehicles can safely 
operate and ensure the vehicles do not operate outside those 
limits.\100\ We urge that this vital legislation be advanced.
---------------------------------------------------------------------------
 \99\ The Stay in Your Lane Act, S. 3536, 119 Cong. Sec. 1 (2025).
 \100\ Id.
---------------------------------------------------------------------------
 Similarly, it is imperative that ACMVs be subject to comprehensive 
safety regulations, including having a driver with a commercial driver 
license (CDL) and any relevant current or new accreditations behind the 
wheel for the foreseeable future. The interest in expanding the use of 
this technology must not be used as a pretext to eviscerate essential 
safety regulations administered by the Federal Motor Carrier Safety 
Administration (FMCSA), and particularly in the absence of new 
standards to ensure the technology performs safely and as needed. The 
public safety protections provided by the Federal Motor Carrier Safety 
Regulations (FMCSRs) have become no less important or applicable simply 
because a CMV has been equipped with an ADS. In fact, there are 
additional substantial public safety concerns presented by ACMVs.
 Lastly, remote drivers and remote assistants for AVs and ACMVs will 
undoubtedly face unique challenges in giving instruction or operating a 
vehicle compared to a driver located in the vehicle. For instance, a 
human driver behind the wheel may have access to a broader range of 
details regarding the driving environment than someone located in a 
sterile office far from the actual location of the AV or ACMV. In fact, 
during the Committee's February 4, 2026 hearing, Waymo revealed it had 
remote personnel in the Philippines.\101\ Individuals in these roles 
must be given specific training for remote operations or assistance. In 
addition, these individuals should have significant experience 
operating both a motor vehicle or CMV on public roads and remote 
operation of AVs or ACMVs in realistic training scenarios. Moreover, 
remote operators or assistants must never be in a situation where they 
would even potentially have to oversee the ``real time'' operation of 
more than one AV or ACMV. According to Advocates' recent opinion poll, 
79 percent of respondents agree there should be safety standards for 
remote personnel who provide guidance to driverless vehicles.\102\ It 
is essential that Congress address these remote personnel issues and 
require minimum standards in any AV or ACMV legislation.
---------------------------------------------------------------------------
 \101\ Hit the Road, Mac: The Future of Self-Driving Cars: Hearing 
before the Senate Committee on Commerce, Science, and Transportation, 
119 Cong. (Feb. 4, 2026).
 \102\ See: https://saferoads.org/2026-av-tech-truck-poll/
---------------------------------------------------------------------------
Conclusion
 Our Nation can and must do more to address the deadly and dangerous 
public health crisis on our roadways. Numerous pieces of legislation 
and additional proven solutions to advance safety, which have been 
mentioned in this letter, should be included in the next surface 
transportation reauthorization bill. Additionally, it is essential that 
proper protections, minimum safety standards, comprehensive data 
collection and thorough oversight of AVs and ACMVs be advanced to 
ensure the myriad of promises offered by their proponents are realized.
 Thank you for your consideration of these issues. We look forward 
to working with you to decrease motor vehicle and CMV crashes, save 
lives, reduce injuries and lessen associated costs.
 Sincerely,
 Catherine Chase,
 President.

cc: Members of the Subcommittee on Surface Transportation, Freight, 
Pipelines, and Safety

[GRAPHIC(S) NOT AVAILABLE IN TIFF FORMAT] 

 Transport Workers Union of America
 June 9, 2026

Hon. Todd Young,
Chair,
Subcommittee on Surface Transportation, Freight, Pipelines, and Safety,
U.S. Senate Committee on Commerce, Science, and Transportation.
Hon. Gary Peters,
Ranking Member,
Subcommittee on Surface Transportation, Freight, Pipelines, and Safety,
U.S. Senate Committee on Commerce, Science, and Transportation.

Statement for the Record: Hearing on ``The Need for Speed: How 
 Technological Advances are driving Transportation 
 Innovation'', June 9, 2026

Dear Chair Young and Ranking Member Peters,

 On behalf of more than 165,000 members of the Transport Workers 
Union of America (TWU), I offer the below state for the record as part 
of the above hearing. TWU members include transit operators and 
mechanics, railroad car and brake inspectors, onboard service workers, 
bikeshare workers, and others whose economic and physical well-being 
are dependent on the successful implementation of new, pro-safety, pro-
worker technologies.
Workers must be involved to successfully implement new technologies
 Frontline transportation workers are the people ultimately 
responsible for executing safety standards. They are the individuals 
with the clearest view of what works in every transportation system and 
have the expertise needed to successfully transition to new 
technologies. These skills apply to both developing standards at DOT, 
where workers' voices should be proactively included in all advisory 
committees, and at individual employers, where workers should have a 
direct say on which technologies are implemented locally. This 
philosophy applies to every section of our comments below.
Enforceable Federal rules on autonomous vehicles are urgently needed
 Under our current regulatory structure, safety standards on 
autonomous vehicles (AVs) are in free fall. A patchwork of inadequate 
and dangerously lenient state laws is encouraging a race to the bottom, 
and a complacent Federal government has allowed far too many risks into 
the system. Several times a week, new videos become available of AVs 
driving through police cordons, freezing in the middle of fire fights, 
ignoring school bus stop signals, and engaging in other unsafe 
activities. As more AVs have been deployed, the situation has not 
gotten better, rather the dangers they pose have become more 
widespread. With no realistic minimum safety standard in place and with 
more AV developers entering the market as time goes on, it would be 
naive to expect any safety improvements across the system without 
Federal intervention.
 Establishing a Federal safety standard, enforced by each of the 
appropriate modal agencies at the Department of Transportation, will 
ensure that AVs meet our safety expectations before they are deployed 
onto our streets. It is long past time that the Federal government 
acknowledge its responsibility for these vehicles in the same manner it 
does for traditional cars, trucks, and buses.
 While much of the public conversation around AVs has centered 
around robotaxis, development of autonomous trucking and buses has 
continued at the same pace. New deployments of these vehicles in Texas, 
Florida, and elsewhere emphasize the urgent need to set minimum, 
Federal standards for large freight and passenger vehicles. Commercial 
vehicle operations are governed by a combination of FMCSA, FTA, and 
state level rules. While NHTSA's role overseeing the manufacture of 
these vehicles is also essential to establishing safety standards, any 
rule siloed within NHTSA's authority will have a limited effect on AV 
safety. Additionally, as we have seen in other industries, financial 
resources flow towards the least regulated market. Any Federal AV 
framework limited to personal vehicles will redirect investment towards 
commercial vehicles, increasing the dangers of these larger, more 
complex operations.
 Today's workers in public transportation, motorcoach, trucking, and 
other commercial vehicle operations are highly qualified professionals. 
These professions are licensed under Federal guidelines, subject to 
Federal drug & alcohol testing, and must continually meet the highest 
safety standards to maintain their jobs. The most essential component 
of transportation safety is well-trained, qualified workers 
professionally conducting their duties. AVs, just like every other 
piece of equipment, will malfunction. The hardware and the software of 
these vehicles will break down. When this happens, humans must have the 
ability to intervene to prevent disaster.
 These are not theoretical concerns in our transportation systems. 
In two crashes in 2019 and 2020, automated systems on the Boeing 737-
MAX aircraft overrode human commands after failing to correctly respond 
to the environment, crashing at full speed and killing 346 people. In 
2009, 9 people were killed, including the operator, on the Washington, 
DC Metro's Red Line when the positive train control system ignored the 
operator's command to brake and accelerated into a parked train just 
north of the U.S. Capitol. In both instances, had humans been allowed 
to intervene the crashes would have been avoided.
 In addition to the obvious safety benefits of allowing human 
oversight and intervention in automated systems, AV developers must 
face a practical matter that many commercial vehicles will continue to 
require humans onboard even if they are not expected to operate their 
vehicle. Public transportation systems are obligated to provide 
services for the disabled community. Tour bus operators and other 
service companies may continue to want humans present to provide the 
services they do today for paying customers. In these cases, 
disallowing workers from accessing the controls to these vehicles would 
effectively hold them hostage at their job sites. These workers would 
be trapped, entirely at the mercy of their employer and the competency 
of the automated system. It seems obvious that such situations should 
be prohibited.
 The TWU does not believe that all vehicles must forever utilize the 
same methods of control present on our current fleets. We believe that 
equipment will change as safety improvements are developed. Certified 
operators will be able to work with any system to safely navigate our 
roads, provided the technology enables them to oversee and intervene as 
the workers deem necessary.
Rail technologies require the same scrutiny as other modes
 Class 1 railroads are required to have railcars and brakes 
inspected by a qualified person prior to departure. The FRA has 
recently allowed these inspections, under limited circumstances, to be 
conducted using an ``inspection portal''--a series of well-positioned 
cameras networked together and operated by an artificial intelligence 
program. The program analyzes the images to assess brake conditions, 
freight car alignment, spacing between cars, and over a hundred other 
factors that have historically been tested by humans. The TWU has 
endorsed the use of these portals provided that FRA certified car and 
brake inspectors 1) participate in the development of the technology 
and 2) review and approve the results of each inspection. The TWU 
supports pro-safety and pro-worker technology like these portals.
 In fact, technological solutions like this emphasize the need for 
human oversight. The brake inspection portal enables immediate review 
of rolling stock by qualified individuals while allowing compliant 
trains to move without interruption. This approach stands in stark 
contrast to a recent proposal from the FRA (known as the ``Brakes III'' 
rulemaking), which would simply extend the amount of miles traveled in 
between required inspections. The Brakes III approach is effectively 
the Federal government closing it's eyes and pretending problems it 
doesn't see don't exist. Especially given that technological options 
like the brake inspection portal exist, options that empower workers 
and increase safety, it is deeply concerning that the FRA would 
consider this kind of non-standard.
 Additionally, we are deeply concerned about the potential for 
autonomous train operations. In 2024 Georgia Central Railway and Heart 
of Georgia Railroad asked the FRA to exempt one line from several 
safety requirements so the railroad could demonstrate autonomous rail 
technology manufactured by Parallel Systems. The TWU opposed this 
petition because it eliminated human oversight across the entire line, 
including essential pre-trip railcar and break inspections. The TWU has 
a history of supporting technological transitions, provided these 
technologies demonstrate their ability to increase safety and create 
good jobs in the U.S. To date, Autonomous Rail developers are failing 
on both of these measures as they demand broad exemptions from FRA 
regulations while cutting the rail workforce.
FRA does not currently have the necessary authorities and practices to 
 successfully implement performance-based regulations
 Performance-based regulation, when implemented properly, is not 
just a buzz word. Allowing regulated entities to demonstrate compliance 
with safety goals, rather than solely safety processes can deliver 
positive results when the regulator has the necessary tools to oversee 
those goals. The FRA, today, does not have either the authority or the 
capacity to oversee such a system.
 Aviation is the example proponents usually reach for as the FAA 
pairs performance targets with layers of independent verification, 
mandatory incident reporting systems that are shielded from enforcement 
retaliation, and a safety culture that was built over decades of 
prescriptive regulation that remains in place underneath. Even in 
aviation, performance-based approaches supplement prescriptive rules--
they do not replace them. The freight rail industry has none of those 
conditions. It is dominated by a handful of Class I carriers that 
control the infrastructure, the equipment, the operations, and--
critically--the data.
 There is no independent third-party verification of carrier safety 
models. The FRA's inspection force is a fraction of what would be 
needed to audit the kind of self-compliance frameworks that 
performance-based regulation invites. And the consequences of failure 
are not confined to the regulated entity--a derailment involving 
hazardous materials threatens entire communities that have no voice in 
the carrier's internal risk model and no ability to evacuate on the 
timeline a chemical release demands.
 If Congress believes the FRA should transition towards more 
performance based rules, we believe the building blocks around these 
rules ought to be in place first. Empowering the FRA to independently 
collect and verify railroad safety data, removing railroads' ability to 
obfuscate or deny safety requests, and bolstering the powers of Federal 
rail inspectors are all immediate policy changes that would begin 
setting up the agency for a more goal-oriented approach.
Digital infrastructure should expand job opportunities under existing 
 Federal protections
 Federal investment in infrastructure comes with a number of 
essential protections to ensure funds are not undermining local labor 
or safety standards. These requirements have been an integral part of 
our Federal programs since their inception. Digital tools must be 
subject to the same requirements and expectations to ensure 
infrastructure dollars are creating and sustaining good jobs across the 
country.
 Digital infrastructure tools will also come with their own, unique 
set of concerns. New methods of planning, evaluating, and overseeing 
infrastructure ought to be tested in their own right prior to 
widespread deployment. In cases where these new tools present novel 
environments or may otherwise create unanticipated issues, there may be 
a need for additional, clarifying statutes to ensure existing standards 
on the ground persist.
 The TWU believes digital infrastructure can be an important aspect 
of our Federal infrastructure program as long as it is used to increase 
jobs and safety.
 Thank you for organizing this hearing and for the opportunity to 
comment.
 Sincerely,
 John Samuelsen,
 International President.
CC: The Honorable Ted Cruz
The Honorable Maria Cantwell
 ______
 
 Transportation Communications Union (TCU/IAM)
 June 9, 2026

Hon. Ted Cruz,
Chairman,
Senate Committee on Commerce, Science, and Transportation,
United States Senate,
Washington, DC.
Hon. Maria Cantwell,
Ranking Member,
Senate Committee on Commerce, Science, and Transportation,
United States Senate,
Washington, DC.

Dear Chairman Cruz and Ranking Member Cantwell:

 As the National President of the Transportation Communications 
Union (TCU/IAM), I am submitting a statement for the record for the 
June 6, 2026 hearing, ``The Need for Speed: How Technological Advances 
are Driving Transportation Innovation'' held by the Senate Committee on 
Commerce, Science, and Transportation Subcommittee. I am submitting for 
the record the policy statement unanimously approved by the 39 
affiliated unions of the Transportation Trades Department, AFL-CIO on 
June 7, 2026, opposing the Federal Railroad Administration's proposed 
rule in Docket No. FRA-2019-0072, commonly referred to as ``Brakes 
III''.
 Sincerely,
 Matt Hollis,
 National President,
 Transportation Communications Union (TCU/IAM).
 ______
 
Transportation Labor Opposes the Brakes III Rulemaking and Calls on the 
 FRA to Withdraw Its Proposal to Weaken Railcar Inspection Standards
 Transportation labor strongly opposes the Federal Railroad 
Administration's (FRA) proposed rule in Docket No. FRA-2019-0072, 
commonly referred to as ``Brakes III,'' which would extend required 
freight car brake inspection intervals from every 1,500 miles to every 
2,500 miles for railroads that adopt an electronic air brake slip 
(eABS) system.\1\ If finalized, this rule would undermine the safety of 
the Nation's freight rail system.
---------------------------------------------------------------------------
 \1\ https://www.regulations.gov/document/FRA-2019-0072-0005
---------------------------------------------------------------------------
 Railroad Carmen, represented by the Brotherhood of Railway Carmen 
Division (BRC-TCU) and the Transport Workers Union (TWU), are the 
federally Qualified Mechanical Inspectors (QMIs) who perform hands-on 
inspections of freight cars at terminals and yards. Carmen physically 
examine brake systems, wheels, bearings, safety appliances, and other 
mechanical components to ensure equipment is safe and compliant with 
Federal regulations. They are the last line of defense between a 
defective freight car and the communities through which it travels.
 The most critical fact about Brakes III is what it does NOT 
require. In exchange for extending inspection intervals by 1,000 miles, 
the rule requires no technology that actually inspects brakes or 
detects defects--no sensors, no monitors, no automated systems. The 
only requirement is that railroads switch from a paper air brake slip 
to an electronic one: a paperwork format change. The eABS does not 
change the science behind brake system degradation and cannot detect 
the emerging defects that only a trained QMI Carman can identify 
through physical inspection.
 The impact extends far beyond brakes. Federal regulations under 49 
CFR Part 215, covering safety standards for wheels, bearings, and 
structural components, do not have their own mileage-based inspection 
requirement. The Part 232 brake inspection is the only regulatory 
trigger that puts the eyes of a qualified Carman on railcar. Extending 
that interval eliminates the only regular opportunity to inspect for 
the mechanical defects that cause approximately one third of all 
derailments--including defects like the wheel bearing that failed at 
East Palestine, Ohio.
 Real-world data confirms QMI Carmen are irreplaceable. BNSF's Brake 
Health Effectiveness (BHE) test waiver trains are one of only two 
active programs operating at extended intervals--but critically, the 
BHE waiver for BNSF requires the railroad to install and maintain wheel 
temperature detector networks along the route, with data forwarded to 
QMI Carmen to better-improve their inspections and repair efforts. Even 
under these conditions--with detector infrastructure and Carmen still 
in the loop--the data shows that QMI Carmen find nearly eight times 
more brake defects than the automated systems alone (5,027 findings 
versus 654), and that is just for brakes, which cover only 10 percent 
of items inspected under Sections 215, 231, and 232.
 Brakes III, by contrast, would require none of this. No detectors, 
no detector data forwarding to Carmen, no safety infrastructure of any 
kind--just a paperwork change. If the results are this concerning under 
a waiver that actually requires technology and Carmen involvement, 
extending these intervals to all freight trains with no requirements 
whatsoever is unconscionable and reckless.
 At 2,500 miles, trains could travel coast to coast without a single 
hands-on inspection, enabling railroads to eliminate Carmen positions 
across the heartland of the country and jeopardize the safety and 
security of countless communities. Rail labor stands in unison 
vehemently opposing the adoption of this rule because--unsurprisingly--
locomotive engineers and conductors have significant and justified 
safety concerns when asked to operate trains in Ohio that were last 
inspected in Los Angeles.
 We therefore call on the FRA to take no further action on the 
Brakes III rule. Technology should assist QMI Carmen to improve rail 
safety and prevent derailments. To do otherwise is a disservice to the 
communities that host railroad tracks and the workers who keep those 
railroads safe. 

 Policy Statement No. S26-06 
 
 *ADOPTED 6.7.26*
 ______
 
 Research Article

Cost-benefit analysis of side underride guards for new semitrailers in 
 the United States

 Eric Hein\1\,*
---------------------------------------------------------------------------

 \1\ Institute for Safer Trucking, United States of America
 \*\ Corresponding author: [email protected]
---------------------------------------------------------------------------
 Abstract: In the United States, the severe consequences of side 
underride crashes are well documented, yet no Federal regulation 
requires side underride guards on semitrailers. Side underride guards 
can prevent vehicle underride and protect cyclists and pedestrians. 
This paper develops a decision support framework using a cost-benefit 
analysis to evaluate a potential Federal requirement for side underride 
guards on new semitrailers.
 Annually, side underride crashes result in an estimated 300 
fatalities and 400 serious injuries, costing society $7.4 billion. To 
estimate how side guards could reduce these losses, the analysis models 
paired full-fleet reductions of 50/50, 100/100, and 150/150 (fatalities 
and serious injuries), then scales impacts to one annual production 
cohort of 221,000 new semitrailers. Present value is calculated over 
the 13.2-year service life at a 2 percent discount rate using costs of 
$1,500, $2,500, and $4,500 per semitrailer, and includes fuel economy 
adjustments from weight and, where applicable, integration with 
aerodynamic skirts.
 Present value net benefits range from $0.137 billion to $2.8 
billion. Scenarios that included fuel-saving skirts yielded additional 
savings of approximately 500 gallons per semitrailer annually (5.2 
metric tons of CO2), adding $4.9 billion in fuel and $3.3 
billion in CO2 benefits.
 Monte Carlo simulations for the $2,500 guard plus skirt 
configuration estimated mean present value net benefits of $0.58 
billion ($0.39 to $0.77 billion) for the 50/50 case, $1.71 billion 
($1.35 to $2.11 billion) for the 100/100 case, and $2.84 billion ($2.30 
to $3.45 billion) for the 150/150 case. Modeled net benefits were 
positive in all iterations.
 Results indicate that a Federal requirement for side underride 
guards on new semitrailers would produce positive economic and safety 
effects and meet conditions identified by NHTSA and industry for side 
underride guard rulemaking. The analysis can be applied in other 
jurisdictions using local crash, cost, and fleet data.
 One sentence summary: This cost-benefit analysis evaluates a 
potential Federal requirement for side underride guards on new U.S. 
semitrailers, estimates positive safety and economic benefits, and 
presents a framework that can be applied in other jurisdictions.
 Keywords: Aerodynamic side skirt, Cost-benefit analysis, Federal 
safety standard, Regulatory analysis, Semitrailer, Side underride guard
 Publishing history: Submitted: 21 November 2025; Revised: 13 
February 2026, 5 March 2026; Accepted: 5 March 2026; Published: 15 May 
2026
 Cite as: Hein, E. (2026). Cost-benefit analysis of side underride 
guards for new semitrailers in the United States. Journal of Progress 
in Safety and Security, 2. https://doi.org/10.59490/pss.2.2026.8512
 ______
 
1 Introduction
 In 1967, actress Jayne Mansfield was killed in a rear underride 
crash when her car collided with, and slid beneath, the rear of a 
semitrailer. In response, the Federal Highway Administration proposed a 
regulation requiring rear underride guards on semitrailers to prevent 
passenger vehicles from underriding, and indicated that a similar 
requirement for side underride protection would soon follow (Federal 
Highway Administration, 1969). The National Highway Traffic Safety 
Administration (NHTSA) was created in 1970 and assumed rulemaking 
responsibility for the U.S. Department of Transportation (USDOT). In 
1971, under pressure from the trucking industry, NHTSA formally 
withdrew the proposed rule for rear underride guards (Morris, 1971; 
National Highway Traffic Safety Administration, 1971; Truck Trailer 
Manufacturers Association, 1969). A Federal safety standard requiring 
rear underride guards on semitrailers was not finalized until 1996, 
with a 1998 effective date, yet Federal regulators have never proposed 
side underride guards (Advisory Committee on Underride Protection, 
2024; National Highway Traffic Safety Administration, 1996; Thompson et 
al., 2023a; Thompson et al., 2023b).
 Side underride crashes occur when a passenger vehicle collides with 
the side of a semitrailer and slides beneath it. Due to the height 
mismatch, the passenger vehicle's crumple zones and airbags often fail 
to engage, frequently resulting in death or severe injuries to the 
occupants (Government Accountability Office, 2019; Insurance Institute 
for Highway Safety, 2023a; Mattos et al., 2021; National Highway 
Traffic Safety Administration, 2018a; Thompson, et al., 2023a; Thompson 
et al., 2023b). These crashes bypass the vehicle's primary safety 
features because the point of impact is often the windshield rather 
than the front bumper, causing the passenger compartment to be 
frequently crushed when it contacts the semitrailer (Government 
Accountability Office, 2019; Mattos et al., 2021; National Highway 
Traffic Safety Administration, 2018a). Approximately 200 passenger 
vehicle occupants die each year from side underride crashes with 
semitrailers (Braver et al., 1997; Brumbelow, 2012; Hein, 2025; 
Insurance Institute for Highway Safety, 2017c, 2023a; National 
Transportation Safety Board, 2014; Padmanaban, 2013). In 1977, the 
Highway Safety Research Institute at the University of Michigan 
(Minahan & J. O'Day, 1977) estimated that 195 side underride fatalities 
occurred each year. Simply put, over the last 45 years the annual 
number of fatalities from passenger vehicle side underride crashes with 
semitrailers has remained essentially unchanged. Over the last 50 
years, this public health burden has resulted in nearly 9,000 
fatalities (Hein, 2025).
 Vulnerable road users (VRUs), including pedestrians, bicyclists, 
and motorcyclists, are also at risk of traveling under, and being 
crushed and killed or seriously injured by semitrailers that lack side 
guards (Epstein, 2022; Insurance Institute for Highway Safety, 2023a). 
Between 2019 and 2021, an average of 99 pedestrian fatalities, 22 
bicyclist fatalities, and 187 motorcyclist fatalities occurred each 
year in crashes where the initial point of impact was the side of a 
large commercial truck (National Highway Traffic Safety Administration, 
2025b). Of these, there are an estimated 100 VRU side underride crash 
fatalities annually (Epstein, 2022; Insurance Institute for Highway 
Safety, 2023a; National Highway Traffic Safety Administration, 2025b; 
National Transportation Safety Board, 2013).
 While side underride guards are specifically intended to prevent 
passenger vehicles from sliding beneath a semitrailer, the addition of 
an aerodynamic side skirt could further mitigate fatalities and serious 
injuries among VRUs by reducing, and in some configurations blocking, 
the space beneath the semitrailer (Badgley et al., 2020; Epstein, 2022; 
Epstein et al., 2014; Insurance Institute for Highway Safety, 2023a; 
Kiefer, 2023c; Kwan et al., 2019; Mehrotra & Thompson, 2023; Volpe, 
2021). For example, in Mexico, semitrailers are required to install 
pedestrian guards, which can be a slightly modified aerodynamic side 
skirt (Advisory Committee on Underride Protection, 2024; Hightman, 
2024, 38:48). Additionally, in 1996 Strick designed a similar side 
guard for pedestrians, cyclists, and motorcyclists for use on 
semitrailers that were exported to Europe (Strick Trailers, LLC, 2022). 
By integrating side underride guards with aerodynamic skirts (Utility 
Trailer Manufacturing Company, 2024b; Wilson, 2017), the system can 
also reduce aerodynamic drag to save fuel, one of the largest operating 
costs in long-haul trucking (Galipeau-Belair, 2014; Galipeau-Belair et 
al., 2014; North American Council for Freight Efficiency, 2020).
 This study develops a decision support framework and applies it in 
a cost-benefit analysis of a potential Federal safety standard 
requiring side underride guards on new U.S. semitrailers. By 
substituting jurisdiction-specific crash, cost, and fleet data, the 
framework can be replicated and adapted to inform regulatory decision-
making.
2 Background
 Side underride guards, usually constructed from steel frames or 
cable/nylon webbing, are affixed to the sides of semitrailers (Airflow 
Deflector, 2024; Collision Safety Consulting, 2021; Utility Trailer 
Manufacturing Company, 2024b; Wilson, 2017). Functionally, side guards 
can help engage passenger-vehicle safety features (Mattos et al., 2021) 
and can shield passenger vehicles and VRUs from traveling beneath a 
semitrailer (Badgley et al., 2020; Epstein, 2022; Epstein et al., 2014; 
Insurance Institute for Highway Safety, 2023a; Kiefer, 2023c; Kwan et 
al., 2019; Mehrotra & Thompson, 2023; Volpe, 2021). Research, crash 
tests, and simulations consistently demonstrate that side underride 
guards can prevent or substantially limit passenger vehicles from 
underriding semitrailers, a critical factor in reducing fatalities and 
serious injuries (Brumbelow, 2012; Insurance Institute for Highway 
Safety, 2017a, 2017b; Kiefer, 2023a, 2023b, 2023d; Kumar et al., 2009; 
Mattos et al., 2021; Moradi, 2012; Seven Hills Engineering LLC, 2018, 
2020; Utility Trailer Manufacturing Company, 2022b, 2023b, 2024b; 
Wilson, 2017).
 Most side underride crashes occur at impact speeds between 30 and 
50 mph (Bloch & Schmutzler, 1998; Minahan & J. O'Day, 1977). Crash 
tests and simulations at impact angles between 90 and 15 degrees 
indicate that side underride guards can attenuate at 35 to 40 mph 
crashes, with some simulations demonstrating protection up to 50 mph 
(Bodapati, 2006; Brumbelow, 2012; Castaneda et al., 2012; Galipeau-
Belair, 2014; Galipeau-Belair et al., 2014; Hernando, 2021; Insurance 
Institute for Highway Safety, 2017a, 2017b; Kiefer, 2023a, 2023d; Kumar 
et al., 2009; Mattos et al., 2021; Moradi, 2012; Seven Hills 
Engineering LLC, 2018; Utility Trailer Manufacturing Company, 2022b, 
2023b; Wilson, 2017).
 Nearly 80 percent of fatalities (966 of 1,415) from side underride 
crashes recorded in NHTSA's Fatality Analysis Reporting System between 
2007 and 2020 occurred on Interstates, U.S. Highways, or State Highways 
(Hein, 2024). On these roadways, passenger vehicles average 60.1 mph 
and combination trucks/semitrailers average 57.3 mph, a speed 
difference of 2.8 mph (National Highway Traffic Safety Administration, 
2018b). NHTSA and the National Center for Statistics and Analysis 
(NCSA) estimated that side underride guards would be 97 percent 
effective in reducing fatalities and 85 percent effective in reducing 
serious injuries (National Center for Statistics and Analysis, 2023; 
National Highway Traffic Safety Administration, 2023). Together, the 
roadway context and these estimates provide a useful benchmark for the 
effectiveness assumptions used in the modeled scenarios.
 Most major U.S. semitrailer manufacturers hold side underride guard 
patents (Great Dane LLC, 2021; Jaworski & Montiel Rosales, 2024; 
Utility Trailer Manufacturing Company, 2023a; Vanguard National Trailer 
Corporation, 2019; Giromini et al., 2012; Ehrlich et al., 2020; Kunkel 
et al., 2021). The industry has also drafted guidance addressing 
design, testing, and performance considerations for side underride 
guards (Stoughton, 2022b; Strick Trailers, LLC, 2022; Truck Trailer 
Manufacturers Association, 2021). Several manufacturers have conducted 
crash tests of side underride guard designs (Insurance Institute for 
Highway Safety, 2017a, 2017b; Stoughton, 2020, 2022b; Utility Trailer 
Manufacturing Company, 2022b, 2023b, 2024b; Wilson, 2017). One 
manufacturer has factory-installed side underride guards on nearly 70 
semitrailers, with sufficient ground clearance to prevent high-
centering (Advisory Committee on Underride Protection, 2024; Bennett, 
2023, 01:36:25; Utility Trailer Manufacturing Company, 2023a, 2024b). 
Side underride guards are also available as aftermarket safety options 
(Airflow Deflector, 2024; Collision Safety Consulting, 2021; Fortier, 
2025), including at least one designed to safeguard VRUs (Fortier, 
2019, 2025). In addition, one commercially deployed design (Angelwing) 
has logged more than 1 million road miles without compromising 
semitrailer integrity or operational performance (Airflow Deflector, 
2024).
 Prior research documents crash mechanics and side guard 
effectiveness, yet it does not provide a regulatory cost-benefit 
framework that integrates safety performance, injury valuation, fuel 
effects, and annual semitrailer production, nor does it report explicit 
injury-based break-even thresholds for side underride guard adoption.
2.1 Institutional resistance and regulatory failure
 The NHTSA Administrator has statutory authority under the National 
Traffic and Motor Vehicle Safety Act of 1966, as amended, to issue and 
enforce motor vehicle safety standards that reduce crashes, fatalities, 
and injuries (49 U.S. Code Sec. 30101; 49 CFR 1.95). NHTSA's mission is 
to save lives, prevent injuries, and reduce economic costs due to road 
traffic crashes (National Highway Traffic Safety Administration, 
2025c). Nevertheless, NHTSA has not advanced any rulemaking on side 
underride protection (Advisory Committee on Underride Protection, 2024; 
Mehrotra & Thompson, 2023; Thompson et al., 2023a; Thompson et al., 
2023b), which is inconsistent with its statutory authority and safety 
mission. In addition, NHTSA has not acted on a recent congressional 
report (Advisory Committee on Underride Protection, 2024), including 
crash test data (Galipeau-Belair, 2014; Hernando, 2021; Hyundai 
Translead, 2022; Insurance Institute for Highway Safety, 2017a, 2017b; 
Kiefer, 2023a, 2023b, 2023c, 2023d; Mattos et al., 2021; Moradi, 2012; 
National Highway Traffic Safety Administration, 2018a; Seven Hills 
Engineering LLC, 2018; Stoughton, 2020, 2022b; Thompson et al., 2023a, 
2023b; Utility Trailer Manufacturing Company, 2022a, 2022b, 2023b, 
2024b; Wilson, 2017), decades of research (Hein, 2023b; Mattos et al., 
2021), and recommendations from the National Transportation Safety 
Board (National Transportation Safety Board, 1971, 2014, 2023), as well 
as denied or delayed administrative petitions (National Highway Traffic 
Safety Administration, 1979, 2014, 2022a, 2025a).
 Even when Congress mandated that NHTSA assess the feasibility, 
benefits, and costs of side underride guards on newly-manufactured 
semitrailers (Infrastructure Investment and Jobs Act, Pub. L. No. 117-
58, 135 Stat. 429, 2021), the resulting published Advanced Notice of 
Proposed Rulemaking (ANPRM) (National Center for Statistics and 
Analysis, 2023; National Highway Traffic Safety Administration, 2023) 
was widely criticized for methodological flaws, including the exclusion 
of safety benefits for VRUs (Braver 2023; Chicago Department of 
Transportation, 2023; City of Boston Transportation Cabinet, 2023; 
Consumer Reports, 2023; Hein, 2023a; Institute for Safer Trucking & 
Road Safe America, 2023; Insurance Institute for Highway Safety, 2023a, 
2023b, 2024; National Association of Mutual Insurance Companies, 2023; 
National Transportation Safety Board, 2023; Seven Hills Engineering 
LLC, 2023; Truck Safety Coalition et al., 2023). Furthermore, an ANPRM 
is not a proposed rule or final rule under the Administrative Procedure 
Act, but a discretionary Federal Register notice used to solicit 
information for possible future rulemaking (U.S. Department of 
Transportation, 2022). NHTSA has not prioritized side underride guards, 
and its review of public comments on the ANPRM remains incomplete more 
than three years after publication (Office of Management and Budget, 
2025).
 In the ANPRM, NHTSA did not address the Truck Trailer Manufacturers 
Association's draft Recommended Practice, submitted to the agency by 
semitrailer manufacturers (Stoughton, 2022b; Strick Trailers, LLC, 
2022; Truck Trailer Manufacturers Association, 2021). The cost-benefit 
analysis (National Center for Statistics and Analysis, 2023) also 
omitted relevant data from Utility Trailer Manufacturing Company, the 
only major semitrailer manufacturer publicly offering side underride 
guards (Utility Trailer Manufacturing Company, 2022a, 2022b, 2023b, 
2024b). Furthermore, the NCSA analysis (National Center for Statistics 
and Analysis, 2023) inflated annual semitrailer production by nearly 20 
percent (Trailer Body Builders, 2021, 2023, 2025) and utilized the 
obsolete 2020 Value of a Statistical Life (VSL), rather than the 
contemporaneous 2023 VSL (U.S. Department of Transportation, 2025). 
Collectively, these choices in the NCSA cost-benefit analysis distorted 
the results and substantially underestimated the annual economic 
benefits of side underride protection.
 Perhaps most concerning, neither NHTSA's ANPRM (National Highway 
Traffic Safety Administration, 2023) nor the NCSA's cost-benefit 
analysis (National Center for Statistics and Analysis, 2023) underwent 
peer review as required by the Office of Management and Budget (Office 
of Management and Budget, 2005, 2023). The analyses also failed to 
comply with a Presidential Memorandum directing agencies to use the 
best available science and data for policy decisions (Executive Office 
of the President, 2021), and disregarded the USDOT's recent scientific 
integrity policy (U.S. Department of Transportation, 2024a). Peer 
review serves as a critical check on agency assumptions and helps 
ensure policy decisions are evidence-based. Failure to follow these 
published procedures raises serious concerns about the objectivity of 
the regulatory and cost-benefit analyses.
 NHTSA's failure to follow established USDOT directives on 
scientific integrity (U.S. Department of Transportation, 2024a) is 
compounded by a persistent pattern of unsupported conclusions that side 
underride guards would be too costly. For example, in a regulatory 
analysis concerning rear underride guards, NHTSA stated, without 
providing evidence, that side underride guards were ``not cost 
effective'' (National Highway Traffic Safety Administration, 1991). A 
2021 Freedom of Information Act request confirmed that the agency held 
no data, analysis, or records to support this assertion (National 
Highway Traffic Safety Administration, 2022b). Despite this, NCSA's 
cost-benefit analysis for the ANPRM claimed that ``a similar regulation 
(for side underride guards) had been considered in 1991 during the 
preliminary regulatory evaluation for rear underride guards; at that 
time side underride guards were found not to be cost-effective'' 
(National Center for Statistics and Analysis, 2023). This claim is not 
supported by the agency's record. NHTSA has never proposed a regulation 
for side underride guards (Advisory Committee on Underride Protection, 
2024), nor has it produced any records or documentation supporting the 
1991 assertion that side guards were ``not cost effective'' (National 
Highway Traffic Safety Administration, 1991, 2022b).
 In the absence of Federal regulations, the trucking industry has 
long demonstrated reluctance to adopt side underride guards for 
widespread deployment, typically citing costs and raising speculative 
claims of ``unintended consequences'' (Advisory Committee on Underride 
Protection, 2024; American Trucking Associations, 2019; Government 
Accountability Office, 2019; Mehrotra & Thompson, 2023; Owner-Operator 
Independent Drivers Association, 2025a, 2025b; Sievers, 2020; Thompson 
et al., 2023a, 2023b; Truck Trailer Manufacturers Association, 1969; 
Utility Trailer Manufacturing Company, 2022a). In fact, resistance can 
be traced back to a 1969 comment that was filed opposing possible side 
underride protection requirements (Truck Trailer Manufacturers 
Association, 1969). In the decades since, organized industry opposition 
to side underride guards has continued, with lobbying groups 
reiterating these objections in regulatory comments and Congressional 
testimony (Owner-Operator Independent Drivers Association, 2025a, 
2025b). Investigative reporting has shown that such lobbying directly 
shaped USDOT's regulatory decisions, including a rejection of side 
guard requirements after meetings with industry representatives 
(Mehrotra & Thompson, 2023; Thompson et al., 2023b). Without a Federal 
mandate, semitrailer manufacturers are uncertain about future 
regulatory standards and, as a result, are reluctant to move forward 
with these safety devices (Government Accountability Office, 2019).
 Information from industry sources on side guard effectiveness has 
not been consistent. For example, Utility Trailer Manufacturing Company 
characterized the results of the same crash test differently across 
venues. In 2022, Utility Trailer Manufacturing Company reported to 
NHTSA that in a crash test of its side impact guard in which only 30 
percent of the passenger vehicle's width overlapped the end of the 
guard, the ``instrumented dummy survived the impact'' (Utility Trailer 
Manufacturing Company, 2022a). In correspondence with a safety 
advocate, Utility Trailer Manufacturing Company described the results 
from the same crash test as ``Utility Trailer's SIG (side impact guard) 
prevented passenger-compartment intrusion without significant injury to 
the instrumented crash dummy'' (Utility Trailer Manufacturing Company, 
2022c). By contrast, Utility Trailer Manufacturing Company stated in 
the recent congressional report that the side impact guard from the 
same crash test ``dramatically failed to prevent passenger-compartment 
intrusion'' (Advisory Committee on Underride Protection, 2024). These 
outwardly contradictory descriptions of the same crash test illustrate 
how industry representatives can selectively frame performance 
depending on regulatory or political context, or by emphasizing 
different criteria (occupant survival versus compartment intrusion).
 NHTSA's own Advisory Committee on Underride Protection, a federally 
chartered body established by Congress under the Infrastructure 
Investment and Jobs Act (Infrastructure Investment and Jobs Act, Pub. 
L. No. 117-58, 135 Stat. 429, 2021), concluded in its congressional 
report that ``very little has changed regarding side underride guard 
advancements in the last 50 years, and no substantial progress has been 
made by USDOT to prevent these horrific crash fatalities and injuries'' 
(Advisory Committee on Underride Protection, 2024). This finding 
underscores decades of Federal regulatory inaction despite clear 
evidence of preventable harm.
 Accordingly, this study presents a comprehensive cost-benefit 
analysis of a prospective Federal rulemaking to require side underride 
guards on newly manufactured enclosed freight semitrailers, including 
dry vans and refrigerated models, in the United States.
3 Data and methodology
3.1 Vehicle population, cohort scaling, and service life assumptions
 In 2021, NHTSA's Office of Defects Investigation surveyed eight 
major U.S. semitrailer manufacturers. NHTSA concluded that these 
manufacturers represent nearly 100 percent of semitrailers that could 
be equipped with side underride guards, and it reported an in-service 
population of 2.45 million van (box) type semitrailers (National 
Highway Traffic Safety Administration, 2022a). This estimate is 
consistent with industry segment statistics indicating more than 2 
million dry van trailers in operation (ACT Research, 2026).
 The analysis scales full-fleet annual safety benefits to one annual 
production cohort of new semitrailers using the average annual U.S. 
production estimate of 221,000 units (Trailer Body Builders, 2021, 
2023, 2025). Safety effectiveness is defined as paired annual 
reductions of 50 (low), 100 (medium), or 150 (high) fatalities and 
serious injuries per year under full-fleet adoption. The annual new-
trailer cohort share is calculated as annual new production divided by 
the estimated in-service van-type semitrailer population, 221,000/
2,450,000 = 0.090204, or approximately 9.02 percent. Annual fatalities 
and serious injuries prevented for one year of new semitrailers are 
calculated as the cohort share multiplied by the assumed full-fleet 
annual safety benefits.
 This single cohort and scaling approach mirrors the method used in 
NHTSA's NCSA cost-benefit analysis of side impact guards (National 
Center for Statistics and Analysis, 2023). That analysis estimates 
mitigated fatalities and serious injuries under full-fleet adoption and 
scales the results to one year of new semitrailers using the new-
production share of the fleet.
 For lifetime impacts, the average semitrailer service life is 
estimated at 13.2 years (American Transportation Research Institute, 
2025). Semitrailers are assumed to be used at a constant rate until 
retirement, and side underride guards are assumed to maintain safety 
benefits over the full service life.
 The analysis converts annual benefits and annual operating cost 
effects using a lifetime present value adjustment factor (PVAF), 
defined as the sum of the annual discount factors over the 13.2-year 
service life with 2 percent discounting (PVAF = 11.5) (Office of 
Management and Budget, 2023). This present value approach does not 
model fleet turnover as older equipment is retired and replaced. It 
aligns with methodology that applies discounted lifetime impacts to 
calculate safety benefits and costs, including installation and any 
fuel adjustment effects, across the service life of semitrailers 
(National Center for Statistics and Analysis, 2023).
 The analysis systematically varies key parameters and reports 
results in a consistent format. This structured sensitivity framework 
evaluates defined combinations of assumptions, including paired impacts 
in fatalities and serious injuries prevented, alternative unit guard 
costs, and modeled fuel adjustment cases, and reports present value net 
benefits for each scenario. Parameter values are drawn from peer-
reviewed literature, Federal regulatory documents, and industry 
information. The analysis supports replication and updates as new data 
become available.
3.2 Baseline fatalities and serious injuries
 In the United States, side underride crashes are estimated to cause 
approximately 300 fatalities per year, including both vehicle occupants 
and VRUs (Braver et al., 1997, 1998; Brumbelow, 2012; Hein, 2025; 
Insurance Institute for Highway Safety, 2023a, 2023b, 2025; National 
Transportation Safety Board, 2013, 2014; Padmanaban, 2013). Serious 
injuries are estimated at approximately 400 per year (Braver et al., 
1997; National Center for Statistics and Analysis, 2023; National 
Highway Traffic Safety Administration, 2023; National Transportation 
Safety Board, 2013). The baseline for this analysis represents the 
current state of practice, in which there is no Federal regulatory 
standard requiring side underride guards on new semitrailers. Industry 
resistance to voluntary adoption of side underride guards (Government 
Accountability Office, 2019; Mehrotra & Thompson, 2023; Thompson et 
al., 2023a, 2023b) reinforces the assumption that crash rates are 
expected to remain largely unchanged in the absence of Federal 
regulation. The annual societal cost of these crashes is calculated 
using USDOT's $13.7 million VSL for fatalities (U.S. Department of 
Transportation, 2025) and FMCSA's $8.12 million valuation of Maximum 
Abbreviated Injury Scale Level 5 (MAIS5) for serious 
nonfatal injuries (Federal Motor Carrier Safety Administration, 2024).
3.3 Safety effectiveness of side underride guards
 Crash test evidence and published evaluations indicate that side 
underride guards are effective in preventing passenger vehicles and 
VRUs from traveling beneath semitrailers (Galipeau-Belair, 2014; 
Hernando, 2021; Hyundai Translead, 2022; Insurance Institute for 
Highway Safety, 2017a, 2017b; Kiefer, 2023a, 2023b, 2023c, 2023d; 
Mattos et al., 2021; Moradi, 2012; National Highway Traffic Safety 
Administration, 2018a; Rechnitzer, 1993; Seven Hills Engineering LLC, 
2018; Stoughton, 2020, 2022b; Mehrotra & Thompson, 2023; Utility 
Trailer Manufacturing Company, 2022a, 2022b, 2023b, 2024b; Wilson, 
2017). Side underride guards are expected to reduce fatalities and 
serious injuries, but the magnitude of these effects remains uncertain 
without widescale implementation.
 Safety effectiveness is defined as the annual number of fatalities 
and serious injuries prevented under full-fleet adoption, meaning the 
entire in-service van-type semitrailer fleet is equipped with side 
underride guards. To model a range of plausible outcomes, three safety-
effectiveness scenarios were evaluated, reflecting paired annual 
reductions of 50 (low), 100 (moderate), or 150 (high) fatalities and 
serious injuries (Brumbelow, 2012; Insurance Institute for Highway 
Safety, 2023a; National Center for Statistics and Analysis, 2023; 
National Highway Traffic Safety Administration, 2023). These full-fleet 
annual benefits are scaled to one annual production cohort of new 
semitrailers using the cohort share method described in Section 3.1.
3.4 Unit cost
 The analysis uses three unit-cost estimates for side underride 
guards, reflecting variation in manufacturing origin and aerodynamic 
skirt integration. The aerodynamic side skirt is included only in the 
integrated cost cases and is modeled strictly as a fuel-savings effect, 
not as a change in the safety-effectiveness scenarios. Because 
aerodynamic skirts are already used on some new semitrailers, the 
integrated configurations are modeled to avoid an added fuel penalty 
rather than attribute incremental net fuel savings attributable to a 
side underride guard requirement. Each unit cost represents 
installation of a full side guard system on a trailer, including guards 
on both sides. The unit-cost cases are: a $1,500 installation 
representing mass-produced OEM side underride guards without 
aerodynamic skirts; a $2,500 installation representing OEM integrated 
side guards with aerodynamic skirts; and a $4,500 installation 
representing aftermarket integrated side guards with aerodynamic skirts 
(Airflow Deflector, 2024; Epstein, 2022; Government Accountability 
Office, 2019; National Center for Statistics and Analysis, 2023; Seven 
Hills Engineering LLC, 2023; Strick Corporation, 2000).
3.5 Fuel economy
 Fuel consumption impacts associated with the additional weight of 
side underride guards were modeled using two configurations, a 500-
pound guard-only and a 1,000-pound integrated guard with an aerodynamic 
skirt (Airflow Deflector, 2024; National Center for Statistics and 
Analysis, 2023). The added weight was represented as a reduction in 
fuel economy of 0.25 percent and 0.5 percent, respectively, applied as 
a proportional increase in gallons of diesel used relative to baseline 
(North American Council for Freight Efficiency, 2019, 2020). For 
configurations that included aerodynamic skirts, a conservative 5 
percent improvement in fuel economy (North American Council for Freight 
Efficiency, 2020; Utility Trailer Manufacturing Company, 2024a) was 
applied as a proportional decrease in gallons of diesel used relative 
to baseline. In those integrated cases, the skirt effect is modeled to 
fully offset the weight-related increase in fuel consumption, resulting 
in no net fuel penalty. Because aerodynamic devices are already used on 
some new semitrailers, the skirt effect is treated as a configuration 
assumption in the integrated cases and is not intended to be attributed 
as incremental fuel savings caused by a Federal side underride guard 
requirement.
 The analysis used a baseline fuel economy of 7.4 mpg, an average 
combined truck and semitrailer weight of 63,000 pounds, an average 
annual mileage of 82,677 miles per semitrailer, and a diesel cost of 
$3.78 per gallon (American Transportation Research Institute, 2025; 
North American Council for Freight Efficiency, 2019, 2020; U.S. Energy 
Information Administration, 2025; Williams & D. Murray, 2020). 
Associated changes in CO2 emissions were calculated from the 
modeled change in annual diesel consumption, using 10.21 kg 
CO2 per gallon of diesel fuel (U.S. Environmental Protection 
Agency, 2025) and reported as metric tons of CO2 per year. 
The estimated reductions in CO2 emissions were valued using 
$250 per metric ton (U.S. Department of Transportation, 2024b).
 Results are reported as annual per-semitrailer impacts, then scaled 
and discounted using the cohort share and present value methods 
described in Section 3.1. The model assumes the same baseline miles 
driven and no change in how semitrailers are used or purchased, and 
does not model changes in trailer demand, freight demand, pricing, or 
consumer or producer surplus. The modeled fuel economy effects reflect 
side guard weight and, where applicable, the aerodynamic skirt, and are 
reported as changes in annual fuel costs and associated CO2 
emissions increases or reductions.
3.6 Analytical approach
 This analytical approach follows Federal regulatory impact guidance 
(Office of Management and Budget, 2023), aligns with methodological 
standards established by the USDOT (U.S. Department of Transportation, 
2024b), and mirrors the cost-benefit approach used in NHTSA's side 
underride ANPRM and NCSA cost-benefit analysis (National Center for 
Statistics and Analysis, 2023; National Highway Traffic Safety 
Administration, 2023). Benefits are monetized using USDOT's current VSL 
(U.S. Department of Transportation, 2025) and FMCSA's MAIS5 valuation 
for serious nonfatal injuries (Federal Motor Carrier Safety 
Administration, 2024). Benefits and costs were estimated and reported 
in U.S. dollars (National Center for Statistics and Analysis, 2023; 
U.S. Department of Transportation, 2024b). Present value net benefits 
were calculated as monetized safety benefits minus installation and 
operating costs (Table 1).

 Table 1. Formulas for present value benefits and costs, fuel economy
 adjustments, and break-even thresholds for a potential side underride
 guard standard.*
------------------------------------------------------------------------
 Equation Formula
------------------------------------------------------------------------
Annual Baseline Societal (Annual Number of Fatalities x VSL) +
 Cost (Annual Number
(Current State, No of Serious Injuries x MAIS5)
 Standard)
 
Cohort Share Annual Number of New Semitrailers
 Manufactured / In-Service Semitrailer
 Population
 
Annual Cohort Fatalities Full-Fleet Fatalities Prevented x Cohort
Prevented (Scaled) Share
 
Annual Cohort Serious Full-Fleet Serious Injuries Prevented x
 Injuries Cohort Share
Prevented (Scaled)
 
Lifetime Present Value (1 - (1 + Discount Rate)-(-service life in
 Adjustment years))
Factor (PVAF) / Discount Rate
 
Annual Cohort Safety (Annual Cohort Fatalities Prevented x VSL)
Benefits + (Annual Cohort Serious Injuries Prevented
 + MAIS5)
 
Present Value Safety Annual Cohort Safety Benefits x PVAF
 Benefits
 
Cohort Installation Cost Annual Number of New Semitrailers
 Manufactured x
 Unit Cost of Side Underride Guard (per
 Semitrailer)
 
Adjusted Fuel Economy Baseline mpg of a Loaded Combination Truck
 (mpg), and Semitrailer
Guard Weight Only (500 lb x (1 - Fuel Penalty Rate)
 or 1,000 lb)
 
Additional Gallons per (Baseline miles / Adjusted mpg) - (Baseline
 Semitrailer miles /
per Year Baseline mpg)
 
Annual Cohort Fuel Penalty Annual Number of New Semitrailers
 Cost Manufactured x
 Additional Gallons per Semitrailer per Year
 x Diesel Price
 
Present Value Fuel Penalty Annual Cohort Fuel Penalty Cost x PVAF
 Cost
 
Present Value Total Costs Cohort Installation Cost + Present Value
(Installation + Fuel Fuel Penalty Cost
 Penalty Cost)
 
Adjusted Fuel Economy (Baseline mpg x (1 - Fuel Penalty Rate)) /
 (mpg), (1 -
Guard Weight Plus Aerodynamic Fuel Savings Rate)
 Aerodynamic
Skirt Benefit (Integrated
 Case)
 
Break-Even Analysis (Net Present Value of Total Costs / ((VSL +
 Benefits MAIS5) x Cohort
= 0, Paired Fatalities and Share x PVAF)
 Serious Injuries)
------------------------------------------------------------------------
*A supplementary Excel workbook contains the calculations for Table 1.

3.7 Uncertainty analysis
 Uncertainty in present value net benefit estimates was quantified 
using Monte Carlo simulation, focusing on two sources: crash 
applicability and guard effectiveness. The probabilistic analysis is 
applied only to the $2,500 guard plus skirt configuration, which is 
treated as the implementation baseline, while the $1,500 and $4,500 
configurations are evaluated as deterministic alternative scenarios. 
Effectiveness is represented as paired annual lives saved and serious 
injuries prevented under three full-fleet cases (50/50, 100/100, and 
150/150).
 In this framework, overall safety effectiveness is represented as 
the product of crash applicability and guard effectiveness. Crash 
applicability represents uncertainty in the number of side underride 
crashes that a side guard could realistically affect, given the 
inclusion decisions for higher speed crashes, multi-vehicle collisions, 
and VRUs. For example, the impact speed data NHTSA used to determine 
which crashes to include in the side underride estimates are subject to 
substantial uncertainty (Government Accountability Office, 2019; 
National Highway Traffic Safety Administration, 2013, 2026). Despite 
research by NHTSA and others showing side underride guard effectiveness 
up to 50 mph (Bodapati, 2006; Galipeau-Belair, 2014; Mattos et al., 
2021; Moradi, 2012; National Highway Traffic Safety Administration, 
2018a), the ANPRM excluded side underride crashes above 40 mph, those 
involving more than one passenger vehicle, and all VRU crashes 
(National Center for Statistics and Analysis, 2023; National Highway 
Traffic Safety Administration, 2023). Guard effectiveness represents 
uncertainty in guard performance.
 Both components are modeled using triangular distributions with a 
mode of 1.0 and bounds of 15 percent. The side underride 
guard market remains immature, with only one manufacturer currently 
offering an OEM-installed system and only a small number of aftermarket 
offerings. As a result, real-world deployment and performance data 
remain limited, and triangular distributions were selected to provide a 
bounded, transparent representation of that uncertainty. The 
15 percent bounds were chosen because a 10 
percent range would likely understate the plausible variation, while a 
25 percent range would extend beyond what the current 
evidence base can support. The multipliers are used only to improve 
interpretability and are not intended to imply that crash applicability 
and guard effectiveness are separately estimated from data or that 
separating these components adds robustness relative to using a single 
overall effectiveness factor. In each simulation iteration, the same 
combined multiplier is applied to both lives saved and serious injuries 
prevented, so the two outcomes rise and fall together.
 Each iteration converts simulated full-fleet annual safety outcomes 
to cohort impacts using the cohort share method described in Section 
3.1. Monetized annual safety benefits are calculated by applying 
USDOT's VSL to fatalities prevented and FMCSA's MAIS5 
valuation to serious injuries prevented. Annual benefits are converted 
to lifetime present value using the same discount rate, service life, 
and PVAF applied in the base model. Present value net benefits in the 
Monte Carlo analysis are calculated as present value safety benefits 
minus the present value cost of the $2,500 guard plus skirt 
configuration. This configuration is used as the implementation 
baseline because it reflects an OEM guard and skirt package, avoids a 
fuel penalty, and provides a practical baseline for testing 
uncertainty. The analysis does not attribute incremental fuel savings 
to a Federal side underride guard requirement, because aerodynamic 
devices may already be present on new semitrailers or adopted 
independently of side guards. Simulation results are summarized using 
the simulated mean and the 2.5th and 97.5th percentiles (95 percent 
uncertainty interval). Retrofit and maintenance requirements are not 
modeled because the analysis focuses on OEM installation on new 
semitrailers, and empirical data on side guard maintenance and repair 
are sparse.
3.8 Break-even analysis
 A break-even benchmark was calculated to estimate the annual full-
fleet equivalent safety benefit required for monetized safety benefits 
to equal total costs in the lifetime present value model. The primary 
benchmark assumes paired impacts, the same number of fatalities 
prevented and serious injuries prevented. Total costs include side 
underride guard installation and, where applicable, the fuel 
consumption adjustment attributable to the added guard weight. Annual 
safety impacts are scaled and discounted using the cohort share and 
present value methods described in Section 3.1. This benchmark 
identifies the annual full-fleet equivalent safety impact that marks 
the threshold where net benefits equal zero (break-even). In addition, 
a fatalities-only break-even threshold was calculated by solving for 
the number of fatalities required for benefits to equal costs excluding 
serious injury benefits. Different combinations of fatalities and 
serious injuries prevented can produce the same break-even outcome (net 
benefits equal to zero) because the Value of a Statistical Life is 
about 1.7 times the MAIS5 valuation (Federal Motor Carrier 
Safety Administration, 2024; U.S. Department of Transportation, 2025).
 All calculations and the Monte Carlo implementation, including cell 
level formulas, are provided in supplementary Excel workbooks to 
support replication.
4 Results and Discussion
4.1 Economic analysis
 Annually, side underride crashes of passenger vehicles and VRUs 
into semitrailers that lack side underride guards result in an 
estimated 300 fatalities and 400 serious injuries, imposing an 
estimated baseline societal cost of $7.4 billion. This baseline 
reflects the status quo in the absence of Federal regulation and 
underscores the economic burden of regulatory inaction. Without 
quantifying these ongoing losses, the public and policymakers may 
misinterpret the ``No Action'' alternative as cost-neutral, distorting 
an accurate comparison of regulatory options.
 In all modeled cases, the present value net safety benefits of 
equipping new semitrailers\1\ with side underride guards exceed the 
associated costs (Table 2). Under the scenario of preventing 50 
fatalities and preventing 50 serious injuries annually, with a $1,500 
unit cost and a 500-pound fuel adjustment, the estimated present value 
net economic benefit is $0.531 billion (Table 2). Even under 
conservative assumptions, net benefits remain positive. For example, 
under the same safety scenario with a $4,500 integrated guard plus 
skirts unit cost, the estimated present value net economic benefit is 
$0.137 billion (Table 2). In the higher-effectiveness scenario of 
preventing 150 fatalities and preventing 150 serious injuries annually, 
with a $2,500 integrated guard plus skirts unit cost, the analysis 
yields an estimated present value net economic benefit of $2.8 billion 
(Table 2). Overall, these results indicate that a Federal regulatory 
standard requiring side underride guards is cost-effective under a 
broad range of modeled assumptions.
---------------------------------------------------------------------------
 \1\ For context, using representative purchase prices (e.g., 
Commercial Truck Trader, 2025) for a 53-foot dry-van semitrailer 
($45,000) and a 53-foot refrigerated semitrailer ($90,000), the modeled 
unit costs correspond to an incremental purchase cost of approximately 
3.3 percent, 5.6 percent, and 10.0 percent for a dry van and 1.7 
percent, 2.8 percent, and 5.0 percent for a refrigerated semitrailer.

 Table 2. Present value results for side underride guard scenarios by safety effectiveness and unit cost,
 including fuel and CO2 effects where applicable.\2\
----------------------------------------------------------------------------------------------------------------
 PV Fuel Cost PV Skirt Fuel
 Scenario PV Safety PV Installation Adjustment ($B) PV Net Economic Savings ($B)
 Benefits ($B) Costs ($B) (CO2, $B) Benefit ($B) (CO2, $B)
----------------------------------------------------------------------------------------------------------------
Prevent 50 Deaths $1.132 $0.332 $0.269 ($0.182) $0.531 N/A
 + 50 Serious
 Injuries, $1,500
 SUG only + 500
 lb Fuel Penalty
 
Prevent 50 Deaths $1.132 $0.553 N/A $0.579 $4.855 ($3.278)
 + 50 Serious
 Injuries, $2,500
 Integrated SUG +
 Skirts (No Net
 Fuel Penalty)
 
Prevent 50 Deaths $1.132 $0.995 N/A $0.137 $4.855 ($3.278)
 + 50 Serious
 Injuries, $4,500
 Integrated SUG +
 Skirts (No Net
 Fuel Penalty)
 
Prevent 100 $2.264 $0.332 $0.269 ($0.182) $1.663 N/A
 Deaths + 100
 Serious
 Injuries, $1,500
 SUG only + 500
 lb Fuel Penalty
 
Prevent 100 $2.264 $0.553 N/A $1.711 $4.855 ($3.278)
 Deaths + 100
 Serious
 Injuries, $2,500
 Integrated SUG +
 Skirts (No Net
 Fuel Penalty)
 
Prevent 100 $2.264 $0.995 N/A $1.269 $4.855 ($3.278)
 Deaths + 100
 Serious
 Injuries, $4,500
 Integrated SUG +
 Skirts (No Net
 Fuel Penalty)
 
Prevent 150 $3.396 $0.332 $0.269 ($0.182) $2.795 N/A
 Deaths + 150
 Serious
 Injuries, $1,500
 SUG only + 500
 lb Fuel Penalty
 
Prevent 150 $3.396 $0.553 N/A $2.843 $4.855 ($3.278)
 Deaths + 150
 Serious
 Injuries, $2,500
 Integrated SUG +
 Skirts (No Net
 Fuel Penalty)
 
Prevent 150 $3.396 $0.995 N/A $2.401 $4.855 ($3.278)
 Deaths + 150
 Serious
 Injuries, $4,500
 Integrated SUG +
 Skirts (No Net
 Fuel Penalty)
----------------------------------------------------------------------------------------------------------------
2 Note. PV = present value. Dollar values are reported in $ billions (B). Values in parentheses report the
 monetized CO2 change associated with the fuel change for transparency only and are not included in Present
 Value Net Economic Benefit. ``N/A'' indicates no fuel penalty is applied in the integrated guard plus skirts
 configurations. Fuel savings and CO2 values depend on skirt inclusion and are identical across safety-
 effectiveness scenarios.

4.2 Uncertainty analysis
 For the $2,500 guard plus skirts configuration, Monte Carlo 
simulations show that present value net benefits were positive in all 
iterations. Based on 10,000 simulations per case, mean present value 
net benefits were $0.58 billion (95 percent uncertainty interval, 2.5th 
to 97.5th percentiles: $0.39 billion to $0.77 billion), $1.71 billion 
($1.35 billion to $2.11 billion), and $2.84 billion ($2.30 billion to 
$3.45 billion) for the 50/50, 100/100, and 150/150 effectiveness cases, 
respectively.
4.3 Break-even threshold
 Break-even thresholds were modest relative to the modeled 
effectiveness cases. Under the paired benchmark, with equal annual 
reductions in fatalities and serious injuries, the break-even annual 
fleetwide equivalent threshold is approximately 27 for the $1,500 
guard-only case (including the 500 lb fuel adjustment), 24 for the 
$2,500 guard plus skirts case, and 44 for the $4,500 guard plus skirts 
case.\3\ Under the fatalities-only benchmark, which excludes serious 
injury benefits, the break-even annual fleetwide equivalent thresholds 
are approximately 42, 39, and 70 fatalities prevented for the $1,500, 
$2,500, and $4,500 cases, respectively.
---------------------------------------------------------------------------
 \3\ Calculations are available in the supplementary Excel workbook.
---------------------------------------------------------------------------
4.4 Fuel efficiency and operational cost
 Integrating aerodynamic skirts with side underride guards can yield 
substantial diesel fuel savings. Even with an added 1,000 lb 
configuration, a modest 5 percent improvement in fuel efficiency would 
raise average fuel economy to 7.75 miles per gallon and reduce diesel 
use by 505 gallons (5.2 metric tons of CO2) per semitrailer 
per year. Scaled to the average annual number of new semitrailers 
manufactured, this equals 111.7 million gallons (1.1 million metric 
tons of CO2) saved per year. At a diesel price of $3.78 per 
gallon, this corresponds to about $1,910 in annual fuel savings per 
semitrailer. Over the service life in the present value model, the 
associated fuel savings are about $4.9 billion, with about $3.3 billion 
in monetized CO2 benefits (Table 2).
 In contrast, the fuel adjustment associated with the added weight 
of side underride guards is comparatively minor. A 500 lb guard is 
estimated to increase fuel consumption by 28 gallons (0.29 metric tons 
of CO2) per semitrailer per year, or about $105 in added 
annual fuel cost, while a 1,000 lb configuration results in an 
additional 56 gallons (0.57 metric tons of CO2), or about 
$212 in added annual fuel cost. These penalties are far smaller than 
the potential aerodynamic benefits when side underride guards are 
combined with fuel-saving skirts.
4.5 Limitations
 Costs are borne primarily by fleet operators, since manufacturers 
would likely pass these expenses through to trailer pricing, while 
benefits accrue more broadly to society through reduced mortality and 
severe injury burden. Although the results support the economic 
feasibility of a Federal mandate for side underride guards on new 
semitrailers, regulatory rulemaking would still need to develop a 
performance standard, a compliance test method, an implementation 
timeline, and enforceable requirements that can be applied consistently 
across manufacturers and equipment configurations.
 Similar to the engineering improvements of rear underride guards 
(Stoughton, 2022a), a Federal regulatory standard requiring side 
underride guards would undoubtedly prompt the development of 
alternative designs and innovations in reducing the weight of side 
guards while maintaining or improving safety effectiveness. The weight 
of side underride guards was modeled using 500 lb and 1,000 lb; 
however, other braided cable, nylon webbing, or aluminum side guard 
designs are available (Fontaine Commercial Trailer Inc., 2021; Fortier, 
2019; Kiefer, 2018; Vanguard National Trailer Corporation, 2019; 
Giromini et al., 2012). In fact, NHTSA estimated that an effective side 
underride guard constructed of aluminum would weigh approximately 215 
pounds (National Highway Traffic Safety Administration, 2018a).
 Annual economic benefits should be considered minimum estimates 
because they do not incorporate additional benefits to the trucking 
industry including reduced legal liability (Manins, 2024; Sievers, 
2020), reductions in insurance premiums (Kwan et al., 2019), and less 
risk exposure for drivers including potential criminal consequences in 
severe crashes (Nespral, 2025; Walsh, 2021). These issues are all 
outside the scope of the present research.
5 Conclusion and recommendations
 This study applies the USDOT valuation framework and NCSA cohort-
scaling methods under transparent, testable assumptions to monetize the 
safety benefits of side underride guards and compare those benefits 
with compliance costs, informing the regulatory assessment of a 
potential Federal standard for new semitrailers.
 This approach is transferable to other contexts and countries for 
regulatory appraisal of side underride guards. Analysts can estimate 
benefits, costs, and break-even thresholds by substituting 
jurisdiction-specific inputs, including injury valuations, fleet 
production volumes, unit costs, and safety effectiveness. The structure 
also supports sensitivity testing to compare alternative parameter sets 
and to document the robustness of results for policy review.
 In every modeled scenario, preventing 50 to 150 fatalities and 
comparable numbers of serious injuries produces positive present value 
net economic benefits. Estimated net benefits range from $0.137 billion 
to $2.8 billion and consistently exceed the combined costs of side 
underride guard installation and the fuel penalty attributable to added 
weight. Successful crash tests, research, evaluations, and initial 
deployments, including Utility Trailer Manufacturing Company's 
integration of nearly 70 semitrailers and AngelWing's demonstrated 
durability, show that the technology is viable in practice. These data, 
together with NHTSA's statement that ``If the evidence gathered by the 
agency indicates that side underride rulemaking could contribute 
significantly to safety, the agency will commence rulemaking'' 
(National Highway Traffic Safety Administration, 1979) support moving 
forward with a Federal side underride guard standard. The Truck Trailer 
Manufacturers Association and Utility Trailer Manufacturing Company 
have stated that they would support side underride guards ``if they 
ever become economically justified and technologically feasible'' 
(Truck Trailer Manufacturers Association, 2023; Utility Trailer 
Manufacturing Company, 2022a). Collectively, the conditions identified 
by NHTSA, the Truck Trailer Manufacturers Association, and Utility 
Trailer Manufacturing Company have been met in the modeled cases 
presented in this study. These findings can also inform current 
legislative proposals in the United States concerning side underride 
protection requirements for new semitrailers (S. 3775, 119th Cong., 
2026; H.R. 7354, 119th Cong., 2026).
CRediT authorship contribution statement
 Eric Hein: Conceptualization, methodology, investigation, data 
curation, formal analysis, validation, writing of the original draft, 
review, and editing. The author has read and approved the final version 
of the manuscript.
Data availability
 The calculations supporting this article are provided in 
supplementary Excel workbooks available on the article landing page at 
the same DOI link as this paper. The workbooks include the calculations 
underlying Table 1, present value benefit and cost estimates, fuel 
economy adjustments, break-even thresholds, and the Monte Carlo 
simulation used to quantify uncertainty in present value net benefit 
estimates.
Use of AI
 The entire manuscript was developed by the author through original 
thinking, research, and writing. After drafting the manuscript, the 
author used ChatGPT only to help refine wording and improve clarity, 
and to cross-check calculations. The author takes full responsibility 
for the content of the published article.
Declaration of competing interests
 There are no conflicts of interest.
References
 ACT Research (n.d.) Trailer market demand & economic drivers in the 
U.S. https://www
.actresearch.net/resources/us-freight-sector/trailer-demand-and-
economic-activity
 Advisory Committee on Underride Protection. (2024). Biennial report 
to congress and the secretary of the advisory committee on underride 
protection. https://gsa-geo.my.salesforce.com/sfc/
p/t0000000Gyj0/a/3d000003BoqP/
CheZ62qtuZkvoirBzMr8CRKuWPwUiGcsyEJj35ggdog
 Airflow Deflector. (2024). Side underride guards for semi-trailers. 
https://airflowdeflector
.com/angelwing_underride-1/
 American Transportation Research Institute. (2025). An Analysis of 
the operational costs of trucking: 2025 update. https://
truckingresearch.org/ wp-content/uploads/2025/07/ATRI-Opera
tional-Costs-of-Trucking-07-2025.pdf
 American Trucking Associations. (2019). Testimony: Hearing on Under 
Pressure: The State of Trucking in America. https://www.trucking.org/
sites/default/files/2020-01/SpearWrittenTesti
monyHighwaysTransit61219Hearing.pdf
 Badgley, J., A. Breck, M. Dawes, A.K. Epstein, K. Welty, A. 
McNally, & S. Peirce. (2020). A Literature review of lateral protection 
devices on trucks intended for reducing pedestrian and cyclist 
fatalities. Department of Transportation. Federal Motor Carrier Safety 
Administration. https://rosap.ntl.bts.gov/view/dot/49250
 Bennett, J. (2023, May 25). NHTSA virtual meeting advisory 
committee on underride protection [Video]. Zoom https://
usdot.zoomgov.com/rec/play/BGqXUFeD4MpVacV6ZnClFiEN-kJd
PIRKrgMh3-
0roqieS_L6QfsWJtzW7QsgEkWEo9VbV1J32o2C24OC.JHWAkwyyUmDyMIOE?auto
play=true
 Bloch, B., and L. O. F. Schmutzler. (1998). Improved crashworthy 
designs for truck underride guards. 16th International Technical 
Conference on the Enhanced Safety of Vehicles, 98-S4-O-07. https://
sites.fem.unicamp.br/impact/conference.html
 Bodapati, V. K. K. (2006). Evaluation of energy absorbing pliers 
underride guards for rear and side of large trucks (Master's thesis, 
Wichita State University). http://hdl.handle.net/10057/617
 Braver, E.R., E.L Mitter, A.K. Lund, M.X. Cammisa, M.R. Powell, & 
N. Early. (1998). A photograph-based study of the incidence of fatal 
truck underride crashes in Indiana. Accident Analysis & Prevention, 
30(2), 235-243. https://doi.org/10.1016/S0001-4575(97)00079-1
 Braver, E.R., M.X. Cammisa, A.K. Lund, N. Early, E.L. Mitter, & 
M.R. Powell. (1997). Incidence of large truck-passenger vehicle 
underride crashes in fatal accident reporting system and national 
accident sampling system. Transportation Research Record Journal of the 
Transportation Research Board, 1595(1), 27-33. https://doi.org/10.3141/
1595-05
 Braver E.R. (2023, July 20). Comments: Side underride guards; 
advance notice of proposed rulemaking Regulations.gov. https://
www.regulations.gov/comment/NHTSA-2023-0012-2044
 Brumbelow, M. L. (2012). Potential benefits of underride guards in 
large truck side crashes. Traffic Injury Prevention, 13(6), 592-599. 
https://doi.org/10.1080/15389588.2012.666595
 Castaneda, R., Jones, W., Shattuck, M., Mills, D., et al., (2012). 
Trailer side underride crash testing: Relating collision damage to 
impact speed. SAE Technical Papers. https://doi.org/10.4271/2012-01-
0614
 Chicago Department of Transportation. (2023). Comments on the 
advanced notice of proposed rulemaking side underride guards on 
trailers and semitrailers. Docket No. NHTSA-2023-0012. https://
downloads.regulations.gov/NHTSA-2023-0012-2041/attachment_1.pdf
 City of Boston Transportation Cabinet. (2023). Comments on Advanced 
Notice of Proposed Rulemaking for Side Underride Guards NHTSA-2023-
0012-0003. https://downloads.regu
lations.gov/NHTSA-2023-0012-2042/attachment_1.pdf
 Collision Safety Consulting. (2021). SafetySkirt. https://
www.trailerguards.com/safetyskirt
 Commercial Truck Trader. (2025). Commercial Truck Trader. https://
www.commercialtruck
trader.com/
 Consumer Reports. (2023). Comments of Consumer Reports to the 
National Highway Traffic Safety Administration on the Request for 
Comments: Side Underride Guards Advance Notice of Proposed Rulemaking 
Docket No. NHTSA-2023-0012. https://downloads.regulations.gov/NHTSA-
2023-0012-2072/attachment_1.pdf
 Ehrlich et al., (2020). Side underride guard (Patent U.S. 
10,549,797 B2). U.S. Patent https://
patentimages.storage.googleapis.com/5f/09/8a/90de159b7d4d6e/
US10946824.pdf
 Epstein, A. K. (2022). Lateral protective devices (side guards) and 
vulnerable road users 
safety [Slides]. https://www.volpe.dot.gov/sites/volpe.dot.gov/files/
2023-01/Volpe_BCIRPU_
LPD_slides.pdf
 Epstein, A. K., Peirce, S., Breck, A., Cooper, C., & Segev, E. 
(2014). Truck sideguards for Vision Zero: review and technical 
recommendations for Safe Fleet Transition Plan pilot deployment. John 
A. Volpe National Transportation Systems Center (U.S.). https://
rosap.ntl.bts.gov/view/dot/12164
 Executive Office of the President. (2021). Presidential Memorandum: 
Restoring Trust in Government Through Scientific Integrity and 
Evidence-Based Policymaking. Federal Register, 86(26), 8845-8851. 
https://www.govinfo.gov/content/pkg/FR-2021-02-10/pdf/2021-02839.pdf
 Federal Highway Administration. (1969). Motor Vehicle Safety 
Standards; Rear Underride Protection; Trailers and Trucks with Gross 
Vehicle Weight Rating Over 10,000 Pounds. Federal Register, 34(53), 
5383-5384. https://www.govinfo.gov/content/pkg/FR-1969-03-19/pdf/FR-
1969-03-19.pdf
 Federal Motor Carrier Safety Administration. (2024). Crash Cost 
Methodology. https://www.fmcsa.dot.gov/sites/fmcsa.dot.gov/files/2024-
12/FMC-PRE-240812-001-Federal%20Motor
%20Carrier%20Safety%20Administraction%20Crash%20Cost%20Methdology%20Repo
rt-2024
_0.pdf
 Fontaine Commercial Trailer Inc. (2021). Side underride guard 
assembly for a trailer (Patent U.S. 11,713,013 B2). https://
patents.justia.com/patent/20220009436
 Fortier. P. H. (2019). Side protection device for a vehicle, 
related kit and vehicle provided with the same (Patent U.S. 10,343, 636 
B2). https://patentimages.storage.googleapis.com/27/4b/50/
9c2dbe1e1cc865/US10343636.pdf
 Fortier. (2025). Road safety and efficiency; Lateral Protection, 
FLEXIGUARD-FRT: Ultra flexible for maximum protection and savings. 
Flexiguard FRT. https://flexiguardfrt.com/en/lateral-protection/
 Galipeau-Belair, P. (2014). Design and development of side 
underride protection devices (SUPD) for heavy vehicles. [Master's 
thesis, University of Ontario Institute of Technology]. https://
hdl.handle.net/10155/416
 Galipeau-Belair, P., S. Ghantae, D. Critchley, S. Ramachandra, & M. 
El-Gindy. (2014). Optimized rigid side underride protection device 
designs for tractor-trailers and straight trucks. SAE Technical Papers, 
1, 1-12. https://www.sae.org/publications/technical-papers/content/
2014-01-0565/
 Giromini et al., (2012). Side underride cable system for a trailer 
(Patent U.S. 8,162.384 B2). U.S. Patent https://
patentimages.storage.googleapis.com/e3/70/8a/9a822ae04da651/US81623
84.pdf
 Government Accountability Office. (2019). Truck Underride Guards: 
Improved Data Collection, Inspections, and Research Needed (GAO-19-
264). https://www.gao.gov/products/gao-19-264
 Great Dane LLC. (2021). Underride guard assembly for trailers 
(Patent U.S. 2021/0309176 A1). U.S. Patent Office. https://
patentimages.storage.googleapis.com/83/ee/90/2e4d340effcd37/
US20210309176A1.pdf
 Hein, E. (2023a). ANPRM Comments to the National Highway Traffic 
Safety Administration on the Advance notice of proposed rulemaking; 
side underride guards. https://www.regulations
.gov/comment/NHTSA-2023-0012-2055
 Hein, E. (2023b). Comment to the National Highway Traffic Safety 
Administration on the Advance notice of proposed rulemaking; side 
underride guards; Underride Literature. https://www.regulations.gov/
comment/NHTSA-2023-0012-2055
 Hein, E. (2024). Analyzing Side Underride Crashes and Fatalities: 
An Examination Using Data from the Fatality Analysis Reporting System 
for the Years 2007 to 2020. https://www.regulations.gov/comment/NHTSA-
2023-0012-2087
 Hein, E. (2025). The estimated number of side underride, rear 
underride, and front override crashes and fatalities over the last 50 
years. https://www.regulations.gov/comment/NHTSA-2023-0012-2095
 Hernando, D. V., Lacruz, D. F., Herrer, L. C., Littago, H. M., 
Luque, P., & Mantaras, D. A. (2021). Numerical simulation of a 
semitrailer's lateral protection system against car frontal crash. 
Transportation Research Procedia, 58: 238-245. https://doi.org/10.1016/
j.trpro.2021
.11.033
 Hightman, J. (2024, April 30). NHTSA ACUP Meeting--Motions and 
Discussion, the Advisory Committee on Underride Protection 
(ACUP).[Video]. YouTube. https://www.youtube.com/watch?v=Y0jWRsGhTr4
 H.R. 7354, 119th Cong. (2026). Stop Underrides Act 2.0. https://
www.congress.gov/bill/119th-congress/house-bill/7354/text
 Hyundai Translead. (2022). Request for information about defect 
petition (DP21-004). https://static.nhtsa.gov/odi/inv/2021/INRD-
DP21004-11525P1.pdf
 Infrastructure Investment and Jobs Act, Pub. L. No. 117-58, 135 
Stat. 429 (2021). Congress.gov. https://www.congress.gov/117/plaws/
publ58/PLAW-117publ58.pdf
 Institute for Safer Trucking, & Road Safe America. (2023). Comments 
on the Advanced Notice of Proposed Rulemaking (ANPRM) on Side Underride 
Guards on Trailers and Semitrailers, Docket No. NHTSA-2023-0012. 
https://downloads.regulations.gov/NHTSA-2023-0012-2074/attachment_1.pdf
 Insurance Institute for Highway Safety. (2017a). 2009 Chevrolet 
Malibu Front-into-Trailer Side Underride Guard; 64.3 km/h. https://
annaleahmary.com/wordpress/wp-content/uploads/2020/07/IIHS-Underride-
Research-Crash-Dummy-Data.pdf
 Insurance Institute for Highway Safety. (2017b). 2010 Chevrolet 
Malibu Front-into-Trailer Side Underride Guard; 56 km/h. https://
drive.google.com/file/d/1BuUKKfBOjogLbswOAD
HwlNFJeKF8dppR/view?usp=sharing
 Insurance Institute for Highway Safety. (2017c, August 29). Side 
guard on semitrailer prevents underride in 40 mph test. https://
www.iihs.org/news/detail/side-guard-on-semitrailer-prevents-underride-
in-40-mph-test
 Insurance Institute for Highway Safety. (2023a). Comments on Side 
Underride Guards; Advance Notice of Proposed Rulemaking. (Docket No. 
NHTSA-2023-0012). https://www.regu
lations.gov/comment/NHTSA-2023-0012-0092
 Insurance Institute for Highway Safety. (2023b, June 23). NHTSA 
study underestimates benefits of side underride guards for trucks. 
https://www.iihs.org/news/detail/nhtsa-study-underestimates-benefits-
of-side-underride-guards-for-trucks
 Insurance Institute for Highway Safety. (2024). Request for 
Correction of Information under the Information Quality Act. https://
downloads.regulations.gov/DOT-OST-2025-0033-0001/attachment_1.pdf
 Insurance Institute for Highway Safety. (2025). Fatality Facts 
2023; Large trucks. https://www.iihs.org/research-areas/fatality-
statistics/detail/large-trucks
 Jaworski, L. S., & Montiel Rosales, O. E. (2024). Side impact guard 
for trailers (Patent US20240174192 A1). https://patents.google.com/
patent/US20240174192A1/en
 Kiefer, A. (2018). Underride guards (Patent U.S. 9,908,493 B1). 
U.S. Patent. https://patent
images.storage.googleapis.com/3e/de/56/9e46d9969c2fac/US9908493.pdf
 Kiefer, A. (2023a). Side underride guard crash test results. 
https://www.regulations.gov/comment/NHTSA-2023-0012-2079
 Kiefer, A. (2023b, June 20). Crash testing of SafetySkirt 
performance by 35 mph t-bone collision. https://www.regulations.gov/
comment/NHTSA-2023-0012-2065
 Kiefer, A. (2023c, August 3). LPD+ crash test of a bicycle with 
fully-guarded trailer [Video]. YouTube. https://www.youtube.com/
watch?v=HBtL9wPJwg0
 Kiefer, A. (2023d, August 11). SafetySkirt SIG.R (Side Impact Guard 
Retrofit) Crash Test 2023, 43 mph T-Bone [Video]. Vimeo. https://
vimeo.com/853825849
 Kumar, S., Enz, B., Ponder, P. L., & Anderson, B. (2009). 
Biomechanical analysis of protective countermeasures in underride motor 
vehicle accidents. Biomedical Sciences Instrumentation, 45, 89-94. 
https://pubmed.ncbi.nlm.nih.gov/19369745/
 Kunkel et al., (2021). Side underride guard (Patent U.S. 10,946,824 
B2). U.S. Patent https://patentimages.storage.googleapis.com/e2/3a/3c/
ec27043950b888/US10549797.pdf
 Kwan, Q., Badgley, J., Breck, A., Dawes, M., Epstein, A. K., Welty, 
K., McNally, A., & Peirce, S. (2019). Truck side guards and skirts to 
reduce vulnerable road user fatalities: Final report on net benefits 
and recommendations. https://annaleahmary.com/wordpress/wp-content/up
loads/2024/05/Cover-Sheet-Exhibit-B-combined.pdf
 Manins, R. (2024, February 25). $32.5M settlement after fatal crash 
that killed Army veteran. Atlanta Journal Constitution. Atlanta 
Journal-Constitution. https://www.ajc.com/news/atlan
ta-news/325m-settlement-after-fatal-crash-that-killed-army-veteran/
CUBZS2IDVBG5XI4J3KFG
P2VWKE/
 Mattos, G., Friedman, K., Kiefer, A., & Ponder, P. (2021). 
Protecting passenger Vehicles from Side Underride with Heavy Trucks. 
SAE Technical Papers, 2021, 1-12. https://doi.org/10.4271/2021-01-0288
 Mehrotra, K., & Thompson, A. C. (2023). DOT researchers suggested a 
way to make big trucks safer. After meeting with lobbyists, agency 
officials rejected the idea. Frontline. PBS. https://www.pbs.org/wgbh/
frontline/article/department-transportation-truck-side-guards-trucking-
lobbyists-safety/
 Minahan, D. J., & O'Day, J. (1977). Car-truck fatal accidents in 
michigan and texas. HSRI Res Rev, 8(3). https://deepblue.lib.umich.edu/
bitstream/handle/2027.42/662/38204.0001.001
.pdf;jsessionid=4571CCF545C83E3128EA98BEEF03FB54?sequence=2
 Moradi, R. (2012). Impact dynamics of mechanical systems and 
structures, and applications in crash energy management, impulse 
mitigation, and impact injury biomechanics [Dissertation, Wichita State 
University]. http://hdl.handle.net/10057/5363
 Morris, J. D. (1971, July 19). Agency drops safety plan opposed by 
trucking men. The New York Times, 49. https://www.nytimes.com/1971/07/
19/archives/agency-drops-safety-plan-opposed-by-trucking-men.html
 National Association of Mutual Insurance Companies. (2023). Side 
underride guards; Docket No. NHTSA-2023-001, Document Number: 2023-
0845. https://downloads.regulations.gov/ NHTSA-2023-0012-0096/
attachment_1.pdf
 National Center for Statistics and Analysis. (2023). Side impact 
guards for combination truck-trailers: Cost-Benefit analysis. 
Department of Transportation. National Highway Traffic Safety 
Administration. https://crashstats.nhtsa.dot.gov/Api/Public/
Publication/813404
 National Highway Traffic Safety Administration. (1971). Rear 
underride protection; termination of notice of proposed rule making. 
Federal Register, 36(118), 11750. https://www.govinfo.gov/content/pkg/
FR-197106-18/pdf/FR-1971-06-18.pdf
 National Highway Traffic Safety Administration. (1979). Denial of 
petition for rulemaking. Federal Register, 44(186), 55077-55078. 
https://www.govinfo.gov/content/pkg/FR-1979-09-24/pdf/FR-1979-09-24.pdf
 National Highway Traffic Safety Administration. (1991). Preliminary 
Regulatory Evaluation, Combination Truck and Rear Underride Guards. 
https://www.regulations.gov/document/NHTSA-1996-1684-0003
 National Highway Traffic Safety Administration. (1996). Federal 
motor vehicle safety standards rear impact guards; Rear impact 
protection. Federal Register, 61(16), 2004-2036. https://
www.govinfo.gov/content/pkg/FR-1996-01-24/pdf/96-682.pdf
 National Highway Traffic Safety Administration. (2013). Heavy-
Vehicle Crash Data Collection and Analysis to Characterize Rear and 
Side Underride and Front Override in Fatal Truck Crashes. https://
www.nhtsa.gov/sites/nhtsa.gov/files/811725.pdf
 National Highway Traffic Safety Administration. (2014). Federal 
motor vehicle safety standards; Rear impact guards, rear impact 
protection; Grant of petition for rulemaking; Still evaluating the 
petitioners' request to improve side guards. Federal Register, 79(132), 
39362-39363. https://www.govinfo.gov/content/pkg/FR-2014-07-10/pdf/
2014-16018.pdf
 National Highway Traffic Safety Administration. (2018a). Computer 
Modeling and Evaluation of Side Underride Protective Device Designs. 
https://www.nhtsa.gov/ sites/nhtsa.gov/files/documents/
13611_supd_report_041118_v4-tag.pdf
 National Highway Traffic Safety Administration. (2018b). National 
Traffic Speeds Survey III: 2015. https://rosap.ntl.bts.gov/view/dot/
35961/dot_35961_DS1.pdf
 National Highway Traffic Safety Administration. (2022a). Denial of 
motor vehicle defect petition, DP21-004. Federal Register, 87(127), 
39899-39901. https://www.federalregister.gov/documents/2022/07/05/2022-
14165/denial-of-motor-vehicle-defect-petition-dp21-004
 National Highway Traffic Safety Administration. (2022b). Freedom of 
Information Act Request, ES21-000489. https://drive.google.com/file/d/
1MkPh2YWl3TXi13C3Mv-1rjSg6wHyv_U7/view?
usp=drive_link
 National Highway Traffic Safety Administration. (2023). Advanced 
notice of proposed rulemaking; side underride guards. Federal Register, 
88(77), 24535-24543. https://www.federal
register.gov/documents/2023/04/21/2023-08451/side-underride-guards
 National Highway Traffic Safety Administration. (2025a). Denial of 
motor vehicle defect petition, DP24-004. Federal Register, 90(61), 
14409-14410. https://www.federalregister.gov/documents/2025/04/01/2025-
05561/denial-of-motor-vehicle-defect-petition-dp24-004
 National Highway Traffic Safety Administration. (2025b). Fatality 
Analysis Reporting System. Crash data report from a query of 
pedestrian, bicyclist, and motorcyclist deaths with the right or left 
side of a large truck. https://drive.google.com/file/d/1tToSan_GmIa9-
DYFI337Pz6UuvBa
_bya/view?usp=sharing
 National Highway Traffic Safety Administration. (2025c). NHTSA's 
Core Values. https://www.nhtsa.gov/about-nhtsa/nhtsas-core-values
 National Highway Traffic Safety Administration. (2026). Fatality 
analysis reporting system 
analytical user's manual, 1975-2024. https://crashstats.nhtsa.dot.gov/
Api/Public/Publication/813794
 National Transportation Safety Board. (1971). Recommendation for 
NHTSA to consider adding side underride protection; H-71-042. https://
data.ntsb.gov/carol-main-public/sr-details/H-71-042
 National Transportation Safety Board. (2013). Crashes involving 
single-unit trucks that resulted in injuries and deaths. https://
www.ntsb.gov/safety/safety-studies/Pages/SS1301.aspx
 National Transportation Safety Board. (2014). Safety 
recommendations; H-14-001 through -007. https://www.ntsb.gov/safety/
safety-recs/RecLetters/H-14-001-007.pdf
 National Transportation Safety Board. (2023). Comment on NHTSA's 
ANPRM side underride guards docket number NHTSA-2023-0012. https://
www.regulations.gov/comment/NHTSA-2023-0012-0100
 Nespral, B. (2025, August 23). Bond denied for truck driver accused 
of killing 3 in U-turn crash on Turnpike. NBC 6 Miami. https://
www.nbcmiami.com/news/local/bond-denied-for-truck-driver-accused-of-
killing-3-in-u-turn-crash-on-turnpike/3681876/
 North American Council for Freight Efficiency. (2019). 2019 Annual 
fleet fuel study. https://nacfe.org/wp-content/uploads/2020/01/NACFE-
2019-Annual-Fleet-Fuel-Study-Report-122919-FINALA.pdf
 North American Council for Freight Efficiency. (2020). Confidence 
report: Trailer aerodynamic devices. https://nacfe.org/wp-content/
uploads/2020/09/FullAeroTrailorConfidenceReport2020
.pdf
 Office of Management and Budget. (2005). Final information quality 
bulletin for peer review. Federal Register, 70(10), 2664-2677. https://
www.federalregister.gov/documents/2005/01/14/05-769/final-information-
quality-bulletin-for-peer-review
 Office of Management and Budget. (2023). Circular A-4, regulatory 
analysis. https://bidenwhitehouse.archives.gov/wp-content/uploads/2023/
11/CircularA-4.pdf
 Office of Management and Budget. (2025). Side underride guards on 
trailers and semitrailers. https://www.reginfo.gov/public/do/
eAgendaViewRule?pubId=202504&RIN=2127-AM54
 Owner-Operator Independent Drivers Association. (2025a). Testimony 
of Lewie Pugh, executive vice president owner-operator independent 
drivers association before the united states house of representatives, 
committee on transportation & infrastructure, subcommittee on highways 
& transit ``America Builds: How Trucking Supports American 
Communities''. https://transportation.house.gov/UploadedFiles/03-26-
2025_HT_Hearing_-_Lewie_Pugh_-_Testimony
.pdf
 Owner-Operator Independent Drivers Association. (2025b). Docket # 
DOT-OST-2025-0026, ``ensuring lawful regulation; reducing regulation 
and controlling regulatory costs''. https://downloads.regulations.gov/
DOT-OST-2025-0026-0901/attachment_1.pdf
 Padmanaban, J. (2013). Estimating side underride fatalities using 
field data. Annals of Advances in Automotive Medicine, 57, 225-232. 
https://pmc.ncbi.nlm.nih.gov/articles/PMC3861
811/pdf/ffile002.pdf
 Rechnitzer, G. (1993). Truck involved crash study: fatal and injury 
crashes of cars and other road users with the front and sides of heavy 
vehicles. https://www.monash.edu/data/assets/pdf_file/0020/216650/
muarc035.pdf
 S. 3775, 119th Cong. (2026). https://www.congress.gov/bill/119th-
congress/senate-bill/3775/text
 Seven Hills Engineering LLC. (2018). Side Underride Guard 47.2 MPH 
Test Speed [Video]. YouTube. https://www.youtube.com/
watch?v=QEHX7omUpuw
 Seven Hills Engineering LLC. (2020). Comments on docket number 
NHTSA 2015-0118 and GAO-19-264 Recommendation. https://
annaleahmary.com/wordpress/wp-content/uploads/2020/08/2020-7-Hills-
Engineering-Comments-to-NHTSA-Docket-2015-0118.pdf
 Seven Hills Engineering LLC. (2023). Comment on NHTSA's ANPRM side 
underride guards Docket Number NHTSA-2023-0012. https://
www.regulations.gov/comment/NHTSA-2023-0012-2050
 Sievers, M. (2020). Hein v. Utility Trailer Manufacturing Company: 
Jury sends a message to trailer manufacturers about side underride. 
Journal of Trucking Litigation, Winter/Spring (2020), 3-9. https://
drive.google.com/file/d/1r-AG9GVTNYqs351YZA-i1x1JRxvD5yJl/view?usp
=sharing
 Stoughton. (2020). Side Impact Guard Test. https://
static.nhtsa.gov/ odi/inv/2021/INRL-DP21004-11531.pdf Stoughton. 
(2022a). New Rear Underride Guard: Now the standard for dry vans; no 
additional cost. No additional weight. https://
www.stoughtontrailers.com/Portals/0/
documents/NEW%20Underride%202022.pdf?ver=2022-01-18-085406-390
 Stoughton. (2022b). Response to defect petition, DP21-004. https://
static.nhtsa.gov/odi/inv/2021/INRL-DP21004-11529P1.pdf
 Strick Corporation. (2000). Side guard cost estimates. Strick 
Corporation's supplemental response to Plantiff's demand for production 
of documents. Case No. VC048745. https://annaleahmary.com/wordpress/wp-
content/uploads/2021/05/2000-Strick-Underride-Indermo
dal-Guard-Design.pdf
 Strick Trailers, LLC. (2022). Response to defect petition, DP21-
004. https://static.nhtsa.gov/odi/inv/2021/INRL-DP21004-11533.pdf
 Thompson, A. C., Hajj, K., & Schonder, G. (2023a, June 13). 
America's dangerous trucks [Video]. FRONTLINE and ProPublica. https://
www.pbs.org/wgbh/frontline/documentary/americas-dangerous-trucks/
 Thompson, A. C., Mehrotra, K., & Ingram, J. (2023b). Trapped under 
trucks; how regulators failed to act to prevent underride crashes. 
FRONTLINE. PBS. https://www.pbs.org/wgbh/frontline/article/trucks-
underride-crashes-nhtsa-dot-iihs-safety-cars/
 Trailer Body Builders. (2021). Comprehensive list of historical 
truck and trailer production figures. https://www.trailer-
bodybuilders.com/trailer-output/article/21743538/comprehensive-list-of-
historical-truck-and-trailer-production-figures
 Trailer Body Builders. (2023). Trailer output report: 2022. https:/
/www.trailer-body
builders.com/trailer-output/article/21262072/trailer-output-report-2022
 Trailer Body Builders. (2025, March 4). Trailer manufacturer output 
report 2024. https://www.trailer-bodybuilders.com/trailer-output/
article/55267500/trailer-output-report-2025
 Truck Safety Coalition, Citizens for Reliable and Safe Highways, & 
Parents Against Tired Truckers. (2023). Side Underride Guards; DOT/
NHTSA # NHTSA-2023-0012. https://downloads.regulations.gov/NHTSA-2023-
0012-2040/attachment_1.pdf
 Truck Trailer Manufacturers Association. (1969). Letter to Federal 
highway safety bureau, Federal highway administration; opposition to 
rear underride protection; Docket No. 1-11. https://www.courts.mo.gov/
fv/c/Exhibit%208.PDF?courtCode=22&di=12775660
 Truck Trailer Manufacturers Association. (2021). Draft recommended 
practice: Side impact guard. [Included in Stoughton Trailers, LLC, Side 
Impact Guard Test]. National Highway Traffic Safety Administration. 
https://static.nhtsa.gov/odi/inv/2021/INRL-DP21004-11531.pdf
 Truck Trailer Manufacturers Association. (2023, June 6). Advanced 
notice of proposed rulemaking; Side underride guards [Docket No. NHTSA-
2023-0012]. https://downloads.regula
tions.gov/NHTSA-2023-0012-0099/attachment_1.pdf
 U.S. Department of Transportation. (2022). Rulemaking Handbook. 
https://www.transpor
tation.gov/sites/dot.gov/files/2022-05/2022-DOT-Reg-Handbook.pdf
 U.S. Department of Transportation. (2024a). Scientific integrity 
policy of the United States department of transportation. https://
web.archive.org/web/20250124034234/ https:/www.trans
portation.gov/sites/dot.gov/files/2024-02/
DOT%20Scientific%20Integrity%20Policy%20Final%
20508.pdf
 U.S. Department of Transportation. (2024b). Benefit-cost analysis 
guidance for discretionary grant programs. https://
www.transportation.gov/sites/dot.gov/files/2024-11/Benefit%20Cost%
20Analysis%20Guidance%202025%20Update%20%28Final%29.pdf
 U.S. Department of Transportation. (2025). Departmental guidance on 
valuation of a statistical life in economic Analysis. https://
www.transportation.gov/office-policy/transportation-policy/revised-
departmental-guidance-on-valuation-of-a-statistical-life-in-economic-
analysis
 U.S. Energy Information Administration. (2025, June 25). This week 
in petroleum. https://www.eia.gov/petroleum/weekly/archive/2025/250625/
includes/hometables_print.php
 U.S. Environmental Protection Agency. (2025, January 15). Emission 
factors for greenhouse gas inventories (GHG Emission Factors Hub). 
https://www.epa.gov/system/files/documents/2025-01/ghg-emission-
factors-hub-2025.pdf
 Utility Trailer Manufacturing Company. (2022a). Response to defect 
petition, DP21-004. https://static.nhtsa.gov/odi/inv/2021/INRL-DP21004-
11074P1.pdf
 Utility Trailer Manufacturing Company. (2022b). Side impact guard 
[SIG]; Sales sheet. https://www.utilitytrailer.com/wp-content/uploads/
Sales-Sheet-SIG-Side-Impact-Guard.pdf
 Utility Trailer Manufacturing Company. (2022c). Utility trailer 
side impact guard tests. https://drive.google.com/file/d/
1ogySPLGiM5DgP_gcFOy9KTUWvBpdlfGb/view?usp=sharing
 Utility Trailer Manufacturing Company. (2023a). Side underride 
guards (Patent U.S. 11,691,583 B1). U.S. Patent https://
www.freepatentsonline.com/11691583.pdf
 Utility Trailer Manufacturing Company. (2023b, October 19). Side 
underride guard/side impact guard crash tests [Video]. YouTube. https:/
/www.youtube.com/watch?v=pWRUMaUb4T0
 Utility Trailer Manufacturing Company. (2024a). Aerodynamic 
savings; fuel more profitability; make a positive impact on your bottom 
line by equipping your trailers with the utility side skirt. https://
www.utilitytrailer.com/aerodynamic-savings/
 Utility Trailer Manufacturing Company. (2024b). Side underride 
guard makes an impact on safety. https://www.utilitytrailer.com/impact-
guard/
 Vanguard National Trailer Corporation. (2019). Strap underride 
guard (Patent U.S. 2019/0184925 A1). U.S. Patent https://
patentimages.storage.googleapis.com/3b/98/ee/bba021a50785
1b/US20190184925A1.pdf
 Volpe. (2021). Truck lateral protective device technical overview. 
https://www.volpe.dot.gov/sites/volpe.dot.gov/files/2021-04/
Truck_Lateral_Protective_Device_Technical_Overview.pdf
 Walsh, J. (2021, April 20). Trucker charged with manslaughter for 
crash that killed three Livermore teens. Danville San Ramon. https://
www.danvillesanramon.com/news/2021/04/20/trucker-charged-with-
manslaughter-for-crash-that-killed-three-livermore-teens/
 Williams, N., & Murray, D. (2020). An analysis of the operational 
costs of trucking: 2020 up-date. https://truckingresearch.org/wp-
content/uploads/2020/11/ATRI-Operational-Cost-of-Trucking-2020-
FINAL.pdf
 Wilson, C. (2017, September 29). Wabash prototype: Side underride 
guard with aero skirt. Trailer Body Builders, 1-3. https://www.trailer-
bodybuilders.com/print/content/21742324
 ______
 
 [GRAPHIC(S) NOT AVAILABLE IN TIFF FORMAT] 
 ______
 
 [GRAPHIC(S) NOT AVAILABLE IN TIFF FORMAT] 
 ______
 
 Response to Written Question Submitted by Hon. Ted Cruz to 
 Ian Jefferies
 Question 1. In his written testimony, Mr. Scandaglia says the 
Teamsters support the use of automated track inspection, or ATI, as an 
``additive tool to augment twice weekly track inspections,'' but not to 
replace these visual inspections. Please describe any safety benefits 
from using ATI to reduce the frequency of visual track inspections 
rather than having ATI supplement the current visual inspection regime, 
if applicable.
 Answer. Sustained railroad infrastructure investment and 
advancements in track safety--through technologies like automated track 
inspections (ATI), improved track components, and enhanced maintenance 
practices--have led to significant safety gains. In 2025, the freight 
rail industry cited improving safety metrics, most notably, 
derailments, equipment, and track-caused accidents as the lowest on 
record.
 ATI, also known as track geometry measurement systems (TGMS), 
incorporates key elements such as distance between rails, track 
alignment, elevation, and curvature to quickly identify and remediate 
potential track deficiencies. Using lasers and cameras mounted to 
locomotives or rail cars, ATI inspects track at speed as trains move 
across the network. This enables railroads to identify defects 
invisible to the human eye, assess track structural performance under 
the load of a train, and gather data that can be analyzed for patterns 
or warning signs.
 ATI technology also improves safety by reducing railroad track 
inspectors' exposure to risk along railroad right-of-way. Visual 
inspections are done by walking on and around the track or by hi-rail 
vehicles. FRA data show that slip and fall incidents are the highest 
source of employee injury. Hi-rail vehicle operations, particularly 
near highway-rail grade crossings, also pose significant hazards. ATI 
enables railroads to meet inspection mandates while also lowering risk 
to inspectors.
 Technological solutions are imperative to achieving an accident-
free future. While not mutually exclusive, ATI technologies that track 
geometry conditions outperform mandated manual inspections, and 
railroads have years of data from pilot programs to demonstrate those 
safety improvements.
 The data is clear: blending ATI with reduced visual inspections 
increases rail safety and improves track health. Under the pilot 
program to test ATI's effectiveness, railroads found clear reductions 
in the number of derailments when ATI was used and manual inspections 
were reduced. Derailments dropped from 11 before the pilot program to 
three, two of which occurred when manual inspections were still 
occurring twice weekly and one of which occurred when ATI was inactive. 
Railroads also found fewer track defects over time, reflecting better 
track health when ATI is used. Combined, railroads found just under six 
defects for every 100 track miles inspected before the pilot program. 
After the pilot, railroads found 0.24 defects per 100 track miles 
inspected.
 The combination of manual inspections and ATI is important because 
TGMS and ATI are not designed to identify every defect, and manual 
inspections are still necessary to find problems like vegetation 
overgrowth, broken rails, or misplaced ballast, which can be identified 
by a manual inspection. While ATI can identify changes in geometry 
related to those defects, it won't see the defects itself. Providing 
railroads the flexibility to adjust the number of manual inspections 
when ATI is used improves safety and efficiency.
 ______
 
 Response to Written Questions Submitted by Hon. Bernie Moreno to 
 Ian Jefferies
 Question 1. Hot box detectors have become an increasingly important 
part of the industry's safety framework, but no safety technology is 
infallible.

 a. What objective performance measures, including derailment rates, 
detector reliability, inspection effectiveness, and employee-reported 
defects, should be used to evaluate whether the combination of detector 
technology, equipment inspections, and frontline observations is 
effectively preventing equipment-related derailments?
 Answer. Wayside detection systems like hot bearing detectors (HBD) 
have been voluntarily used across the rail network for decades. The 
essential performance measure for HBDs and other wayside detectors like 
acoustic bearing detectors (ABDs) is the rate of bearing-caused 
accidents. If HBDs, ABDs, and other detectors are working effectively, 
it will be reflected in reduced bearing-related accidents and 
derailments. Generally, bearing-related and many other internal 
mechanical-component defects are not even capable of being detected via 
required manual visual inspections, but rather only by use of 
technologies the railroads have voluntarily implemented.
 The rate of train accidents caused by overheated bearings has 
dropped 68 percent from 2005 to 2025, and overall in 2025, the rate of 
equipment-caused accidents reached an all-time low. These improvements 
have been achieved through the railroads' layered use of technology-
based detection systems and advanced computer-based trending analysis 
to identify bearings that may become a problem before they cause an 
incident.
 But wayside detection systems have been used for several decades, 
and Class I railroads are using even more innovative technology to 
identify equipment defects before they cause accidents. For example, 
railroads have deployed inspection portals equipped with state-of-the-
art, ultra high-resolution cameras and stadium lighting to capture 
nearly 1,000 high-resolution, 360-degree images of each rail car as it 
passes through the portal at track speed. These images are analyzed 
using AI to identify defects that would be otherwise invisible to the 
naked eye allowing crews to fix them before the train leaves the yard. 
The future of reducing equipment-caused accidents lies not in wayside 
detection systems but in more advanced technology to identify and 
repair bearings before they reach those temperature thresholds.

 Question 2. Railroads are investing heavily in advanced signaling, 
automation, and digital systems.

 a. What objective indicators, such as workforce qualifications, 
training completion, vacancy rates, response times to system failures, 
and employee proficiency, should be used to determine whether workforce 
expertise and staffing levels are keeping pace with the increasing 
technological complexity of these systems?
 Answer. The essential performance measure for signal systems is the 
rate of mainline train accidents. If workforce qualifications, training 
completion, staffing levels, and technical expertise are keeping pace 
with increasingly sophisticated technologies, that should be reflected 
in the safe and reliable operation of signal systems.
 Signal-caused mainline accidents have averaged 2 per year over the 
past decade. This translates into less than 1 accident every 267 
million mainline train miles. These results are driven by significant 
investments in proven technology. Railroads have invested heavily into 
Positive Train Control (PTC) systems and microprocessor-based and self-
diagnostic system technology to better manage train movements and 
improve railroad safety. PTC is a critical safety technology that 
automatically monitors and can stop trains to prevent certain types of 
collisions and derailments. PTC's geo-mapping, advanced communications, 
and upgraded locomotives can help support greater capacity, better 
service, and lower emissions.
 At the same time, microprocessor-based and self-diagnostic 
technologies provide continuous monitoring of signal-system health. 
Unlike traditional inspection approaches that rely primarily on 
periodic visual inspections, these technologies provide real-time 
status information and early warning of degrading conditions. This 
enables railroads to identify and address issues before they result in 
equipment failures, improving both safety and reliability.

 Question 3. The committee discussed detectors, grade-crossing 
technologies, advanced signaling systems, and automation. All these 
technologies ultimately depend on skilled workers to install them, 
maintain them, interpret the information they generate, and respond 
when they fail.

 a. What evidence can the industry provide that workforce capacity, 
training, and technical expertise are growing at a rate sufficient to 
support the increasing complexity of these technologies?
 Answer. The strongest evidence that workforce capacity, training, 
and technical expertise are keeping pace with the industry's increasing 
use of advanced technologies is the industry's overall safety 
performance. If railroads lacked the workforce capability necessary to 
install, maintain, interpret, and respond to increasingly complex 
technologies, that would be expected to manifest itself in higher 
accident rates, greater system failures, or degraded safety 
performance.
 The rail industry assesses whether their workforce is effectively 
supporting technology deployment through operational and safety 
outcomes. Those outcomes demonstrate strong performance. Industry-wide 
derailment rates, track-caused accident rates, and equipment-caused 
accident rates reached historic lows in 2025. Likewise, the employee-
on-duty injury rate was the second-lowest industry-wide and the lowest 
ever recorded for Class I railroads.
 Another important metric is employee retention, tenure, and 
collective bargaining. The 2025 National Collective Bargaining Round 
was the fastest in modern history with all unions and railroads 
participating in national bargaining reaching a five-year ratified 
agreement within 18 months, compared with the average of over 30 months 
in past rounds. That is evidence that railroaders who are actually on 
the ground working on the network are satisfied with compensation, 
health care coverage, leave policies, and work rules Class I railroads 
are negotiating. Moreover, railroad workers have a median tenure of 14 
years in the industry, three times longer than the national average and 
with the Federal government as a distant second. As more technology is 
incorporated into railroad, workers are seeing their quality of life, 
predictability, and work improve. We are committed to keeping that 
momentum going.
 ______
 
 Response to Written Question Submitted by Hon. Maria Cantwell to 
 Ian Jefferies
 Federal Funding for Infrastructure and Technology: According to the 
American Society of Civil Engineers, cutting transportation funding 
below the level passed under the Bipartisan Infrastructure Law could 
cost the average American family an estimated $700 a year.

 Question 1. The President's Budget request for next year would cut 
funding for DOT's rail programs by 85 percent. Do you think we need to 
continue funding rail infrastructure at the Bipartisan Infrastructure 
Law level in the next surface reauthorization?
 Answer. Class I railroads do not receive direct Federal funding and 
own, operate, and maintain their own infrastructure, reinvesting an 
average of $23 billion a year back into the railroad. Those private 
investments have made rail one of the safest modes of transportation in 
the country. However, the communities in which we operate and our 
public partners rely on Federal grant programs to repair and improve 
infrastructure projects in their states, towns, and regions, including 
rail projects. That funding can be critical to improve supply chain 
fluidity, safety, and efficiency, and railroads support robust 
infrastructure funding.
 Railroads are particularly supportive of programs like the Railroad 
Crossing Elimination (RCE) Program you championed, which provides the 
first dedicated funding for projects to separate grade crossings around 
the network. Grade crossings are the most dangerous point of any rail 
network because they are the only point on the railroad where the 
public and trains cross paths. These projects are large, expensive, and 
complicated, and dedicated, consistent funding through RCE is critical 
for communities to complete them.
 The additional funding for the Consolidated Rail Infrastructure and 
Safety Improvements (CRISI) program made by the Bipartisan 
Infrastructure Law was also instrumental in supporting short line and 
other railroads' investments to improve safety and efficiency. These 
improvements bolster the entire rail network. Maintaining robust CRISI 
funding going forward will improve safety outcomes and improve supply 
chain fluidity.
 ______
 
 Response to Written Questions Submitted by Hon. John Hickenlooper to 
 Ian Jefferies
Automated Track Inspection (ATI)
 Colorado's mountainous terrain, steep grades, and extreme weather 
present unique safety challenges for freight rail.
 In the hearing, you discussed how automated track inspection (ATI) 
and artificial intelligence (AI) tools are helping to identify defects 
earlier than traditional visual methods.
 At the Transportation Technology Center (TTC) in Pueblo, Colorado, 
we have a world-class facility dedicated to testing innovative 
technology to improve rail safety.

 Question 1. Mr. Jefferies, given the environmental demands on our 
mountain corridors like the Moffat Tunnel, how is the railroad industry 
ensuring that AI algorithms for ATI are actually trained for extreme 
high-altitude terrain?
 Answer. The automated systems railroads use for ATI rely on track 
charts and inspection systems that contain all the necessary terrain 
information, including elevation and curvature as well as specific 
location information on infrastructure such as bridges, tunnels, 
switches, and others for the track section they will inspect. 
Algorithms are generated using the FRA's geometry requirements or, in 
most cases, the railroads' stricter geometry requirements to measure 
changes in geometry. It is important to note, there is no practical 
difference between testing at sea level vs testing at high altitude as 
far as ATI is concerned, and this technology has been used across the 
network for many years at various elevations to ensure it functions 
properly.

 Question 2. Mr. Jefferies, how do we ensure that these automated 
tools appropriately supplement the experienced track inspectors who 
know the ins and outs of our mountain passes?
 Answer. ATI and other automated tools are not designed to 
completely replace our highly-trained, highly-skilled railroad 
workforce who know the territory and can spot defects and issues 
visible to the naked eye. For example, ATI is not designed to identify 
vegetation overgrowth.
 That is why combining ATI with manual inspections to identify and 
fix defects leads to the best safety outcomes. It is also important to 
note that ATI can capture changes in geometry caused by issues like 
broken ties and ballast. The automated system will flag those defects, 
and crews will be deployed to address them. Track geometry measurements 
provide an overall indicator of the health a track system and its 
components.
Automated Track Inspection (ATI) on Multi-use Tracks
 Denver's Regional Transportation District (RTD) operates 10 
distinct rail lines that actively share right-of-way corridors with 
Class I freight operators like BNSF and Union Pacific.
 The Federal Railroad Administration (FRA) has begun to advance and 
expand waivers allowing freight railroads to transition toward an 
approach that pairs Automated Track Inspection (ATI) with reduced 
manual track walking.

 Question 3. Mr. Jefferies, considering these changes, how are these 
operational changes being coordinated on shared tracks where passenger 
safety is also at risk?
 Answer. The track owners are responsible for all track inspection 
activities on their tracks, and that information is shared with any 
other railroad using the track, freight or passenger. ATI tests at the 
specified track class and maximum speed value for all types of traffic 
on the line, meaning the technology is measuring track safety for 
freight, passenger, or commuter service if they are sharing the line. 
If there are issues or defects that make it necessary to reduce speed 
or make other adjustments to any traffic on the line, freight or 
passenger, those changes are communicated to the other operators 
through daily updated track bulletins, immediate online messaging, or 
verbal communications directly between trains. Industry experience has 
shown that blending ATI inspections with manual visual inspections 
improves railroad safety, and so I'd fully expect passenger safety is 
improved in a corridor where ATI inspections are also voluntarily being 
used by railroads to complement legacy manual visual inspection 
requirements.

 Question 4. Mr. Jefferies, how is the rail industry sharing 
automated inspection data with transit partners like RTD to ensure 
maximum safety for both heavy freight and everyday Colorado commuters?
 Answer. While I cannot speak directly to how the individual 
railroads operating that share right-of-way corridors with RTD 
specifically share these messages, as explained above, in general this 
information is shared via daily updates to track bulletins, immediate 
online messaging, or verbal communication directly to train operators. 
I will be happy to connect you with any of the track owners who share 
right-of-way within RTD to discuss specific operating standards.
 ______
 
 Response to Written Question Submitted by Hon. Ted Cruz to 
 Chris Spear
 Question 1. In 2024, a Missouri jury awarded $460 million against 
Wabash after a vehicle collided with the rear of one of the company's 
trailers. Although the crash occurred in 2019, the trailer involved was 
manufactured in 2004 and complied with the Federal safety standards 
applicable at the time. The verdict raises concerns about regulatory 
certainty for truckers and motor carriers. If purchasing federally 
compliant equipment does not shield manufacturers and operators from 
liability years later, what incentives remain for compliance, and how 
can carriers confidently make long-term equipment investments without 
fear of evolving legal standards?
 Answer. These verdicts raise fundamental concerns for the trucking 
industry that extend well beyond the facts of any single case. At issue 
is whether manufacturers and motor carriers can rely on the Federal 
motor vehicle safety standards established by the National Highway 
Traffic Safety Administration (NHTSA) when making long-term equipment 
investments.
 Congress intended NHTSA to serve as the Nation's expert regulator 
for motor vehicle safety. Under the National Traffic and Motor Vehicle 
Safety Act of 1966, and today under 49 U.S.C. Sec. 30103(b)(1), when 
NHTSA promulgates a Federal Motor Vehicle Safety Standard (FMVSS), 
states are prohibited from establishing different standards addressing 
the same aspect of motor vehicle safety. Those standards are developed 
through an open, transparent rulemaking process that considers 
engineering data, public input, costs, and safety outcomes.
 While Congress prohibited states from adopting conflicting 
equipment standards, 49 U.S.C. Sec. 30103(e) also provides that 
compliance with a Federal standard does not exempt a person from 
liability at common law. Increasingly, that provision has allowed 
juries applying state tort law to effectively impose equipment 
standards that differ from or exceed those adopted by NHTSA. The result 
is legal uncertainty that undermines Congress's intent to establish 
nationally uniform motor vehicle safety standards.
 Congressional action is needed to clarify Section 30103 of Title 49 
to ensure that when NHTSA has established a Federal motor vehicle 
safety standard governing a particular aspect of vehicle design, those 
standards cannot be effectively superseded through state common-law 
claims. Clarifying the statute would provide the legal certainty that 
manufacturers, motor carriers, and equipment purchasers need while 
preserving NHTSA's role as the Nation's primary motor vehicle safety 
regulator. Such a clarification would benefit the broader trucking 
industry and manufacturers by allowing carriers to make long-term 
equipment investments with confidence that compliance with Federal law 
provides meaningful certainty.
 Manufacturers already have strong incentives to comply fully with 
Federal safety standards. Failure to comply can result in costly 
recalls, civil and criminal penalties, enforcement actions, significant 
reputational harm, and substantial financial consequences. Those 
incentives are more than sufficient to ensure compliance with Federal 
law. The trucking industry does not need the additional threat of 
unpredictable punitive damages or state-law design standards that can 
be imposed years or decades after equipment was manufactured to 
motivate compliance.
 NHTSA sets standards that appropriately balance safety, 
feasibility, and cost. The trucking industry follows these standards 
and takes a proactive approach to safety, investing $14 billion 
annually in equipment, technologies, and driver training. Manufacturers 
devote substantial resources to designing, testing, and producing 
trailers that satisfy NHTSA's engineering-based requirements. Yet they 
increasingly face the prospect that meeting every applicable Federal 
standard may still be deemed legally insufficient years later because a 
jury concludes a different design should have been adopted. In 
practice, this encourages manufacturers to substitute speculation about 
future litigation for reliance on the expert judgments of the Federal 
agency Congress charged with making these determinations.
 The current legal environment sends exactly the wrong message. If 
NHTSA, after evaluating the available evidence through its rulemaking 
process, determines that a particular standard strikes the appropriate 
balance to maximize motor vehicle safety, that expert determination 
should carry greater weight than the hindsight judgments advanced by 
profit-seeking trial attorneys in individual courtrooms. Congress 
created NHTSA precisely because motor vehicle safety policy should be 
established through expert, nationwide regulation rather than piecemeal 
litigation.
 Importantly, this does not leave the public without recourse if a 
Federal safety standard becomes outdated or inadequate. Existing law 
already provides mechanisms for interested parties to petition NHTSA to 
amend its regulations. Industry participants, safety advocates, 
manufacturers, carriers, and members of the public can all participate 
in the rulemaking process and present evidence supporting stronger or 
different standards. That transparent regulatory process--not after-
the-fact litigation--should remain the primary means of evaluating and 
updating Federal motor vehicle safety standards.
 Ultimately, Congress should reaffirm its original intent by 
clarifying Section 30103 to preserve nationally uniform motor vehicle 
safety standards and provide certainty for manufacturers and motor 
carriers that invest in federally compliant equipment. America's supply 
chains depend on predictable national standards, and companies should 
be able to rely on NHTSA's expert determinations when making 
investments that remain in service for decades.
 ______
 
 Response to Written Questions Submitted by Hon. Maria Cantwell to 
 Chris Spear
 Federal Funding for Infrastructure and Technology: According to the 
American Society of Civil Engineers, cutting transportation funding 
below the level passed under the Bipartisan Infrastructure Law could 
cost the average American family an estimated $700 a year.

 Question 1. The President's Budget for next year would cut funding 
for DOT's freight programs by 36 percent. Do you think we need to 
continue funding freight infrastructure at the level provided in the 
Bipartisan Infrastructure Law in the next surface reauthorization?
 Answer. More than 80 percent of U.S. communities rely exclusively 
on trucking to meet their freight needs, and trucks deliver around 11.4 
billion tons of freight annually, which represents 73 percent of the 
Nation's tonnage. Over the next decade, truck drivers will be tasked 
with hauling an additional 2.7 billion tons of freight. Highway 
capacity, especially on the Interstate system, cannot adequately 
accommodate today's traffic, however, let alone the increase in future 
volumes. Traffic congestion on U.S. highways added $108.8 billion in 
costs to the trucking industry in 2022, including a nearly $1.7 billion 
cost to Washington State. These costs are ultimately passed on to 
American consumers.
 ATA agrees that Federal investment in freight infrastructure is 
critical to an efficient supply chain and economic growth. The best way 
Congress can help is to invest in the most pressing infrastructure 
needs facing the industry that moves the vast majority of freight 
across our country. ATA recommends including a dedicated highway 
freight bottleneck program in the next surface transportation bill, as 
well as a program designed to fix roads that connect the National 
Highway System to freight facilities, such as airports, seaports, and 
railyards, and providing those programs with robust funding.

 Technology to Lower Costs and Improve Freight Mobility: At a time 
when American families, farmers, and businesses are facing an 
affordability crisis, the President's latest budget request cuts 
funding for major freight and innovation investments. These grants fund 
projects like providing real-time information about parking 
availability and truck parking along the I-5 corridor in Washington.

 Question 2. How does real-time truck parking information improve 
safety and efficiency for drivers? Does reducing time spent searching 
for parking improve freight movement?
 Answer. A lack of truck parking is a nationwide challenge that has 
been identified by truck drivers as among their most pressing concerns 
for many years. Without sufficient capacity, drivers are sometimes 
forced to decide between parking in an unsafe location or continue 
driving, even when fatigued, and potentially in violation of Federal 
hours-of-service rules.
 Drivers pay a financial penalty when they must shut down early to 
ensure they have a place to sleep, or they lose time and burn fuel 
searching for a safe place to spend the night. This penalty is a 
disincentive to recruiting drivers that, compounded with frequent lack 
of access to safe parking, also disincentivizes women from entering 
fulfilling careers as truck drivers.
 While building more truck parking facilities is often the best 
solution to mitigate these challenges, in many cases capacity expansion 
may not be feasible due to financial constraints, local opposition, or 
simply a lack of available space. In the absence of more truck parking 
capacity, providing real-time information on the availability of 
existing truck parking could help to fully utilize existing truck 
parking capacity. However, investments in real-time parking information 
are an inadequate substitute for the construction of additional safe 
truck parking capacity to meet the needs of our Nation's drivers.

 Workforce Implications: There are over 34,000 truck drivers in the 
state of Washington. According to the American Trucking Associations, 
truck driving is one of the top five occupations in 30 states. While I 
do not anticipate autonomous vehicles will take over these roles 
overnight, I do think Congress needs to consider the significant 
implications this technology could have on those state economies.

 Question 3. What do you say to drivers who are concerned that 
automated trucks will eliminate their livelihoods?
 Answer. Drivers are the greatest resource for trucking fleets of 
all sizes across our country, and I do not foresee that changing for 
the industry. When considering the workforce implications of automated 
trucks, it is important to think about both the safety and economic 
requirements for deployments to be viable. Commercial vehicle drivers 
perform far more duties than simply driving the vehicle. They inspect 
and maintain their equipment. They keep the vehicles fueled throughout 
operations. They safely hook up trailers and secure the connections. 
They provide security for cargo while it is under the fleet's 
responsibility. Most importantly, they manage unexpected conditions 
like traffic, road closures, inclement weather, or other roadway 
unknowns. For automation to be both safe and economically viable, all 
of these non-driving functions must be accounted for, but today and for 
the foreseeable future, automation is only able to handle the immediate 
driving task in limited testing conditions.
 One of the major economic challenges for automation deployment will 
be addressing non-driving functions. Even where it is economically 
viable to deploy automation, there will need to be humans engaged in 
these non-driving functions to facilitate the deployment. For this 
reason, ATA believes that automated vehicle deployments will continue 
to be incremental and require new jobs for humans performing non-
driving roles. ATA simply supports providing opportunities for testing 
new technology to demonstrate where and when it can be deployed safely 
and economically for commercial vehicles.
 As highlighted in my written statement, ATA strongly supports the 
AV language in the BUILD America 250 Act as approved by the House of 
Representatives' Transportation and Infrastructure Committee in May. 
The Build America 250 Act proposes over $140 million for workforce 
development and strengthening employment opportunities for drivers, 
mechanics, and other industry professionals. ATA believes Congress and 
the DOT can facilitate the growth of both jobs and automation rather 
than choosing one or the other. ATA believes automation is one of many 
tools that the trucking industry can use to meet the growing needs of 
the economy, and that integrating automation into the human-driven 
system rather than replacing it will produce the most efficient and 
resilient outcomes.
 ______
 
 Response to Written Question Submitted by Hon. John Hickenlooper to 
 Chris Spear
Autonomous Commercial Vehicle Safety Milestones
 Anyone that has driven down Interstate 70 through the Rocky 
Mountains knows the high degree of caution it requires, especially 
during a winter storm. In the hearing you mentioned that Level 4 and 5 
autonomous truck testing is currently concentrated in flatter regions 
like Texas. However, operating an autonomous commercial vehicle on a 
flat, dry highway fundamentally differs from navigating a 6 percent 
down-grade on a snowy mountain pass in Colorado.

 Question. Mr. Spear, for companies actively developing autonomous 
trucking technology, what specific testing frameworks and safety 
milestones must be met to prove these platforms can safely navigate 
complex, high-altitude, severe-weather environments before widespread 
commercial deployment of AV trucks alongside everyday motorists?
 Answer. A comprehensive Federal framework for commercial automation 
safety needs to address not just typical driving scenarios but 
potential future deployments exactly like the I-70 example you 
provided. Congress and the Department of Transportation (DOT) have two 
major approaches available for ensuring safety, and ATA supports both 
pathways.
 The first approach is to ensure companies testing and deploying 
autonomous vehicles (AVs) have safe processes in place for their 
operations. This has so far been done via safety cases, with AV 
providers voluntarily submitting their safety cases to the DOT for 
review. ATA supports Congress and the DOT setting minimum requirements 
for safety cases to ensure they disclose sufficient information about 
their safety processes, where they are conducting their testing, and 
crucially how they are ensuring safety in the specific environments 
they are testing. This is critical for challenging environments such as 
the I-70 example you provided.
 The second approach is to ensure companies testing and deploying 
AVs maintain safety performance. This can be achieved by setting 
performance requirements that must be met before deployments and 
maintained throughout deployments. Performance requirements can take 
many forms, such as safety metrics, driving competency tests, or 
failure mode tests. ATA supports Congress and DOT setting appropriate 
performance requirements based on DOT's expertise to ensure that any AV 
deployment meets the minimum requirements and does so within the 
specific environments where they will be deployed. Again, this is 
critical for challenging environments such as the I-70 example you 
provided.
 A combined process-and performance-based approach to safety gives 
regulators two separate windows into risks and means to address them. 
As highlighted in my written statement, ATA strongly supports the AV 
provisions in the BUILD America 250 Act as approved by the House of 
Representatives' Transportation and Infrastructure Committee in May. 
The BUILD America 250 Act sets specific requirements on safety cases 
and directs DOT to create performance-based safety standards for 
automated vehicles, supporting a comprehensive approach to safety. ATA 
encourages Congress to work with DOT to build a Federal framework that 
ensures commercial automation engaged in interstate commerce would be 
subject to a single comprehensive safety requirement.
 ______
 
 Response to Written Questions Submitted by Hon. Maria Cantwell to 
 Laura Chace
 Federal Funding for Infrastructure and Technology: According to the 
American Society of Civil Engineers, cutting transportation funding 
below the level passed under the Bipartisan Infrastructure Law could 
cost the average American family an estimated $700 a year.

 Question 1. The President's Budget for next year eliminates funding 
for the SMART grants program which was funded in the Bipartisan 
Infrastructure Law to support the development of innovative 
transportation technologies. Do you support continuing Bipartisan 
Infrastructure Law investments in deploying smart technologies?
 Answer. Yes, the Intelligent Transportation Society of America (ITS 
America) supports continuing investments in transportation technologies 
at levels established in the Infrastructure Investment and Jobs Act 
(IIJA) or higher. Specifically, it is critical that the SMART grant 
program be reauthorized and re-appropriated at such levels. Consistent, 
dedicated funding for technology is critical for State and local 
transportation projects that rely on Federal funds to be able to 
utilize the most modern, safe, and innovative solutions. Federal 
investment is a critical signifier of a national transportation 
strategy that treats digital infrastructure as core infrastructure, and 
such a strategy remains necessary for the United States to fully 
compete in the development and deployment of innovative transportation 
tools. Uncertainty around funding for one of the two existing dedicated 
Federal funding sources for technology deployment fundamentally 
undermines state and local efforts to modernize our Nation's 
transportation infrastructure while sending the wrong message to 
industry about investing in innovative transportation solutions for 
American markets.

 SMART Grants and Local Innovation: As you noted in your statement 
for the record, the City of Bellevue, Washington, used a SMART grant to 
deploy adaptive traffic signals designed to better protect pedestrians, 
bicyclists, and wheelchair users. The pilot resulted in a significant 
reduction in near misses between vehicles and people.

 Question 1. How have partnerships with local communities helped 
your members pilot their technologies?
 Answer. Local communities, as the owners and operators of 
infrastructure and transportation services, play an important role in 
deploying transportation technologies. Local governments can be hubs of 
innovation and can be microcosms for smart city efforts before the 
technologies scale more widely.
 Local governments also look to one another to pilot new innovations 
and share successes and lessons learned. Other small or mid-sized 
cities can look to communities like Bellevue as examples of 
transportation innovation and jumpstart their own use of transformative 
technologies.
 Notable partnerships between the autonomous shuttle provider Beep 
and cities such as Jacksonville, Florida, or Atlanta, Georgia are 
leading the way for expanding access to transportation services to 
those who need it most and for piloting new innovations. The successes 
here in individual communities can spur broader deployment successes in 
communities across the Nation.

 Question 2. Do local governments provide an important testing 
ground for transportation innovation?
 Answer. Yes, local governments, as well as state governments, 
provide an important testing ground for transportation innovations. 
Pilot projects, such as those in Bellevue, play a significant role in 
demonstrating the value and viability of technologies. Local 
communities also differ in their needs, road and transit conditions, 
geographies and populations, allowing them to showcase a diversity of 
technology applications across jurisdictions.
 Importantly, many of these local testing efforts have demonstrated 
that technologies are proven tools and merit scaled deployments across 
multiple jurisdictions, rather than ending at the pilot stage at an 
individual intersection, corridor or other limited-scale pilot. These 
ITS solutions provide system-wide benefits if funded and prioritized.

 Technology to Lower Costs and Improve Freight Mobility: At a time 
when American families, farmers, and businesses are facing an 
affordability crisis, the President's latest budget request cuts 
funding for major freight and innovation investments. These grants fund 
projects like providing real-time information about parking 
availability and truck parking along the I-5 corridor in Washington.

 Question 1. How do transportation technology investments translate 
to making the lives of Americans more affordable and safer? How 
important is long-term funding certainty for communities seeking to 
deploy transportation technologies?
 Answer. Investments in transportation technology can reduce the 
likelihood of vehicle crashes, pedestrian injury or death, and make the 
overall roadway environment safer. With crashes costing our economy 
$800 billion per year, this directly translates to cost savings for 
consumers. Proactively preventing costly crashes or other incidents 
lowers costs for all Americans. Technology, such as vehicle 
connectivity, automated driving systems, and intelligent intersections, 
can save lives on the road--for both those in a vehicle and outside the 
vehicles.
 Additionally, traffic congestion costs the average commuter $1,500 
per year. Investing in our digital infrastructure, such as smart 
signals, advanced traffic management systems (ATMS), artificial 
intelligence-powered tools, and other solutions, can improve throughput 
at intersections, on major highways, and on other arterial roads. These 
tools can help cities adapt to traffic conditions in real-time, provide 
alternative routes for motorists, and make data-informed decisions 
about their system. When there is less traffic, productivity improves 
and people can access goods, services, and employment more seamlessly. 
Moreover, with less congestion on the road, goods reach our homes 
quicker and freight costs are lower. We can significantly reduce costs 
for Americans writ large scaling ITS solutions to reduce crashes and 
congestion on our roadways.
 However, communities need certainty that funding for these 
technologies will be available year-after-year in order to have to 
confidence to deploy a new technology solution, and that their 
technology projects will be eligible for Federal funding, both formula 
and discretionary grants. A local agency would not build a road if it 
did not have confidence that the funding for such a project would be 
available in its entirety to see the project through completion. The 
same calculation applies for technology deployment. Certainty and 
prioritization for technology funding in surface transportation 
reauthorization is necessary for agencies to confidently invest in 
technology tools to improve safety, mobility, and overall 
transportation operations.

 Technology to Protect Roadside Workers: Every year, roadway 
workers, utility crews, and first responders are injured or killed 
while working near traffic. New connected vehicle technologies offer 
opportunities to alert drivers to workers ahead and reduce these risks.

 Question 1. What technologies are available today to help protect 
workers in roadway work zones?
 Answer. Digital alerting technologies are one of the key tools 
being used today to help protect workers in work zones. Digital 
alerting uses vehicle-to-everything (V2X) technology to send real-time 
notifications to drivers' navigation apps and in-dash systems when 
approaching active construction areas. This can prevent crashes from 
traffic queues, lower speeds, and make drivers more aware of their 
surroundings.
 A study in Illinois showed that digital alerting technologies 
increased driver reaction distance 4x more than just emergency lights 
and led to reduced harsh braking compared to when there was no digital 
alert. This translates into safer driver behavior near emergency 
vehicles, queuing traffic, and roadside workers--reducing the chance of 
a collision.
 Smart work zone systems can adjust speed limits dynamically around 
work zones and can help reroute traffic in the event that a work zone 
shifts locations, or an incident occurs within a work zone. The Work 
Zone Data Exchange (WZDx) shares real-time work zone data with 
navigation systems and connected vehicles to improve driver awareness. 
There are projects now, including one led by a University 
Transportation Center in Maryland, that are testing technology 
solutions such as smart vests for roadside workers that vibrate when a 
vehicle is approaching at high speeds or providing workers with audible 
alerts when there is a hazard.\1\ Maryland is also using SMART grant 
funding to demonstrate how drones can be utilized along sensors to 
improve safety outcomes for road workers and other road users, 
demonstrating further the importance of this critical technology 
program.\2\
---------------------------------------------------------------------------
 \1\ Morgan State University's SMARTER Center Utilizes LiDAR 
Technology to Study Dangerous Intersections and Monitor Highway Road 
Conditions
 \2\ https://roads.maryland.gov/mdotsha/pages/
pressreleasedetails.aspx?PageId=818&newsId
=4975
---------------------------------------------------------------------------
 ______
 
 Response to Written Questions Submitted by Hon. Gary Peters to 
 Laura Chace
 Question 1. Following up on your response on the greatest barriers 
for advanced technology adoption, I also agree that none of these 
groundbreaking technologies would be accessible to state and local 
agencies without robust and predictable Federal funding. Continued 
funding for research, design, and implementation across the technology 
life cycle is critical in helping scale these impactful technologies 
across communities throughout the U.S. Can you elaborate on the 
importance of increasing topline funding for technology-enabling DOT 
programs, and the potential risks of scaling back these investments?
 Answer. As we confront multiple challenges in the U.S. 
transportation system, we should be elevating the use of technology 
adoption to solve some of our hardest transportation problems by 
establishing direct and dedicated Federal funding sources for 
technology deployment, including through formula programs.
 Other countries make transportation technology a matter of national 
strategy and prioritize funding it--and the U.S. should be no 
different. Without dedicated funding for our transportation digital 
infrastructure, the U.S. risks ceding transportation leadership to 
adversaries like China and further risks missing our safety, 
efficiency, and mobility goals. Scaling back investments now would send 
the wrong signal to the private companies who want to develop and 
invest in the U.S. but need strong Federal leadership and an 
established marketplace. Without this established marketplace, we risk 
American technology bring deployed overseas by adversaries and letting 
countries like China win the global transportation technology race.
 Funding for programs such as the ITS Joint Program Office, Office 
of Research and Technology, SMART grants, ATTAIN grants, and other 
technology-enabling programs at USDOT should remain stable from IIJA 
levels or increase given the importance of technology to our 
transportation system today. Additionally, given the recent funding 
reallocation from the SMART grant program, we urge Congress to ensure 
that SMART is provided more funding certainty in the next surface 
transportation reauthorization by either including it under the Highway 
Trust Fund or advance appropriating funding for the program.

 Question 2. In your testimony you call for a Federal privacy 
standard to address concerns on the use and collection of sensitive 
personal data--can you expand on that recommendation? Are there 
existing privacy protections being adopted by your members?
 Answer. ITS America published recommendations for a national data 
privacy law, particularly as it pertains to the transportation 
sector.\3\ We continue to advocate for a national data privacy law that 
protects consumer privacy and personal information, while ensuring that 
we can continue to innovate and use appropriate data sources in a way 
that improves safety, efficiency, and mobility outcomes in 
transportation. A patchwork of state and local data privacy laws 
hinders the ability for the effective widespread use of life saving 
technology that relies on accurate data.
---------------------------------------------------------------------------
 \3\ ITS-America-Privacy-Policy-Recommendations-1.pdf
---------------------------------------------------------------------------
 Any Federal standard for data privacy must preserve the ability of 
organizations to collect, use, process, and share transportation data 
that will provide broader societal benefit to consumers and 
communities, such as reducing vehicle crashes, reducing vulnerable road 
user injury and death; lowering traffic congestion and increasing 
efficiency; improving traffic management operations; transportation 
safety research; and more.
 In 2025, ITS America published privacy principles to guide the 
development, deployment, and regulation of advanced technologies in 
surface transportation. This includes core privacy tenets that our 
members and other organizations should follow, as well as recommended 
actions organizations should take to protect consumer privacy. For 
example, this includes developing policies that limit data collection 
to only what is necessary to achieve a product or service's goals; 
conducting regular privacy audits to ensure ongoing compliance with 
applicable laws and best practices; incorporating privacy 
considerations into the design of new products; implementing robust 
consent management systems; and more.

 Question 3. Similarly, for cybersecurity, what steps are being 
taken by your members currently that ensure a sufficient minimum level 
of cybersecurity protection? What steps can Congress and the 
administration take to support best cybersecurity practices?
 Answer. Our members adhere to applicable federal, state, and local 
guidelines and best practices with respect to cybersecurity. State and 
local agencies are taking steps to manage risks every day, while 
American industry continues to invest in cutting-edge technologies that 
better secure our infrastructure from threats.
 ITS America continues to develop resources to support our members 
in the realm of cybersecurity through our Cybersecurity Community of 
Practice. We continue to support secure-by-design principles for ITS 
and our infrastructure, zero-trust architecture, and robust cyber 
incident response planning.
 Congress could take steps to encourage further collaboration 
between Federal agencies such as USDOT and the National Institute of 
Standards and Technology (NIST) to promote cybersecurity best practices 
in transportation, share resources, and ensure that Federal 
transportation funds are being used to bolster State and local 
transportation cybersecurity activities. Congress should additionally 
invest in training and capacity building for cybersecurity in 
transportation, potentially including through supporting the creation 
an Infrastructure Information Sharing and Analysis Center (ISAC). 
Dedicated funding for cybersecurity modernization would also be an 
appropriate area of consideration to fully bolster the defenses of our 
critical infrastructure from hostile interference attempts.
 Finally, Congress can and should ensure that there is a pathway for 
state and local transportation agencies to procure modern cybersecurity 
solutions to protect the infrastructure they manage. Recent Build 
America Buy America (BABA) rules around domestic content for 
manufactured products are poised to significantly limit what solutions 
these agencies can provide, as critical components like chips are not 
produced in sufficient scale domestically to meet the security needs of 
our critical infrastructure solutions. While ITS America and our 
members are aligned with Congress and Federal regulators on the 
priorities of BABA, we must ensure that the approach we utilize does 
not undermine our equally important priorities of ensuring the safety 
and security of American infrastructure assets.
 ______
 
 Response to Written Questions Submitted by Hon. Tammy Duckworth to 
 Laura Chace
Prioritizing Accessibility in Surface Transportation Reauthorization
 Question 1. With the upcoming expiration of the bipartisan 
Infrastructure Investment and Jobs Act, please explain ITS America's 
position on the importance of prioritizing accessibility in the next 
surface transportation reauthorization.
 Answer. ITS America supports legislative efforts to improve 
accessibility for transportation users and agrees with the importance 
of ensuring broad access to mobility options for all travelers. We 
particularly encourage Federal support for technologies that will 
improve accessibility and the safety of all road users. These 
technologies include, for example, smart intersection technology that 
can hold crosswalk times longer for pedestrians (particularly those 
with mobility challenges), technologies that help vehicles detect and 
respond to vulnerable road users, and many more tools. Congress should 
meaningfully prioritize investments in transportation technologies so 
that states and cities have a broad set of tools at their disposal to 
improve safety, lower congestion, and increase access to mobility. We 
also support public agencies using their procurement power to ensure 
that mobility options, whether transit or otherwise, serve all 
populations when contracting with private sector companies for 
services.
Innovations for Safety and Accessibility
 Question 1. Innovation can decrease the high rates of pedestrian 
deaths and injuries, specifically for travelers with disabilities.

 A. Would ITS support the collection and sharing of data on 
pedestrian crashes, including on crashes involving people with a 
variety of disabilities and mobility aids, such as wheelchairs, walkers 
and service animals?
 Answer. ITS America does not have an official policy position on 
this subject at this time, but we would be happy to work with your 
office and discuss this issue more in-depth.

 B. What solutions are ITS America members pursuing that would 
increase the safety of pedestrians with disabilities? For example, are 
members committed to increasing accessibility of streets through safer 
crosswalks and public rights of way, or ensuring vehicles can detect 
and respond to pedestrians using mobility aids?
 Answer. One key example of our members using technology to improve 
pedestrian safety is smart intersection detection technology. These 
tools are used at intersections to detect pedestrians, with or without 
disabilities, who may need more time to cross the street. These tools 
can then hold traffic lights and extend crossing times so that the 
individual(s) may cross safely. These tools typically rely on a 
combination of artificial intelligence software, camera, LiDAR, and 
other sensing technologies.
 USDOT's SMART grant program has already funded work in this space, 
and one grant in Texas developed and tested a smartphone application 
for use by blind/low-vision (B/LV) individuals to use to navigate smart 
intersections. This grant also deployed technology that alerted 
pedestrians and bicyclists using crosswalks and bike lanes of turning 
buses through an audible message and an illuminated outline of a bus 
above the pedestrian sign--both helping pedestrians with audio/visual 
impairments.
 Several of our members are also investing in wayfinding solutions 
in transit and rail stations that leverage innovative technologies. 
These are particularly helpful for persons with mobility challenges but 
also all riders.
 We continue to support and strongly encourage further investments 
in technology solutions that can improve safety for all road users.

 C. What policy solutions does ITS America believe would be most 
valuable to ensure innovation in transportation infrastructure best 
serves all individuals?
 Answer. Innovation in transportation should serve all individuals 
regardless of ability, and there are many technology solutions 
available today that can improve safety, accessibility, and overall 
mobility. We strongly urge the recognition of technology as core 
transportation infrastructure (i.e., digital infrastructure) given its 
outsized benefits and impact on our transportation system in totality. 
Sometimes, technology solutions address mobility challenges for persons 
with disabilities in a way that a physical infrastructure modification 
cannot be solved. Treating technology as core infrastructure allows 
agencies to better determine what solution or set of solutions should 
be applied to meet the specific mobility challenges they are trying to 
solve, rather than being limited by the technology solutions that are 
or are not eligible and funded.
 Dedicated funding for transportation technology would be incredibly 
valuable to state and local transportation agencies that are looking to 
make improvements to their transportation system in innovative ways. 
Additionally, there should be strong Federal support for workforce 
development efforts in ITS, research, planning, and cybersecurity. The 
SMART grant program, which has invested in technology solutions that 
improve transportation access and safety, should be reauthorized and 
funded.
Autonomous Vehicles (AV)
 Question 1. One of ITS America Standing Advisory Committees focuses 
on Automated Vehicles. AVs have the potential to increase mobility for 
older Americans and travelers with disabilities. Despite the potential, 
the initial deployment of AVs has too often left communities behind, 
particularly individuals with disabilities. Please detail how ITS 
America is using its position to advance the use of AVs for travelers 
with disabilities.

 A. How is ITS America working to proactively ensure AVs and other 
technological innovations meet the needs of all transportation users?
 Answer. ITS America works closely with our members across the 
transportation ecosystem to improve transportation services for all 
users--including those with mobility challenges. Our member committees 
and working groups discuss ways in which technological developments in 
ITS can meet the growing needs of communities across the country. We 
have previously partnered with organizations such as AARP and 
Autonomous Vehicle Alliance (now the Future Mobility Collaborative) on 
accessible and barrier free transportation research and continue to 
work with our members and partner organizations to advance innovations 
that benefit all transportation users.

 B. Please detail ITS America's position on incorporating 
accessibility as a key pillar to any Federal framework on AVs, 
particularly regarding ITS America's efforts to promote manufacturer 
initiatives that ensure AVs are accessible and readily available for 
riders with disabilities to use--independently--as a reliable mode of 
transportation.
 Answer. ITS America's AV Framework includes accessibility as a key 
pillar, and we know that AVs are an option that can improve access to 
mobility for those who cannot drive themselves or lack alternative 
transportation methods. Federal policies that support the safe scaling 
of AVs across the country should include accessibility as a key 
component and address a wide variety of mobility needs. In our AV 
Framework, we called for policies that would not prevent unlicensed 
individuals from using Level 4 or 5 automated vehicles and have 
supported AVs with innovative designs or purpose-built vehicles that 
are intended to support a wide variety of users.

 Question 2. To ensure people with disabilities benefit from AVs, 
the vehicles must accommodate passengers who remain in their 
wheelchairs, and the human machine interface (HMI) must be accessible 
for people with a wide range of disabilities, including para- or 
quadriplegic individuals and riders who are blind, deaf or who have 
intellectual disabilities.

 How is the AV industry ensuring wheelchair users and people with 
disabilities can request rides and/or ride in AVs safely and 
independently through accessible HMIs?
 Answer. AV technology can bring transformative benefits and create 
new mobility options for people with disabilities. The AV industry is 
seeking to create an inclusive transportation service by incorporating 
accessibility features designed to support those with low-vision, 
blind, deaf, or mobility challenges. Many of our members are also 
committed to further enhancing the applications, products, and services 
offered to align with the needs of communities with disabilities. It is 
important that accessibility is carefully engineered into AV operations 
to support a wide range of mobility needs.
 One of our member companies, Beep, is investing in the development 
of features to support accessible voice-activated systems, telephonic 
and live agent support, and on-board interactions. In the instance of 
Beep, along with many other AV providers, trained remote supervisors 
will monitor fleets in real-time and can intervene when a passenger 
with a disability needs assistance, providing verbal guidance or even 
coordinating with ground personnel in the case of AV transit or shuttle 
service. In the case of Beep, tactile or visual alert options are also 
a feature that provides all types of riders with options to contact an 
operations center without relying on voice.
 The NAVI program from ITS America member Jacksonville 
Transportation Authority is ADA-compliant, with automated vehicles 
equipped with boarding ramps and wheelchair securement systems 
providing riders with disabilities the same level of service as other 
passengers, with the same schedule, and same independence.
 We welcome further engagement with the Committee on this issue and 
are committed to working with our members on ensuring wheelchair users 
and people with disabilities can request rides and ride in an AV 
safely.

 Question 3. For wheelchair users to use AVs independently, there 
must be a universal autonomous wheelchair securement system.

 A. Please describe how ITS America is helping ensure industry is 
investing in research and development to create and bring to market 
universal wheelchair securement systems for AVs.
 Answer. ITS America is supporting the deployment of AVs to bring 
more access to transportation options for those with mobility 
challenges. Our member organizations, including AV companies and 
research universities, are actively working to strengthen accessibility 
for its vehicle riders, including through universal wheelchair 
securement systems and strategic partnerships with disability advocacy 
organizations. Efforts such as the Universal Docking Interface Geometry 
(UDIG) are breakthroughs for bringing wheelchair securement systems to 
market.

 B. The University of Michigan Transportation Research Institute 
(UMTRI) is one of your members. Researchers at UMTRI have designed a 
universal securement system. To date, has ITS America supported this 
research and bringing this technology to market, through resources or 
funding? If not, will you commit to helping bring a universal 
securement system to market so that people in wheelchairs can 
independently use AVs?
 Answer. ITS America supports continued efforts from AV companies, 
service providers, and researchers to develop and deploy tools that 
help secure wheelchair users in autonomous vehicles. We continue to 
support all our members' research, including the research you are 
referencing being carried out by UMTRI, to improve transportation 
accessibility.

 C. Has ITS America partnered with the SecureRide Coalition, which 
brings industry, advocates and researchers together with the goal of 
universal wheelchair securement? If not, will you commit to partnering 
with the SecureRide Coalition?
 Answer. ITS America has not formally partnered with the SecureRide 
Coalition to date, but many of our members--including AV companies and 
research universities--are active supporters and partners of 
SecureRide. We look forward to exploring ways to work with SecureRide 
in the future as well as other coalitions supporting greater 
accessibility in transportation.

 Question 4. For travelers with disabilities to safely utilize, 
enter and exit an AV the surrounding infrastructure must be accessible. 
When data are collected through mapping or other means, AV service 
providers and government entities could collect and share 
infrastructure accessibility information, including areas where pick-
ups and drop-offs may be unsafe, or where there are curb cutouts or 
ramps. This data could then be used to identify necessary improvements.

 Does ITS America support collecting and sharing this data, 
including using this data to guide the AVs to accessible pickup and 
drop-off locations?
 Answer. Data collection to identify accessibility information about 
infrastructure is crucial for public agencies to make informed planning 
decisions and enact safety measures that support greater access to 
transportation. ITS America supports strong partnerships between 
government entities and AV providers to promote safe and accessible 
transportation in an AV, including ways to improve pick-up and drop-off 
locations for passengers with disabilities, and identify other 
infrastructure elements that may be unsafe for AV riders with 
disabilities.
 Additionally, we see these components fitting under a ``complete 
trip'' framework to ensure that riders can utilize a continuous journey 
from an origin to a final destination across all transportation modes 
used--the data you are referencing is a key enabler of that framework.

 Question 5. Disability advocates have expressed privacy concerns 
around AV use. What solutions or policies does ITS America support to 
protect the privacy rights of AV riders by ensuring passengers' health, 
disability status and locations visited are not shared or used for 
commercial or tracking purposes?
 Answer. ITS America strongly agrees with the need to protect 
consumer privacy, including the privacy of AV riders. We believe this 
is a broader policy question around a Federal data privacy standard 
rather than a technology-specific issue related to AV use, however. We 
have called for a national data privacy law that protects individual 
privacy while continuing to support innovation in the transportation 
sector. Such a privacy framework should ensure that individuals know 
whether a company is collecting, using, or sharing their personal 
information, allow individuals to modify or withdraw consent for the 
collection of identifiable information, allow for individuals to opt-
out of data collection and processing to the extent feasible for that 
transportation service, and provide information on what categories of 
data are collected and processed by a company or service provider.
Technology to Support Paratransit Improvements
 Paratransit provides a travel option for many people with 
disabilities who cannot rely on public transit. However, several issues 
with paratransit undermine its utility as an effective and efficient 
mode of transit for riders with disabilities. For example, if a 
passenger needs to drop a child off at daycare, pick up a prescription 
or stop at a bank, they are forced to book two separate, independent 
trips.
 Paratransit scheduling also has strict windows; a ``quick'' errand 
can result in a rider waiting up to 90 minutes for their second ride. 
Additionally, paratransit services often use outdated methods for 
dispatch and routing, with riders unable to track the status of their 
rides and length pick-up windows. Most services also do not allow 
riders to book same-day services.
 Ms. Chace, your written testimony noted:

 ``Providing timely and safe access to transportation options 
 remains a challenge in many communities. Research shows that 
 millions of medical appointments are missed annually due to 
 inadequate transportation options.''

 Question 1. Please detail innovations that ITS America members are 
pursuing to improve paratransit, including addressing the problem of 
excessive wait times.
 Answer. Our members are working to address issues facing 
paratransit operations and deploying technology to help optimize 
services for riders. Many in the industry have found that automated 
dispatching, dynamic scheduling optimization, real-time vehicle 
tracking, and arrival notification systems can materially improve 
paratransit productivity and reduce rider waiting time. Technology can 
dynamically adjust for no-shows, traffic delays, or cancellations.
 Cities are also investing in autonomous shuttle services that can 
improve paratransit services by providing transit agencies with more 
capacity. Other members have explored partnerships with transportation 
network companies (TNCs) such as Uber and Lyft to supplement 
paratransit services.\4\ Moving to app-based booking platforms and 
cloud-based services can also improve rider experience.
---------------------------------------------------------------------------
 \4\ Mobility on Demand (MOD) Sandbox Demonstration: Pinellas 
Suncoast Transit Authority (PSTA) Public-Private-Partnership for 
Paratransit Evaluation (Report 0213) | FTA

 Question 2. Would ITS America support a ``one-stop'' pilot program 
to help paratransit riders avoid excessive wait times between multiple 
trips; streamline the process for submitting accessibility complaints; 
and assist local communities with identifying gaps in transportation 
accessibility?
 Answer. ITS America strongly supports the use of technology to help 
improve paratransit accessibility and the ease of trip planning and 
travel. Technology and data have the power to improve wait times, 
provide real-time information to riders, and streamline complaint 
processes. ITS America would be open to supporting this type of program 
and would welcome an opportunity to discuss details further with your 
office, particularly about how such a program could align with the 
ongoing work being done on this subject by FTA and USDOT's ITS Joint 
Program Office.
 Broadly speaking, providing more dedicated funding to states and 
cities for transportation technology will help give communities the 
resources they need to invest in innovative solutions, upgrade and 
operate their system, and strengthen outcomes for transit riders of all 
kinds.
 ______
 
 Response to Written Questions Submitted by Hon. John Hickenlooper to 
 Laura Chace
Interoperable V2X Digital Infrastructure
 In the hearing, you highlighted an analogy in which you compared 
standalone computers to the power of the connected internet. In 
Colorado, our Department of Transportation has pioneered regional 
Vehicle-to-Everything (V2X) and connected vehicle data sharing 
especially along our mountain corridors. You also noted that these 
deployments across the country can still be frustratingly fragmented.

 Question 1. What are the primary constraints stopping us from 
scaling successful regional mountain-corridor pilots into a truly 
interoperable, national digital infrastructure?
 Answer. V2X solutions hold the promise to significantly improve 
transportation safety and mobility outcomes for all road users by 
providing instantaneous alerts and information to drivers about 
imminent hazards and other road conditions. They represent an important 
component of the broader digital infrastructure ecosystem ITS America 
has been advocating for throughout this surface transportation 
reauthorization process. There are three main constraints that hinder 
scaling of these solutions: lack of a national strategy for 
transportation digital infrastructure, absence of clear 
interoperability standards, and lack of sufficient levels of dedicated 
Federal funding. All three of these barriers must be addressed to scale 
digital infrastructure solutions.
 A comprehensive, national strategy for digital infrastructure is a 
critical element of evolving from fragmented pilots of disparate 
technologies into an inoperable national network of meaningful 
technology deployments. ITS America commends the work being done to 
help build out this strategy by USDOT, particularly USDOT's Office of 
Research and Technology, the ITS Joint Program Office and contributors 
from numerous USDOT modes, but Congressional support is a necessary 
enabler of those efforts moving forward. Providing focus and funding 
support in the upcoming surface transportation reauthorization process 
will be a significant element of fully leveraging digital 
infrastructure solutions across the United States transportation 
system.
 Data does not recognize jurisdictional lines, making 
interoperability essential for scale. Congress and USDOT can accelerate 
interoperability by setting clear national standards for data exchange 
and system interfaces, while supporting open architectures that allow 
systems across states and modes to communicate seamlessly.
 Additionally, Federal support for the deployment of technology 
solutions like V2X (and digital infrastructure solutions more broadly) 
must be treated by Congress with the same seriousness that we provide 
to the rest of our transportation infrastructure assets. Previous 
surface transportation authorization bills made incremental progress to 
ensuring United States leadership in transportation and infrastructure 
innovation. However, direct spending on transportation technology was 
only one tenth of one percent (0.1 percent) of the total surface 
transportation funding authorized in the Infrastructure Investment and 
Jobs Act (IIJA). In contrast, technology modernization investments in 
the recent FAA reauthorization bill were close to 15 percent of the 
total funds authorized. Additionally, while the discretionary grant 
programs included within IIJA are helpful for demonstrations and early-
stage technology development, they are often limited in both size and 
scope. Transportation agencies need certain and dedicated funding over 
a multi-year timeline so that they can properly plan for and deploy 
technology into their systems at scale. In this next surface 
reauthorization, the U.S. must adequately fund transportation 
innovation, and reap the safety, mobility, and economic benefits of 
investing holistically in technology.
 Finally, in regards to V2X specifically, ITS America strongly urges 
USDOT to republish its Saving Lives with Connectivity: A Plan to 
Accelerate V2X Deployment, an official national deployment plan for V2X 
which was taken down in early 2025. This will greatly help incentivize 
and accelerate V2X deployment.

 Question 2. On a similar note, how can the next Surface 
Transportation Reauthorization better incentivize states to treat 
digital technology as a core funding priority?
 Answer. The next Surface Transportation Reauthorization has the 
opportunity to define transportation digital infrastructure in law, 
which provides significant weight and sends a strong signal from 
Congress that technologies are core to the transportation system. H.R. 
8870 (BUILD America 250 Act) already does this.
 Additionally, the next reauthorization should fund technology in a 
similar way that it does physical infrastructure--by dedicating certain 
funding toward it so that states and local governments can rely on 
yearly, predictable funding for technology that will make safety 
improvements, support traffic management, upgrade cybersecurity, and 
provide greater access to mobility.
 Congress can provide clear funding eligibility, stable funding 
pathways, and support for innovative procurement methods that will help 
States invest in technology. This includes strong technology 
eligibility in formula programs, reauthorizing key technology grant 
programs (i.e., SMART and ATTAIN) and expanding opportunities for 
states and cities to use Federal funding for these types of digital 
improvements.
 Congress should treat technology as core transportation 
infrastructure, which fundamentally changes how states plan, fund, and 
deploy it, moving technology from an add-on to a default part of how 
projects are delivered.
 Today, technology is often treated as a pilot or an optional 
enhancement after a project is designed. When it is considered core 
infrastructure, it is included during planning and project development 
from day one--similar to how pavement, concrete, and other safety 
features are considered.
 Second, it becomes a lifecycle investment, not a one-time purchase. 
Digital infrastructure requires ongoing operations, software updates, 
and data management--rather than simply installation. Treating it as 
core infrastructure allows states to plan for those full lifecycle 
costs, rather than trying to fit them into capital-only funding models 
that were designed for construction.
 Third, it reduces risk and normalizes adoption across states. When 
Federal policy clearly signals that technology is a standard, eligible, 
and supported investment, it removes the uncertainty that currently 
slows deployment. That makes agencies more comfortable moving from 
pilots to scaled deployment and from isolated projects to system-wide 
strategies.
 ______
 
 Response to Written Questions Submitted by Hon. Maria Cantwell to 
 Cole Scandaglia
 Federal Funding for Infrastructure and Technology: According to the 
American Society of Civil Engineers, cutting transportation funding 
below the level passed under the Bipartisan Infrastructure Law could 
cost the average American family an estimated $700 a year.

 Question 1. Do you support continuing the investments in our 
transportation infrastructure made under the Bipartisan Infrastructure 
Law?
 Answer. Yes. The BIL made historic and deeply overdue investments 
in our Nation's infrastructure. We know that investment in 
infrastructure has a multiplier effect economically. We also know that 
the longer we defer critical infrastructure maintenance, the more 
costly those things will be down the road. We absolutely support IIJA 
or higher funding levels in the next surface bill--critically including 
substantial advanced appropriations.

 Training to Prevent Deskilling: In the aviation industry, we've 
seen how important it is for pilots to maintain their core skills as 
the cockpit becomes more technologically advanced. As assistive 
technologies enter other modes of transportation, it's important that 
we focus on training to prevent deskilling.

 Question 1. Are railroads and trucking companies providing the 
right training to their workers to maintain skill as they introduce 
technologies like Positive Train Control and route assistance to the 
cabs of locomotives and trucks?
 Answer. In the rail industry, continued reliance on technologies 
like trip optimizer or ``Zero to Zero'' which removes decision making 
authority from a locomotive engineer for substantial percentages of a 
trip creates serious deskilling risks. This risk is exacerbated by the 
fact that railroads penalize locomotive engineers through discipline 
and threat of firing who don't follow the prompts from these software 
systems 95 percent or more of the time, even when the software prompts 
are wrong or would lead to safety risks. In the event of unexpected 
circumstances or technology failure an engineer may be required to 
assert control of the locomotive with little to no warning. An engineer 
who performs reduced manual operations on a day-to-day basis may suffer 
from an atrophy of skills in that scenario, which could have disastrous 
results. The loss of familiarity with operations over components of 
certain territories also presents serious risks in an emergency. The 
Teamsters endorse requiring a set time of each trip be conducted in 
manual operation to avoid these scenarios.
 In trucking, we have similar concerns. While route assistance/
guidance systems can be a helpful additive technology to drivers, they 
cannot substitute for the experience and knowledge of a professional 
driver. It is critical that companies do not require strict and 
unquestioning adherence to these systems under threat of discipline or 
termination, particularly when the experience of a driver on his or her 
route or area may be superior.

 Wayside Detectors and Railway Safety: Following the Norfolk 
Southern derailment in East Palestine, investigators found that a 
wayside detector identified the overheated bearing, but the warning 
came too late to prevent the accident. My Railway Safety Act would 
require the use of defect detector technology.

 Question 1. How can the technologies in the Railway Safety Act 
protect communities and workers and prevent the next East Palestine?
 Answer. The Railway Safety Act's requirements for the regulation of 
wayside detectors is critical, and an example of the correct way to 
address railroad safety. Currently, and prior to East Palestine, 
railroads are permitted to make all decisions on regarding the use of 
wayside detectors--where they are installed, how they are maintained, 
and how information is provided to frontline workers. East Palestine 
showed us both how that technology can help avoid tragedy, but also how 
allowing total authority over the use of the technology by the 
regulated entity will only end in disaster. We commend Ranking Member 
Cantwell for leading the Railway Safety Act and continue to call for 
its adoption into law in the strongest possible terms.

 Workforce Implications: There are over 34,000 truck drivers in the 
state of Washington. According to the American Trucking Associations, 
truck driving is one of the top five occupations in 30 states. While I 
do not anticipate autonomous vehicles will take over these roles 
overnight, I do think Congress needs to consider the significant 
implications this technology could have on those state economies.

 Question 1. What steps do you think Congress should take to address 
the workforce implications associated with autonomous commercial 
vehicles?
 Answer. In the immediate term, we should reject the narrative that 
a qualified driver is unneeded behind the wheel of a truck simply 
because a manufacturer claims they can operate that way. No commercial 
driver should ever be removed from a vehicle whose performance and 
operations are subject to no specific regulations on the technology.
 We should also dispense with the notion that if displacement occurs 
it will be restricted to certain industry needs or subsectors, or that 
commercial autonomous vehicles will simply fill the void left by 
(falsely) purported ``driver shortages''. The idea that employers could 
have the ability to eliminate labor costs and will choose not to do so 
does not survive the barest scrutiny.
 In the event of displacement and given the scope of the industry it 
would be essential Congress acts in advance of impacts. This response 
should be developed, in conjunction with professional drivers before 
any meaningful displacement occurs. We express deep skepticism that a 
future with substantial commercial AV development is likely to create a 
similar number, or quality, of jobs as an inherent symptom of 
introduction of new technology.

 Safety Cases and Checklists: I am concerned that even if well-
intentioned companies treat AV safety cases as living documents, 
regulators and bad actors will view them as simple checklists.

 Question 1. How can we ensure that autonomous truck companies 
continually work to improve safety?
 Answer. Placing faith in corporations to self-monitor and self-
improve their product, particularly in the transportation sector, only 
invites risk. We continue to call on Congress to develop a 
comprehensive and prescriptive regulatory framework which addresses 
both premarket and operational authority issues relating to the 
deployment of commercial autonomous vehicles.

 Question 2. How can Congress ensure that AV safety is more than a 
checklist?
 Answer. In legislation concerning autonomous vehicles, Congress 
should require the creation of actual standards capable of measuring 
performance and operational safety by which the claims of manufacturers 
and operators can be compared to. In lieu of such requirements, the 
Federal government is fully reliant on an unacceptable self-
certification regime, for which agencies would have no ability to 
evaluate.

 Need to Enforce Safety Rules to Create Credibility for Technology: 
The Federal Railroad Administration (FRA) recently released its annual 
enforcement report showing that FRA inspectors recommended violations 
19 percent less frequently than the previous year, despite only a 4 
percent reduction in railroad-reported incidents. Last year, I wrote to 
U.S. DOT concerned about reports of a 98 percent decline in proposed 
pipeline enforcement penalties. And under the Trump Administration, 
fines against hazmat motor carriers have decreased by almost 50 
percent, while violations are down just 3 percent.

 Question 1. Are you concerned that DOT could be directing its 
inspectors to give industry a pass by recommending fewer violations and 
enforcement actions?
 Answer. While we do not have evidence to suggest precisely why 
enforcement actions have decreased, their decrease is deeply concerning 
to our membership. It is certainly not the case that railroads have 
become 19 percent more safe in the last year.

 Question 2. Do you think this lack of enforcement at DOT could 
undermine efforts to integrate safety technology into the system?
 Answer. If DOT agencies are unable, or unwilling, to exert their 
maximum enforcement authorities upon existing operations, it would not 
inspire confidence in the regulation of deployment of new technologies.

 Need for access to data for transparency. During your testimony you 
mentioned that railroaders do not always have access to the same data 
railroads use for decision-making. I previously wrote to the Federal 
Railroad Administration expressing concern over a waiver request from 
the Association of American Railroads that requires railroads to submit 
data to the FRA as part of a waiver to reduce visual track inspections.

 Question 1. Why do railroad workers not always trust data that 
railroads report? Have you documented errors or inconsistencies?
 Answer. Railroad workers don't trust the data the railroads report 
because the railroads are fully in control of the data they collect and 
report and railroad workers do not have access to that underlying data. 
The Federal Railroad Administration for the vast majority of situations 
does not independently collect data and instead relies on what the 
railroads submit to the FRA.
 Additionally railroad workers experience pressure a regular basis 
to not to report safety issues, including derailments and accidents. 
Contrary to the railroads rhetoric on making safety a priority, 
railroad workers are under constant threat of retaliation, including 
discipline and potential termination, if they report safety issues. 
OSHA has documented hundreds of whistleblower complaints from railroad 
workers over retaliation from railroads for reporting safety issues.\1\
---------------------------------------------------------------------------
 \1\ See https://www.osha.gov/news/newsreleases/kansas-city/20260504 
and https://www.fox61
.com/article/news/nation-world/rail-whistleblowers-fired-voicing-
safety-concerns/507-37798495-63ce-4a2e-9995-4e52bd00764a

 Question 2. What has the Teamsters analysis of Class I railroad 
data submitted to the FRA pursuant to the conditions of the waiver to 
reduce human visual inspections by 50 percent found?
 Answer. Under the waiver granted by the FRA in December 2025, 
covered railroads are allowed to reduce visual track inspections by 50 
percent if they submit monthly reports that are meant to ensure that 
they are meeting the conditions of the waivers. BMWED does an analysis 
of these reports when they come in.
 Since implementation of the Federal Railroad Administration's (FRA) 
Automated Track Inspection (ATI) waiver began in March 2026, the ATI 
waiver has expanded rapidly.

------------------------------------------------------------------------
 Railroad Implementation Date
------------------------------------------------------------------------
Union Pacific 3/29/2026
BNSF South 4/5/2026
BNSF North 7/5/2026
CSX 7/5/2026
NS 8/2/2026
------------------------------------------------------------------------

 With the addition of CSX and Norfolk Southern, the waiver now 
encompasses nearly 33 percent of all U.S. Class I track miles, 
including major freight corridors, passenger rail routes, commuter rail 
territory, routes carrying hazardous materials, and some of the 
Nation's largest metropolitan areas.
 CSX's waiver includes heavily populated corridors serving 
Washington, D.C., Baltimore, Philadelphia, New York City, Richmond, 
Boston, Chicago, Nashville, Cleveland, Buffalo, Albany, and numerous 
other major cities.
 Norfolk Southern's waiver territory includes the line through East 
Palestine, Ohio, placing the route affected by the 2023 derailment 
within the reduced visual inspection framework authorized under the 
waiver.
 A review of the railroads' submissions raises several significant 
concerns regarding whether the FRA waiver conditions are being 
satisfied.
 The most significant issue is that none of the railroads provided 
the underlying Track Geometry Measurement System (TGMS) measurement 
datasets required by Condition 1(h) in the waiver. Instead, both 
submissions rely largely on summarized outputs such as movement logs 
and exception reports. Without the full geometry measurement data, 
including gauge, alignment, cross-level, warp, and profile readings, it 
is not possible to verify system performance or determine whether 
defects were detectable at the time of inspection. In practical terms, 
the submissions ask FRA to accept the railroads' conclusions without 
giving reviewers the data needed to test those conclusions.
 Both BNSF and UP's submissions also raise major coverage and 
completeness concerns. The available records indicate that TGMS 
activity was often performed in short or fragmented segments rather 
than in clear, continuous subdivision-level runs. To date it doesn't 
appear that any railroad in a reporting month has tested their entire 
territory
 Key findings from the initial waiver reports for the first month of 
reporting include:

 BNSF South reported 2,560 human-found defects compared with 
 157 ATI defects during the first month of reduced inspections, 
 a ratio of more than 16 human-found defects for every ATI 
 defect identified.

 BNSF North's baseline data reflected 4,159 human-found 
 defects compared with 355 ATI defects.

 Union Pacific reported approximately 610 human-found defects 
 compared with 90 ATI defects during its first month of 
 operation.

 Analysis of the Union Pacific and BNSF submissions 
 identified numerous instances where qualified track inspectors 
 discovered defects after ATI equipment had already traversed 
 the same territory, raising questions regarding claims that ATI 
 provides earlier detection of developing track conditions.

 Both railroads experienced ATI coverage gaps during 
 implementation, requiring FRA monitoring to ensure that reduced 
 visual inspections were not applied where required automated 
 inspection frequencies were not achieved.

 In total, the first-month reports submitted under the waiver 
documented thousands of defects identified through traditional 
inspection methods while ATI systems identified only a fraction of that 
number. These findings are particularly significant because ATI 
performance metrics focus primarily on track geometry conditions and do 
not measure many categories of defects routinely identified through 
visual inspections, including defects involving ties, fasteners, 
joints, switches, crossings, ballast conditions, drainage issues, and 
other critical infrastructure components.
 In total, the first-month reports submitted under the waiver 
documented thousands of defects identified through traditional 
inspection methods while ATI systems identified only a fraction of that 
number. These findings are particularly significant because ATI 
performance metrics focus primarily on track geometry conditions and do 
not measure many categories of defects routinely identified through 
visual inspections, including defects involving ties, fasteners, 
joints, switches, crossings, ballast conditions, drainage issues, and 
other critical infrastructure components.
 The disparity between human and automated defect identification is 
reflected clearly in the railroads' own data:
 BMWED's analysis of BNSF data from the baseline month shows:

 Human inspectors identified 7,142 total defects, including 
 156 geometry defects and at least 42 geometry multiclass drop 
 defects.

 ATI systems identified only 719 total defects, including 
 just 10 multiclass drop defects.
 BMWED's analysis of Union Pacific data from the baseline months 
shows:

 Human inspectors identified 609 total defects, including 15 
 geometry defects.

 ATI systems identified only 35 total defects, including 14 
 multiclass drop defects.
 
 [GRAPHIC(S) NOT AVAILABLE IN TIFF FORMAT] 
 
 
 Performance Based Regulations. During your testimony, you were 
asked about performance based regulations.

 Question 1. What does performance based regulation mean in the 
railroad industry and how would that approach change the way that 
railroads are currently regulated?
 Answer. A performance based regulation approach would be the 
opposite of how the railroad industry has been regulated since it came 
into existence over 150 years ago. For decades, the railroads have had 
to meet specific prescriptive requirements on what they need to do from 
a safety perspective. Those requirements include taking specific 
prescriptive actions on every aspect of the railroads' operations like 
inspections, hours of service limits for train crews, safety 
protections to protect workers working in the railroad right of way so 
they don't get hit from a train etc.
 Performance based regulations means that the railroad industry 
effectively regulate itself. This approach would be devastating from a 
safety perspective and could lead to more East Palestine type 
derailments. Because the railroads collect and control the safety data 
that is submitted to the Federal Railroad Administration, they would 
get to determine the safety performance metrics that they would meet 
and what would define ``success'' in terms of safety. Even if the 
performance metrics the railroads set are forward looking, the 
railroads still would set the safety metrics (derailments/per mile, 
defects per mile etc) that they would consider to be acceptable from a 
safety perspective.
 Based on the railroads' rhetoric, they consider the current level 
of three train derailments a day acceptable even though it means that 
other communities are at risk of an East Palestine type derailment. The 
railroads refuse to implement the operational changes and workforce 
levels necessary to get to zero derailments a day and are willing to 
accept certain level of safety risk in their system even if the 
communities they serve are not. It is a classic case of private 
companies transferring risk to the public in pursuit of profit.
 ______
 
 Response to Written Questions Submitted by Hon. Gary Peters to 
 Cole Scandaglia
 Question 1. Mr. Scandaglia, you discussed the importance of 
Collective Bargaining Agreements when it comes to worker involvement in 
transportation technology adoption. How can Congress best ensure that 
C-B-As are upheld in this area? Are there legislative approaches that 
you believe could reflect the kind of worker input CBAs allow?
 Answer. Within the jurisdiction of this Committee and the drafting 
of a surface transportation reauthorization, the Committee can 
statutorily prefer or prioritize, for example within grant 
applications, scenarios where it can where it can be demonstrated that 
impacted workers support the activity or projector that the recipient 
has negotiated a process with its workforce by which new technology is 
negotiated.
 Additionally, the Committee should broadly require that labor 
organizations are eligible recipients for workforce development and 
training programs, and champion the ability of labor organizations to 
conduct training and development for current and future members.
 However, the most important action Congress can take in this area 
is to ensure that more transportation workers have the ability to join 
a union and secure a collective bargaining agreement in the first 
place. Congress can do so by enacting the Faster Labor Contracts Act. 
The bill would prevent employers from dragging out negotiations 
indefinitely on a first contract for the purposes of busting newly 
organized units. The Teamsters thank Subcommittee Ranking Member Peters 
for being an original cosponsor of the Senate version of the bill, 
S.844. Now that the legislation has passed the House, it is imperative 
that the Senate follow and pass the bill into law.
 ______
 
 Response to Written Questions Submitted by Hon. John Hickenlooper to 
 Cole Scandaglia
Transitioning Workforce in the Automation age
 Mr. Scandaglia, you have reiterated for the committee that driving 
a truck is one of the most common and vital occupations for working-
class Americans across our states. In Colorado, our truck drivers are 
the lifeblood of our mountain and rural economies.
 I'm a big believer that technological innovation should lift 
workers up, not push them out. In the hearing, you noted that extensive 
use of automated systems can risk 'de-skilling' workers in which tasks 
are automated so that they require less human action or judgement to be 
performed.
 This transition often leaves workers unprepared when asked to 
reassert control in a situation where technology fails or an emergency 
presents itself.

 Question 1. Mr. Scandaglia, what concrete steps should Congress and 
industry leaders take right now to invest in workforce training and 
transition programs, ensuring our drivers are fully equipped to assist 
the automated system and manage these advanced technologies rather than 
being displaced by them?
 Answer. As discussed above, Congress should reject the current 
status quo in which manufacturers are able to eliminate a driver from a 
commercial vehicle solely based on their assessment of their own 
technology.
 As deployments are conducted with a driver in the vehicle, it is 
essential that traditional requirements which govern the safety of the 
driver and protect the general public, like CDL requirements, hours of 
service limitations, and drug and alcohol testing continue to apply to 
any individual, in or outside the vehicle, with the capability to 
manipulate its operations.
 In as much as the introduction of new technology modifies existing 
jobs, for example, for a traditional diesel mechanic now asked to 
maintain an AV, Congress should consider financial support for 
workforce development. Currently, the DOT and the Federal Motor Carrier 
Administration oversee extremely limited and fiscally insignificant 
programs which target specifically workforce development for those in 
commercial motor vehicle industry. Such programs are ripe to be 
expanded and further developed in the surface transportation 
reauthorization.
National Security Concerns in Connected Vehicles
 Mr. Scandaglia, your testimony highlighted important national 
security considerations regarding reports that some AV operators have 
utilized overseas personnel to support or manipulate vehicle functions 
on American roads. For a state like Colorado, which hosts critical and 
sensitive military facilities--including NORAD/NORTHCOM, the ADF-C, and 
the NSDC--protecting the security of our physical corridors and 
transportation data is a top priority.

 Question 2. Mr. Scandaglia, as Congress works to establish a 
Federal AV framework, how should it explicitly define the domestic 
chain of custody for vehicle control, and what specific safeguards are 
necessary to guarantee that the operation and data management of 
connected commercial vehicles remain secure and within trusted hands?
 Answer. As it relates specifically to the vehicle and its 
technology stack, we have endorsed the Connected Vehicle Security Act 
(S.4429), which restricts the importation of vehicles and vehicle 
components from countries of concern. It is critical that AVs are not 
able to transmit any kind of data to foreign adversaries, and that 
foreign adversaries are not able to conduct data gathering by virtue of 
placing vehicles on American roads.
 Operationally, Congress must require that any individual who has 
any ability to influence the operations of a vehicle, whether that be a 
remote operator or a remote assistant, is doing so from within the 
United States. The Teamsters were deeply disturbed by recent testimony 
in this Committee from Waymo, in which the company revealed that many 
of its remote overseers are doing so from the Philippines, and call for 
such arrangements to be prohibited.

 [all]