Full text of the official published hearing record. Extracted from the source document — verify against the official record for citation.
[Senate Hearing 119-431] [From the U.S. Government Publishing Office] S. Hrg. 119-431 AMERICA 250: INDUSTRIALIZATION AND THE RISE OF SMALL MANUFACTURERS ======================================================================= HEARING BEFORE THE COMMITTEE ON SMALL BUSINESS AND ENTREPRENEURSHIP OF THE UNITED STATES SENATE ONE HUNDRED NINETEENTH CONGRESS SECOND SESSION __________ MAY 13, 2026 __________ Printed for the use of the Committee on Small Business and Entrepreneurship [GRAPHIC NOT AVAILABLE IN TIFF FORMAT] Available via the World Wide Web: http://www.govinfo.gov __________ U.S. GOVERNMENT PUBLISHING OFFICE 63-970 WASHINGTON : 2026 ======================================================================= COMMITTEE ON SMALL BUSINESS AND ENTREPRENEURSHIP ONE HUNDRED NINETEENTH CONGRESS ---------- JONI ERNST, Iowa, Chair EDWARD J. MARKEY, Massachusetts, Ranking Member JAMES E. RISCH, Idaho MARIA CANTWELL, Washington RAND PAUL, Kentucky JEANNE SHAHEEN, New Hampshire TIM SCOTT, South Carolina CORY A. BOOKER, New Jersey TODD YOUNG, Indiana CHRISTOPHER A. COONS, Delaware JOSH HAWLEY, Missouri MAZIE K. HIRONO, Hawaii TED BUDD, North Carolina JACKY ROSEN, Nevada JOHN R. CURTIS, Utah JOHN W. HICKENLOOPER, Colorado JAMES C. JUSTICE, West Virginia ADAM B. SCHIFF, California JON HUSTED, Ohio Meredith West, Republican Staff Director Sean Moore, Democratic Staff Director C O N T E N T S ---------- MAY 13, 2026 Opening Statements Page Jon Husted, U.S. Senator from Ohio............................... 1 Edward J. Markey, U.S. Senator from Massachusetts................ 2 Witnesses Mr. Edward ``Ned'' Hill, Ph.D., Senior Research Associate, Ohio Manufacturing Institute, The Ohio State University, Columbus, Ohio........................................................... 5 Prepared Statement........................................... 8 Ms. Danielle M. Petrak, Curator, Watts Museum, West Virginia University, Morgantown, West Virginia.......................... 29 Prepared Statement........................................... 31 Mr. Bill Zoeller, CEO, Zoeller Pump Company, Louisville, Kentucky 33 Prepared Statement........................................... 35 AMERICA 250: INDUSTRIALIZATION AND THE RISE OF SMALL MANUFACTURERS ---------- WEDNESDAY, MAY 13, 2026 United States Senate, Committee on Small Business and Entrepreneurship, Washington, DC. The committee met, pursuant to notice, at 2:30 p.m., in Room 428A, Russell Senate Office Building, Hon. Jon Husted, presiding. Present: Senators Husted [presiding], Ernst, Paul, Young, Hawley, Justice, and Markey. OPENING STATEMENT OF SENATOR HUSTED Senator Husted. I would like to call the Committee on Small Business and Entrepreneurship to order. And I am Jon Husted, and I want to thank Chair Ernst for giving me a chance to chair the hearing today, on the Committee on Small Business and Entrepreneurship. It is a special year, 250th year of our Nation, 250th anniversary. And it's not possible to overstate the importance and critical role that small businesses, but in particular, American manufacturing, have played in transforming America into the economic envy of the world. And the underlying principles of free markets, competition, which are so important to our prosperity, that our system of government has enabled over that period of time it. Put simply, manufacturing matters. Growth in manufacturing and the manufacturing sector disproportionately drives new investment in research and development, that drives innovation and productivity. Two words that I use a lot: innovation and productivity. Despite accounting for just 12 percent of the total economy, 55 percent of the total American R&D spending is financed by manufacturers. This productivity can be seen not just in the manufacturing sector, where employers earn 13 percent more than the rest of the private sector, but in the economy as a whole. Manufacturing has one of the largest multipliers of any industry in the United States, with every dollar invested in manufacturing leading to $2.69 of growth in the broader economy. Every dollar in manufacturing wages produces $4.33 in income for the overall economy. Put in simple terms, manufacturing drives new capital investment and innovation, which raises take-home pay for all Americans. It is not a coincidence that manufacturing has thrived in America. Our foundation of free markets, limited government, private property rights, the rule of law, and entrepreneurship have fueled our continued industrial dominance. These values have facilitated the competition and free flow of capital that are essential, for capital investment, innovation and productivity that raise American wages and the standard of living. Importantly, our system of free markets has allowed small manufacturers to thrive. As of 2025, 98 percent of all manufacturing firms in the United States are small businesses with fewer than 500 employees. The American system of freedom and limited government ensure that all small manufacturers can compete on a level playing field. That's what we aspire to with large incumbents, or compete on a level playing field with large incumbents and spur innovation that raises American wages. Throughout our history, Ohio has led the way in American manufacturing. I often say you can't do Made in America without Made in Ohio. And I firmly believe that one of our guests today, Dr. Edward Hill, Ned Hill, as I know him, from the Ohio Manufacturing Institute, who is here with us today can confirm that fact. As Dr. Hill will detail in his testimony, Ohio owes its strength in manufacturing to a virtuous cycle of entrepreneurship and innovation, with new generations of manufacturers adapting new production methods to boost productivity, with growth driven by small manufacturers connected through supply chains and technical expertise, which are so essential. That kind of system only is possible in a system that encourages investment and innovation and the results are clear in this respect. Ohio has the fifth largest manufacturing output in the Nation at $137, or $137.9 billion, even though we're the seventh largest in population and the third highest amount of manufacturing jobs overall, at 687,345, with 96 percent of this growth driven by small manufacturers, and the Ohio manufacturing worker is paid on average $76,493, which is far above the average wage of most workers in our State. As with the broader economy, the success of the manufacturing economy in Ohio shows how free enterprise promotes innovation and boosts wages and the standard of living for the families in our State, who make up the middle class of America. With the Working Families Tax Cut Act, that Congress passed, enacted pro-growth policies that will make it easier for the American manufacturer to expand full and immediate expensing of investments in machinery and equipment through the bonus depreciation and expanded limits for section 179 expensing, full and immediate expensing for research and development, expanded deductions for interest and full expensing of new factories as well. Factories will, as Mr. Zoeller will note in his testimony, be rocket fuel for the economy and boost take-home pay for hard working Americans. And I firmly agree with that. I am grateful for that. We are joined by all of you on the panel today, and I want to again thank Chair Ernst for giving me the chance to chair this hearing. And with that, I'll recognize the Ranking Member, Senator Markey. STATEMENT OF SENATOR MARKEY Senator Markey. Okay. Thank you so much, Mr. Chairman. Thank you for this hearing. Well, Massachusetts is very proud because the Industrial Revolution was born in Lowell and Lawrence, Massachusetts, in Dover, New Hampshire, all along the Merrimack River, they figured out how to capture renewable energy. They put a dam across the river. And somehow or other, the word went to some village in Ireland and Thomas Markey said, maybe there's a job there. I think I'll take off. See you, mom, and dad. I'm heading for the Industrial Revolution, being born in Lawrence and Lowell and Dover, New Hampshire. And that's why I'm here, right now. It's just a product of that job creation, that opportunity. Now, they did swipe the technology actually from England, but that's another story. They did sign a non- disclosure agreement, but they did violate it. But nonetheless, we're here. And Lowell is still known today as the Mill City and the Spindle City. And many Massachusetts cities and towns carry nicknames from their 19th century industrial era. Winchendon is the toy town, Holyoke is the paper city, Athol is Tool Town, Taunton is Silver City, Waltham is the watch city, Gardner is the chair city. So, each of these cities then became amongst the wealthiest communities in the history of the United States, as they became the center for this incredible economic growth. And we proudly wear our industrial roots. My relatives, came here, and in fact, in 1912, my grandfather was in Lawrence in the mills when 20,000 textile workers walked out of the mills. It was called the Bread and Roses strike. So, my grandfather was there trying to figure out what's going on in terms of the rights of workers who are being exploited, by the way, we have to make sure that AI doesn't turn workers into robots in factories, too. We've got to put protections in place for that. And there were brutal working conditions, but it took the dedicated actions, like those workers at the time and better part of a century to secure what we now consider basic fundamental rights for the people who build things in this country. Workplace safety protections, child labor standards, eight- hour work day, two day weekend. My grandfather got off one day a week and one week off a year. And those are hard jobs. I know it because I never met one of my grandparents. They had all died, before I got to meet them. They had hard lives working in these factories. So, the lesson for every generation is you don't beg for your rights. You got to fight and organize if you're going to take them. And Trump is taking a one two punch approach to tearing down America's manufacturing. He's rolling back worker protections, driving up costs for manufacturers. And even after the Supreme Court ruled President Trump's tariff taxes illegal, this administration doubled down implementing new tariff taxes that make it more expensive to build things in the United States, and creating a refund system that benefits the big corporations, not the small businesses, not the workers, not the families, and not the consumers. And despite the President's outlandish promises, we have lost 80,000 manufacturing jobs since January 20th of 2025. Job openings with manufacturers are down 10 percent. Trump's tariff taxes are making it harder and harder for small manufacturers to compete. And for too many small U.S. manufacturers, MAGA stands for manufacturers are going abroad, MAGA. The President's chaotic tariff policies, and his illegal war of choice with Iran have made life more expensive for manufacturers and consumers. President Trump has sabotaged our economy with rising gas prices, skyrocketing electricity rates, soaring costs for raw materials with nothing to show for it. His harmful trumponomics have turned Main Street into Pain Street across our country. And what is the President doing to help curb these costs for small businesses? He's gutting the Small Business Administration. The president's budget proposes an unbelievable 67 percent cut for the entire Small Business Administration, slashing resources that help small businesses navigate financially difficult times. He's destroying the Federal science programs and eliminating Federal investment in scientific research, forcing innovative small businesses to lay off workers and scramble to find new work. He's eliminating the National Institutes of Standards and Technologies Manufacturing Extension Program, which as two of our witnesses today point out in their testimony, is vital to so many small manufacturers across the country. And we'll try to work on a bipartisan basis to make sure that program stays intact for our witnesses. Trump's policies have not brought a new golden age. Instead, he's brought about an industrial era gilded age of robber barons, bloated ballrooms, inequality, political corruption. So, I'm glad we have an opportunity today to celebrate this American Revolution. I'm here because of it. Lowell and Lawrence and Dover, New Hampshire. And all of you, thank you for being here. Thank you for what you do every single day. Senator Husted. Thank you, Ranking Member Markey. And yes, we are indeed celebrating America 250 the industrialization and the rise of small manufacturers today. And I want to thank all of you for being here and being present to share your stories and traveling to our Nation's capital and on this historic year to share your insights. So, I'm going to introduce the three witnesses, and then we'll give you a chance to each offer your testimony. First, I'm going to introduce Mr. Edward or Ned Hill, as I know him, and he is a faculty emeritus at the Ohio State University, where he taught economic development policy, public policy, and public finance. Mr. Hill also serves as a Senior Research Associate at the Ohio Manufacturing Institute, where he has published academic research on Ohio economic history and manufacturing policy. Mr. Hill holds a doctoral degree in economics, urban and regional planning and a master's degree in city planning from Massachusetts Institute of Technology. I know Senator Justice, couldn't be here, and he was going to introduce our next witness. I will do that. We have, second, Ms. Danielle Petrak, from Morgantown, West Virginia, and she is the curator of the Watts Museum at West Virginia University. The museum is committed to sharing and interpreting the history of West Virginia's mineral resource industries. Ms. Petrak earned her PhD in history from West Virginia University, with her research focusing on the interpretation and exhibition of coal mining history in Central Appalachia. And one of the things you have in common is you both work for universities in which Gordon Gee was the president of, Ohio State and West Virginia. And now, I'll introduce Senator Paul to introduce our final witness. STATEMENT OF SENATOR PAUL Senator Paul. Thank you. I'm honored to introduce our witness from Kentucky, Mr. Bill Zoeller. Mr. Zoeller is the Chief Executive Officer and fourth-generation owner of Zoeller Pump Company, which is headquartered in Louisville, Kentucky. The Zoeller Pump Company was founded in 1939 by August Zoeller in Louisville and for over 85 years has grown into one of North America's leading manufacturers of submersible pumps with products distributed across the world. For the past 15 years, Mr. Zoeller leadership has significantly contributed to the company's success, including navigating the coronavirus pandemic. Today, their products are known to be the industry standard and are renowned for their reliability and durability. Prior to his time at the Zoeller Pump Company, Mr. Zoeller spent over a decade in public accounting and energy sector. He started his career at KPMG as a senior auditor while earning his credentials as a CPA. Mr. Zoeller also earned his bachelor's degree in accounting from Bellarmine University and an MBA from Indiana University Southeast. Mr. Zoeller, thank you for coming before the committee today. I look forward to hearing your testimony. Senator Husted. Thank you, Senator Paul. To our witnesses, your written testimony has made been made part of the record, and the committee asks that you limit your oral remarks to 5 minutes. And with that, Mr. Hill, you are recognized for 5 minutes. STATEMENT OF MR. EDWARD ``NED'' HILL, PH.D., SENIOR RESEARCH ASSOCIATE, THE OHIO MANUFACTURING INSTITUTE, THE OHIO STATE UNIVERSITY, COLUMBUS, OHIO Mr. Hill. Thank you very much, Senator Husted. Chair Ernst, Ranking Member Markey, members of the committee, thank you for the privilege of allowing me to appear before you in the Americas 250th year. Today's hearing is fitting. The Republic was barely a year old in 1790, when President Washington and his first annual address to Congress, called for establishing an industrial policy as a foundation of national defense. The same year, Samuel Slater brought the Industrial Revolution to Pawtucket, Rhode Island. Today, I draw my research for an upcoming book on Ohio's manufacturing economic history, and my experience working with manufacturers through the Ohio Manufacturers Association. I note for the record that Wyatt Newman, co-founder of RoadPrintz, a company I will discuss shortly, is a close friend. Additionally, my testimony does not reflect the views of the Ohio Manufacturers Association, the Ohio State University, or the Ohio Manufacturing Institute. I begin by introducing you to Ohio's economy. Ohio is not a manufacturing farm or services State. Instead, Ohio is a portfolio State that competes globally with goods and services produced across eight regional labour markets in numerous rural communities. Within that portfolio, manufacturing leads in exports to the rest of the Nation in the world. Manufacturing accounts for 16.5 percent of the State's GDP, more than any other private industry. As of 2024, Ohio ranked fifth in manufacturing GDP and a near dead heat with Illinois and Indiana. Ohio manufacturing workers earned an average annual wage of approximately $76,500 in 2023, supporting families in their communities. More recent data shows that Ohio has 677,500 manufacturing jobs in 2025. While Honda, GE aerospace, whirlpool, Lincoln Electric, Goodyear, among many others, are the economy's anchors, anchors need chains to hold their boats fast. Ohio supply chains are disproportionately composed of smaller manufacturers. The fabricated metal shops, precision machining firms, plastics and rubber plastics, specialty suppliers that fill Ohio supply chains make those businesses viable. When a large Ohio plant thrives, dozens of smaller suppliers thrive with it. When one closes, the supply chain feels it first. One statistic is particularly relevant to the committee's purpose. 88 percent of Ohio's 13,000 manufacturing establishments employ fewer than 100 workers. These establishments populate main streets and business parks and sustain rural communities. Ohio's industrial story, however, begins with President Washington's first address to Congress in January 1790, which contains a sentence that most Americans don't know. American President Washington refers to, a free people, riding their safety and interest require they should promote such manufactories as tend to render them independent of others for essential, particularly military supplies. President Washington's first policy proposal to Congress was to build American industry. It was the Nation's first industrial policy. Coincidentally, as I mentioned earlier, 1790 was also the year that Samuel Slater built his mill in Pawtucket, launching the Industrial Revolution in the United States. The President's proposal led to the establishment of Federal armories in Springfield, Massachusetts, in 1794 and in Harpers Ferry, Virginia, in 1798. Washington's logic was vindicated in 1814, when British forces burned the Capitol in the White House. The torching of our capital city also ignited a 40-year commitment to manufacturing rifles with interchangeable parts, shifting defense policy into industrial policy. By 1851, British observers named it the American System of manufacturers, and one historian interpret that as meaning the American system of interchangeable parts. That system crossed the Appalachian Mountains in the heads and hands of mechanics, becoming visible in Whiteley's Reapers in Ohio's Springfield and Thomas White sewing machines in Cleveland. Ohio's early machine tool makers gave the State's factories the capacity to cut, shape and stamp steel at scale. When Henry Ford introduced the moving assembly line in 1913, Ohio's manufacturers were positioned to supply it. Today, Ohio's entrepreneurs are building companies to join the next manufacturing wave. I'll give you two examples. There are others in my written testimony that I've submitted. One founded in 2017, the other a turnaround that was founded 99 years earlier. RoadPrintz, headquartered in Cleveland, built an operator driven truck mounted robotic road making system. It was founded in 2017 by Wyatt Newman, a Case Western Reserve University robotics professor, and Sam Bell, a master mechanic who closed his auto repair shop, the infamously named the Lusty Wrench, to join the business. RoadPrintz started with a motor man robot from Dayton, a fabrication support from Q.T Equipment, a family-owned truck upfitter in Akron, and its paint comes from Aexcel in Mentor. Today, RoadPrintz has five full-time employees, five patents, paying customers from Missouri's Department of Transportation to the City of Houston, and its founding and early growth were supported by NSF's Small Business Innovation Research Grants. The founders thought they were selling road striping efficiency and precision. They were wrong. A blue-collar Cleveland Public Works employee told them his wife liked it when he was inside the cab painting, instead of walking next to traffic, because she knew he'd be coming home that night. RoadPrintz built a worker safety device. The founders learned the value of their invention from someone who used it. Mike Garvey, CEO of Youngstown's M-7 technologies, describes his factory as a place where the Flintstones meet the Jetsons. Garvey's grandfather started a bronze factory in 1918, serving Youngstown steel mills. But after the mills collapsed, and the fire destroyed the facility, Garvey rebuilt around measurement, science, and digital manufacturing. Today, he operates one of the world's largest 3D printers and produces parts with micron level tolerances for aerospace and defense. M-7 grew from three employees in 1985 to 50. These companies represent what the next wave of manufacturing looks like; digitally connected production systems that solve problems, that matter to American industry and American workers. RoadPrintz's product is a digital production system, while M-7 uses one. Both are Ohio born, a century apart. These companies exist in part because of federal investments in the NSF, patient capital from public grants, and technical assistance from the Manufacturing Extension Partnership that made them all possible. As President Washington's armories demonstrated, technology without appropriate management is expensive and ineffective. The Springfield Armory seated America's first industrial cluster, and it housed America's first version of the manufacturing extension partnership. Springfield, Ohio, reaped the reward. The Federal Government shaped Ohio's industrial revolution, and entrepreneurs and engineers created the products that built a competitive economy. Now, their descendants are forging their futures. Thank you. [The prepared statement of Mr. Hill follows.] [GRAPHICS NOT AVAILABLE IN TIFF FORMAT] Senator Husted. Thank you, Mr. Hill. Ms. Petrak. You are recognized for 5 minutes. Just hit your button there. STATEMENT OF MS. DANIELLE M. PETRAK, CURATOR, WATTS MUSEUM, WEST VIRGINIA UNIVERSITY, MORGANTOWN, WEST VIRGINIA Ms. Petrak. Thank you, Chair Ernst, Ranking member Markey, Senator Husted, and distinguished members of the committee. I am Danielle Petrak, curator of the Watts Museum and Industrial History Museum in the Statler College of Engineering and Mineral Resources at West Virginia University. Our museum is named after Royce Watts, who retired from WVU in 2017, after more than 60 years at the university. Like many West Virginians, Royce was born into a mining family. He did not pursue a career in mining, but as a child, Royce made money chopping logs and selling them to miners for a few cents each, to use as roof supports in the mines. Sadly, in 1942, when Royce was 13, his father, a coal miner, was killed in a mine roof fall in southern West Virginia. At this time, the early 1940s, the West Virginia mining industry was booming, as coal production revved up to meet the Nation's needs during World War II. The industrialization of West Virginia is nearly always associated with coal, in particular, the start of large-scale commercial coal mining in the late 19th century. But as we commemorate America 250, it is important to note that West Virginia had a strong, diverse industrial economy well before the birth of its commercial coal industry. In popular culture, the media and other narratives, West Virginia, both past and present, is often portrayed as a remote place, a place of isolation. The vitality of its antebellum industries however, shows that the State, although rugged and rural, was in fact well connected to much of the United States via trade networks and regional economies, long before King Coal boomed onto the scene. Nicknamed the Mountain State, West Virginia is known for the abundant natural resources in its hills and valleys, coal, as well as natural gas, salt, silica, sand, clay, limestone, oil, timber and more. Before the arrival of railroads, West Virginia was also home to important transportation networks. The National Road, for example, completed a main travel route to the west in 1818 by linking the Potomac River in Cumberland, Maryland to the Ohio River in Wheeling. In 1840, as covered wagons journeyed along the National Road, a 22-year-old Mifflin M. Marsh carried baskets full of hand-rolled tobacco filled Conestoga's, or stogies, that he sold to wagon drivers as they approached the banks of the Ohio River. Later, owning a company that made up to three million cigars per week, Marsh launched a cigar industry in Wheeling that grew to nearly 100 manufacturers in the city by the late 19th century. Wheeling's location and access to fuel sources also helped to sustain multiple nails making factories in the mid-1800s, an industrial legacy that inspired the name of the city's minor league hockey team, the Nailers. Thanks to extensive high quality clay deposits in West Virginia, commercial pottery manufacturers popped up throughout the State in the late 1700s. Thompsons pottery in Morgantown, spearheaded the area's transition from earthenware to more durable, non-porous stoneware in the 1850s. Their techniques and designs trickled over the State line, influencing the work of Pennsylvania potters. In 1901, Smithsonian curator Walter Hough, a West Virginia native, recognized the significance of Thompson's work, and collected most of the surviving examples of their pottery and tools, which are now in the National Museum of American History. Abundant deposits of other natural resources, namely silica, sand and natural gas, fueled the State's glass industry, with its first glass manufacturer opening in 1813, followed by roughly 400 more over the next 150 years. Based in Moundsville, Fostoria Glass made the longest produced glass pattern in U.S. history, the ``American'' line, for 71 years. Marsh Wheeling Cigars, LaBelle Cut Nails, Fostoria Glass; these businesses were not small per se, but they also were not comparable in scale to the energy corporations often associated with industry in West Virginia. Importantly, these companies were founded by West Virginia natives and residents. They employed skilled union workers, and they created products using their State's natural resources, to inject wealth and add value into the local economy. As we think about ``Reindustrializing'' America and Appalachia from a small business perspective, we should look back to West Virginia's early industrial history, taking inspiration from this past era and investing in today's smaller scale, diverse and local industries, and businesses. Senator Justice, as Governor, you made manufacturing a cornerstone of West Virginia's economic growth, and your work in the Senate continues that focus, through your advocacy for domestic manufacturing, workforce pipeline development, and Federal investments that help West Virginia employers hire, train, and grow. Both WVU and Marshall University play an important role in this effort, supporting small and medium sized manufacturers through the West Virginia Manufacturing Extension Partnership at WVU, and Marshall's Advanced Manufacturing Center, strengthening competitiveness across the State. Thank you. I greatly appreciate this opportunity to share with you some history of West Virginia, a place whose people and natural resources I care about very deeply. [The prepared statement of Ms. Petrak follows.] [GRAPHICS NOT AVAILABLE IN TIFF FORMAT] Senator Husted. Thank you very much, Ms. Petrak. And now, I would like to recognize Mr. Zoeller for 5 minutes. And thank you for being here. STATEMENT OF MR. BILL ZOELLER, CPA, CEO AND GREAT-GRANDSON OF FOUNDER, ZOELLER PUMP COMPANY, LOUISVILLE, KENTUCKY Mr. Zoeller. Thank you, Chair Ernst, Ranking Member Markey, Senator Paul, for your kind opening remarks. My name is Bill Zoeller, and I'm the CEO of Zoeller Company and the proud great grandson of August Zoeller, who founded our family business in 1939 in Louisville, Kentucky. And it is an honor to testify at today's hearing celebrating America's 250th birthday. Zoeller is a family of manufactured water solutions. Our family of water solutions, brings clean water to a facility, moves that water around a facility, collects the dirty water, and removes it from the facility. We manufacture pumps, containers, and controls to provide the solution. These products support the infrastructure of our great country. We manufacture quality products that are serviced by the best manufacturing reps in the business, many of which are multi-generational family businesses as well. These products are sold through our fantastic wholesale partners and then installed by hard working plumbers. This activity happens every day, and we are honored to be part of the plumbing industry. Our story is one of humble beginnings that grew by faith and grit. We were founded in my great grandparents' basement and sold six pumps the first year. However, we have grown significantly since our founding, acquiring other companies to expand our product offerings. This includes Flint and Walling, which was founded in 1866 and is based in Kendallville, Indiana. We also operate Zoeller Custom Molding in Boonville, Indiana, Wolf Pump in Abernathy, Texas, and Sencillo Systems in Philadelphia, Pennsylvania. Flint & Walling was founded over 160 years ago and has a unique history of its own. Producing windmills that powered groundwater pumps, these pumps provided irrigation and crops for water and livestock. These products help support America's westward expansion in the late 1800s. During World War II, Flint & Walling was called upon once again and pivoted from making pumps to producing shells and aircraft components for the U.S. Navy. Regardless of location, our core values of quality, service, innovation, and integrity have served us well over the past 87 years. Our team members understand these values and demonstrate them every day. I'm so proud of the work that they do and the quality products that they manufacture. The Zoeller brand is well known in the industry, and in fact, our core product, the 530001, was awarded two trademarks; one on its unique shape and one on its color. These trademarks prevented offshore knockoffs from tarnishing our brand. As Zoeller, we are proud to have ``Made in the USA'' label on our Zoeller Pump Main Line products. In 2012, our motor supplier moved production to Mexico and we lost our ``Made in the USA'' mark. So, we invested in our people, decided to manufacture those motors internally. This created 35 jobs in Indiana and we could put ``Made in the USA'' back on several products. But the Zoeller story is just one part of Manufacturing's legacy in America. America's story is a manufacturing story, from 1776 to today. Congress and the Trump administration are doing their part to drop policies, which in turn reduce the cost of doing business in the United States. For example, this Congress preserved the 21 percent corporate tax rate, and provided immediate expensing of R&D activities. These actions prevented tax increases and paved the way for our continued expansion. Beyond the tax bill, Zoeller has also benefited from the Trump's administration reforms to reduce the cost of Federal regulations and ensure that rules are practical and workable. As a leader, I fully believe that you will never get anything 100 percent right, but you get close, and you keep fine tuning. So here comes some opportunity for fine tuning to ensure that the next 250 years are even stronger for manufacturing in America. First, Congress and the administration should keep up the work to right size the burden of Federal regulations. Manufacturers spend $350 billion every year on regulatory compliance. Second, Congress should double down on the infrastructure bill, which is set to expire later this year. Manufacturers need robust highways, bridges, ports, waterways to make and move products across the country. Third, manufacturers need permitting reform that cuts red tape and clears out roadblocks. Fourth, we need strategic trade policies to ensure manufacturers have easy and reliable access to the inputs and machinery we need to make things in America. And finally, we need policies that support our industry efforts to upskill and train the manufacturing workforce. Currently, we have more than 400,000 jobs open across the sector. The 2025 Tax Bill is the foundation, and if backed by the right policies, manufacturers like Zoeller will be ready and proud to drive the next 250 years of American manufacturing. Thank you for your time. [The prepared statement of Mr. Zoeller follows.] [GRAPHICS NOT AVAILABLE IN TIFF FORMAT] Senator Husted. Thank you very much, Mr. Zoeller, and thank you all for being here today to celebrate America 250, and the industrialization and the rise of manufacturers in our country. And I know we want to want to keep it that way for the future. But let me start with some member questions, and let me turn to our chair of the committee, Senator Ernst. I'll give you the chance to lead us off. Chair. I appreciate that, and thank you, Senator Husted for chairing today's activities. This is great to be able to celebrate our Nation's 250th in regards to our small businesses, which really are the backbone of the United States. So, Mr. Hill, your testimony discussed the new businesses that are leading the re-industrialization of Ohio and America. Alongside Senator Coons, I am leading the Made in America Manufacturing Finance Act, and this will raise the SBA loan limit for manufacturers from $5 million up to $10 million. And how will greater capital access for small manufacturers support investment in America's industrial capacity? Mr. Hill. Senators, thank you very much for the question, and I appreciate the attention that the staff has given to bring this testimony along. The reality of manufacturing over the past 5 years and going forward is that capital intensity is increasing. So, we've looked at the ratios of the number of jobs per dollar invested in manufacturing, and it's been going up. So, one of the real challenges that manufacturers and small manufacturers has is the capital constraints. So, raising the lending limits, especially the way in which you do it so that the banks make certain it's a good credit, is fiscally responsible and I think economically necessary. The largest challenge that I've seen with small manufacturers is actually--along with the cost of the equipment, is the ability to integrate it in their production processes. And that's where another barrier exists because most of the system integrators now because of industry 4.0, AI, and cyber have hurdle rates, minimum contract amounts that many of our small manufacturers cannot afford to pay. And that's one of the reasons why with our historical research, we've seen that operations technologies, the stuff that used to make stuff, has a long lag if the management systems can't keep up. So, one of the large challenges that our small firms have, is to not only be able to afford the capital, but afford the advising around how to deploy that capital so that their costs go down rather than up. So, I applaud you for your thoughtfulness, your strategy and I think that making it possible for small firms to invest in their future is essential for the economy. Chair. Well, thank you. Mr. Hill. Not that I have an opinion at all. Chair. I think many do share thoughts on that as well. And we really appreciate the input. So, thank you for being here. Mr. Zoeller, the Working Families Tax Cuts Act that was passed by Congress last year is encouraging a lot of our small businesses to invest in their operations and allowing American workers to keep more of their hard-earned dollars in their own pockets. That's really important. So how have you, in particular, been able to take advantage of this act that was passed last year? And what impact have you seen for your employees? Mr. Zoeller. Thank you for the question. First and foremost, the no tax on overtime is great for our employees. We run a union shop, we have mandatory overtime, we have spikes in demand. And for them to be able to take more take-home pay is great. We love to take care of our employees. And that's been a big help. We're currently expanding. We're trying to bring on additional equipment to increase our U.S. manufacturing or production. So, obviously, the bonus depreciation is beneficial today and into the future, and you know those things are critical to make sure we have the capital to keep deploying those things. We're a conservative family business. We don't take out debt. So, we need to kind of manage our cash flow appropriately. And by having a little more tax savings in the pocket to invest, that's a good thing for us. Chair. Thank you so much. And to our small business owners, thank you so much. And Ms. Petrak, thank you for telling the history behind so many of West Virginia's small businesses. We are so glad to celebrate our 250th year here in the United States of America. And you're all part of this incredible journey. So, thank you very much for participating today. Thank you very much, Senator Husted. Senator Husted. Thank you, Chair Ernst. I'll start with a question for you, Mr. Hill. I know that I love economics because it's like a puzzle, you're trying to figure it out all the time. Like what is the best way, what are the right incentives? And I was interested in your George Washington reference because, there wasn't a central planner for the American economy over those 250 years. But there were some goals. There were some things that we wanted people to achieve, but we had created an environment where there was essentially a freedom to achieve that. And the structure of the rule of law, protect people, encourage investment, those things are protected in our Nation, but you also have the freedom to expand. And that has been sort of the underpinning of the driving of our success. But we've also, being an Ohioan too, have seen ups and downs. We've seen creative destruction. We've seen government get it wrong. We've seen the manufacturing economy. It's ironic that we're here at a moment when President Trump is in China, because we saw a lot of our manufacturing head to China over the years, but now we're trying to get it back. We're trying to do ``Made in America.'' We're trying to reindustrialize, and we've had some success with that. So, as we look forward, what policies--we think about this, we really want manufacturing economy to take root in America and make the things that are essential for our economic and national security. What policies should we put in place going forward, as you see it, to ensure that that happens? Mr. Hill. Senator Husted, thank you for the very easy question. Going back to President Washington and the three armories, it's a wonderful example. You're right. There is, no central planning works. But the American Industrial Revolution started with those three armories. Senator Markey and I can have a wonderful conversation about what side of Massachusetts had the largest impact. But Springfield, Massachusetts, helped create Springfield, Ohio. So, what was it that took place? There was sustained investment in basic defense technology, to make interchangeable parts for rifles, and that took 40 years. It was a bureaucrat in the Department of Ordnance that continued issuing those contracts despite the technological hurdles, the machines, and the accounting systems, which by the way, came out of West Point. That made America's factories in the 1850s and beyond the most productive in the world, were a product of investing Federal money into creating public goods that were transferable into industries, and created the management systems along with operations technologies. So, the secret sauce in this is to invest in public goods, so that businesses could take them to make services that respond to customers. So, my fear is that if we hollow out the ability to create that shared public knowledge, as it has happened in Springfield, Massachusetts, that stretched down the Connecticut Valley into Hartford and north up into Vermont, went over to the Naugatuck Valley in Connecticut, where it powered the watch industry, the bicycle industry. Well, that was the same production system that was invented in Springfield, crossed the Appalachians, and created Ohio's economy. Senator Husted. So, let's fast forward into history, and we know how that planning worked with the arsenal of democracy, where American industry responded during World War II. Mr. Hill. Correct. Senator Husted. But then we also had this experience starting, I would call it, in the 1960s and the 1970s, certainly in the 1980s into the 1990s, where in places like Ohio, we saw the manufacturing economy collapse. And so, what are the factors that when you learn from that history that can teach us about how we preserve that going forward? Mr. Hill. Well, Senator Husted, I'm delighted to have, Dr. Fran Stewart with me. She's one of the co-authors on the book, and we're wrestling with that as we look at Ohio's economic history. And, in that book, what we found out, is that we were subject to something called the product cycle. The product cycle is when a new product is born, a new technology enlivens a product. You go through a period of very rapid growth. Then once when the markets get saturated, the number of competitors shrink, growth rates tail off, and then once one demand disappears or slackens or gets closer, then the growth rates drop. What happened to Ohio from 1968 through the 1970s, is that all of our core industries had the exact same product cycle age, and they all went into decline together. What do we learn about this? Well, what we learned is public policy; that when you were speaker of the House, you were endorsing and you still endorse. And that is we had to take a State that grew complacent out of the power and the incomes and stabilities of the jobs that came out of 1913 on, and what happened was entrepreneurship in our State died. We spent from the 1990s and 2000 in the traditional manufacturing towns of Ohio to recreate the spirit of large- scale entrepreneurship. So, one of the things that we have to do is always be humble. When your products are at the top of the world, understand that they're going to age. Make certain that you always have those entrepreneurs trying to figure out the new ways of doing things. So that's the reason why in my testimony, I highlight four firms. I said one of them would turn around, three of them startups, that are really leading the way for inventing new products, out of public intellectual property that is creating new products. Senator Husted. Okay. Well, I'm going to come back to you later. I'm going to let my colleagues ask their questions now, but we'll put a pin in entrepreneurship and we'll come back and talk to you in a second. Senator Paul. Senator Paul. Mr. Zoeller, thank you for coming. It's great to have someone from Louisville up here. We need more people from Kentucky up here so I can feel at home when I'm away from home. I enjoyed reading through your testimony, and it sounded like virtually every facet of the Tax bill had some advantage for your business, which is great because that's what it's supposed to do, help American businesses keep more of their income and thrive. You know, from the Death Tax to the Corporate Tax to the expensing to the pass through, everything seemed to be something that was just set up perfectly for you guys. I was intrigued by your testimony, though. When we get to the idea of trying to bring things home because everybody's like, well, let's build an America and you're proud, you make things in America, and so am I. That's great. But people have to realize to make things in America, we are not an island. And that often we need stuff that comes from other countries. And what you're saying about sometimes needing equipment from Germany and Japan is what I hear from so many other people. Like, yes, we want to make things in America. But if you tariff the things that were, you know, the machinery that we need, we're going to have a problem. So there really does need to be somebody looking at these tariffs and saying, hey, should we really be tariffing equipment that helps us build things here? Can you tell us a little bit about the equipment you're needing and how it will help you bring manufacturing here, but that you actually have to buy the equipment somewhere else? Mr. Zoeller. Yes. I appreciate the question, Senator. As I kind of also talked to my testimony, we are ``Made in the USA.'' So, we definitely appreciate the tariffs from a standpoint of keeping the knockoffs out, specifically to the equipment that we need. Yes, most of that equipment is specialized outside of the U.S. Our current situation to try to increase capacity, we have three tarmac machines on order from Germany, ones landed that first one. We did have to pay a tariff on that. We have two more that are coming this summer, from Germany as well. Hopefully, those will be online in October, so we can increase our capacity. But both of those are currently scheduled to be hit with the tariffs as well. So, in order to increase capacity in the U.S., I believe that we're going to need equipment to do that, and some of that equipment is just not made here. It's just the fact. Senator Paul. Is any of the knockoff equipment that you're concerned with illegal because of their infringing either on trademark or patent? Mr. Zoeller. Yes, these are specific to our finished goods. And as I've talked about, we have professional plumbers at one point that would put the knockoff Zoeller pumps inside our boxes and return them to us because, professional plumbers couldn't tell the difference between what we made and what the offshores product was until we could open them up and notice that those weren't our motors and components. Senator Paul. So, who's the law enforcement, there? Who do you complain to and who enforces this? Is it a either trademark or patent. Mr. Zoeller. We'll start with the Trade Compliance, you know, can help us with some of that type of stuff. Senator Paul. Is that part of the FTC? Mr. Zoeller. FTC is who we dealt with in the early 2020s, late 2019. Senator Paul. And have they been helpful? Mr. Zoeller. They're very helpful, on those two pieces. Yes. Senator Paul. Because, that's something that I would just offer that if you have problems, we're more than happy to engage and try to say, hey, let's enforce the law on this stuff, because that is absolutely against the law to steal someone's intellectual property and then try to sell it as your own. But, thank you for coming, thank you for what you're doing. And let us know if we can help in any way. Mr. Zoeller. Thank you, Senator. Senator Husted. If I can ask a follow up on Senator Paul's question. What country do you see the most of the knockoffs coming from? Mr. Zoeller. They were coming from China. Senator Husted. China. Okay. Thank you, Senator Justice. Senator Justice. Okay. Thank you so much. And, first of all, Danielle, I'm sorry I wasn't here to introduce you. It had been a big-time pleasure for me to introduce. But I've known you forever, and I know the good stuff you do. And I thank you guys for being great witnesses and being here for one purpose. And that is you want things to be better. You want things to be remembered, and all that is so absolutely genuine to me. If I could just say a couple things about Danielle Petrak, you know, she naturally is a curator of the Watts Museum at West Virginia University, and West Virginia University does all kinds of wonderful, wonderful stuff. But the thing that's really unique about her is how much she cares. She cares about West Virginia's industries and all that and the acknowledgement that we'll remember. But she absolutely, deeply cares about what the fabric of West Virginia is all about. And that's about families. It's about craftsmen. It's about faith-based people. It's about the real thing that this country has been made of. And West Virginia stepped up and stepped up forevermore and did so much stuff, it's unbelievable and we should be very, very, very proud. I know Danielle is and I know right now, when we're honestly right on the cusp of celebrating our 250 years in this country, it is amazing what West Virginia did and what West Virginia contributed. But now I want to switch channels with you, and I want you to just stay with me, just one second. Today, China is an unbelievable competitor or an unbelievable country that is doing so much stuff that in a lot of situations we don't like, and we would like it to be so much better. We want to build more stuff in America, I get that, but it's harder than just saying we want to build more stuff. It's just like our chairman up here just said a few minutes ago, it's harder than just saying that's what we want to do, and then it just happens. Let me tell you just this, though. Here's how silly we are in so many different ways. In the State of West Virginia and many States, whether it be Pennsylvania or Vermont or wherever it may be, Kentucky, whatever. You know, we abound in hardwoods that are second to none. It's phenomenal beyond belief. You know, West Virginia always when we think about natural resources, we think about coal and oil and gas, but we have water and we have unbelievable timber. Now, just think about what we do when we cut a log. Here's what we do. We dry keel it, and then we put it in a truck instead of making something right there in America, we put it in a truck and we drive it to Newport News and missions going everywhere. Then we put it on a boat, same thing. And it goes to Vietnam or China or Mexico goes somewhere, and then something is made out of it there. And then we put it back on the boat, back on the truck, and bring it back to the U.S. to put it to market. It is the silliest thing in the history of the world. In some way, somehow, we have migrated completely out of our flooring and cabinetry and all the different things that is so available to us in these great States. And it's just gone away. And Ohio is another great State for just that. Now, why can't we do something about it? At the end of the day, that's where I really salute all of y'all, and all this great committee, because the fabric of all of us is the small businesses that have made it work. That's a fact. And Danielle, I could never say enough about you because really and truly, you bring to life just our history and all the goodness that we've done. Now listen, everybody, I just speak plain words when I just tell you just this; We got challenges. Sure. We just can't flip our fingers and then all of a sudden, boom, boom, boom, we're going to have all kinds of stuff more Made in the U.S., but we can do it. We can solve the riddle. If we'll just work at it a little bit, we can solve the riddle. There could be all kinds of different ways to solve just the riddle that I just said to you, and we got to do it. And now's our chance, right this minute. We got to do it now. We got to not just talk about it. This place is unbelievable. This place drives me completely crazy about the frustration of just talking about stuff. It's almost like we don't want to really get something done. We just want to keep it going. If we can keep it going, we can have 18 more fundraisers, we can do whatever it may be, and it just keeps going round and round and round and round and round, and we forget something that is so important, that Danielle will never forget. And I'm sure y'all won't. And I'm sure this great man right up here, Jon, is a good, good man. But I can tell you the thing we forget at the end of every single thing we do, there's a name and there's a family. That's what we're supposed to be doing. I didn't come here with white hair to just sit around. I didn't come here with white hair to keep it going. Let's solve the riddle, everybody. Okay? Thank you all so much, Danielle. Sorry I wasn't here; I'm going 15 different directions all at the same time. Sorry. Senator Husted. Thank you, Senator Justice. So, I know Senator Hawley will be back, and he wants to ask a question, so I'm going to take the chance here to come back to you, Mr. Hill, because we put a pin in entrepreneurism, is that we had stagnation that occurred, product maturity. And then we were competing on price. And then we couldn't do that anymore because lower wage nations, things that Senator Justice was talking about couldn't compete. And so, our mature industries sort of died. And then that means we have innovation and entrepreneurship and creative destruction and the next cycle of businesses to come around which we want to create that environment, which in my world, you know, the more capital will flow where it's most appreciated and it will succeed. And so now, I think the dilemma that that Senator Justice was kind of talking about and what we're all saying is that, we want to do Made in America for our economic and national security, because we've realized that, hey, we have 700 drugs right now that we couldn't make in this country because the pharmaceutical supply chain is in China, or rare earth materials that we couldn't make a bomb or a battery if we didn't have access to, if we were cut off from these things. The chip supply chain, all of these things we're learning that our economy, our national security is vulnerable because the manufacturing supply chain for the things that are essential have left our country, that we need to nearshore, friendshore, onshore them if we want to have that security back. However, we're also fighting this other issue of affordability, where we like the less expensive product. Why, Mr. Zoeller, do they buy a pump from China rather than yours? Because they probably make it cheaper. Right. Mr. Zoeller. Correct. Senator Husted. And so how, as we approach these dual goals of making more things in America and wanting to keep prices under control, what are the solutions? And I'm going to give you all a chance to address this, but I will offer something and you can build on this, Mr. Hill. It's productivity gains. It's the innovation. It's the technology that we can do things just better and more effective in a higher quality than they can in these other countries. If we have those productivity and innovation gains. And I'm interested in what you think about that as being the thread that can weave these two goals of onshoring and affordability together. And please share your thoughts. Mr. Hill. Well, thank you for another easy question. Senator Husted, you're on a roll. Productivity is the sword that cuts the Gordian knot. But we have to understand where productivity comes from. So, when most people think about productivity, we'll invoke the words of Senator Voinovich, who would always if you so much as look at him cross-eyed, he'd just say, ``Better, faster, cheaper, smarter.'' Well, as we look at how productivity is defined, it's less what happens on the shop floor and much what happens with the company itself. Productivity is value added for just a rough measure, for every hour worked. Where are the largest parts of value added? It comes from the top line of the income statement. Meanwhile, when we talk about productivity, we start figuring out how to squeeze those middle lines. So, the way to get a company more productive more quickly is to invent new products or services that generates higher operating revenue. So that's part step one. Step two, is looking at those middle lines and that's where the faster, smarter, cheaper Voinovich solution exists. And now we have an opportunity with the spread of digitally integrated operations technologies on shop floors, being tied into the rest of management, to realize that that's where the second step of productivity improvement is going to come from. For the smaller employers, those employing from 100 to 10 or lower, they cannot afford the management help to get them to do it, because the hurdle rates are too high. That's the reason why the Manufacturing Extension Partnership is so important to me as being part of the solution. Because what we have to do is just what George Washington's armories did, was to make those management solutions public goods, not that you pay for the consultants, but you make certain that people know how to manage these new technologies. We have data from 2016 showing that industry 4.0, two thirds of all companies that invested in industry 4.0 in 2016 lost money. Why? Because the management systems weren't there. They didn't know how to work it. It was an engineering toy that we were trying to figure out. So, what we do consistently wrong is we believe that there is going to be a machine-based operations technology silver bullet that's going to increase productivity. That's only in one chamber. The other is how do you manage it? How do we get rid of non-compete clauses so that that knowledge can flow freely throughout the rest of the economy. How can we make certain that our smaller employers are engaged in sharing knowledge across with each other to figure out how this stuff works? The barrier to acquiring technology and using it effectively is real. Senator Husted. Okay. Thank you. Ms. Petrak, do you want to share some thoughts on that particular topic? If you don't, that's fine. I just want to give you the opportunity. Ms. Petrak. No, I would just prefer to share the history with you all, and I'm grateful that you've let me do that. Senator Husted. I appreciate that. Mr. Zoeller. Mr. Zoeller. Yes. Thank you for the question. I can't talk in the broad sense of the industry, but I can specifically talk about our company. As a family-owned business we operate and plan in decades. We don't plan in quarters. This recent investment that I talked about earlier was a big investment for us. And our management team talked, and a lot of the reasons why we did the investment was because we were going to have productivity gains. We're going to increase capacity. The productivity gains can be making, our pumps faster, but also be reducing the scrap out on the shop floor. So, all that stuff comes into play. Our sales team right now, they know this capacity is coming and they need to get out and sell it, because we got to be able to make more inside our footprint, to be able to reduce the overall cost, and that also will increase our sales. But it's a cycle. And like I said, you've got to have the productivity one, and then that capacity, you got to be able to sell it. So, whether that's domestically or internationally, so I guess coming back to some of the trade policies that we might need to take a look at as well. Senator Husted. And I'm going to follow up on your point about the pumps that are coming in from China. How much are they undercutting you on price on those? Mr. Zoeller. It's probably about 40 percent. Senator Husted. And they're violating all kinds of standing agreements that we have? Mr. Zoeller. Yes. I can't speak to the FTC laws and stuff like that. But obviously when we find out about them, the fact that we were able to get the two trademarks with the trademark office, we're able to shut them down relatively fast with the help of the government and FTC and stuff like that. But they're out there. Our customers are the ones that most of the time make us aware of something like that. Senator Husted. You mentioned in your testimony, Mr. Zoeller, that the working Family Tax Cut plan has no tax on overtime. You work your folks overtime a lot. How is it affecting them? Because I remember I visited a manufacturing facility in Findlay and was talking to a young man who had decided that he was going to work his 55 hours a week of overtime and take it the whole year. And the amount of money that he would save was going to be enough to put a down payment on a house. Are some of your employees thinking like that? Do they realize this or is it not a factor to them? Mr. Zoeller. Yeah, I would love to talk about our employees. So high level. A couple of things just to kind of give a little background. So, we work two shifts, both are ten- hour shifts. So, we don't work on Fridays historically. We got a lot of lakes in Kentucky and our employees like to go out and enjoy those lakes on the weekends and especially nice days like today. So, when we do have overtime, they work on Friday, and they're able to do that. And on top of that, we also try to do education with our employees from a standpoint of whether it's financial education, wellness education, mental health, education, all those pieces to make them a better individual so they can take that home to their families as well. I can't say that any individuals, is getting enough overtime to buy a house because we don't like to work them that hard, but they are maybe able to do something nice with the family, with those. And we do communicate that we have a relationship with a credit union bank that's right around the corner from us. They come in and do those financial literacy things and we have pretty good participation. Senator Husted. Great. I want to thank all of you for being here today and serving as witnesses and offering your perspective on American manufacturing. I do think the 250th anniversary of our Nation is a very special occasion. It's also an occasion to look back and understand what made us successful and then use those lessons to determine a path forward so that we can support small businesses in our Nation for the future and certainly those in manufacturing, because we know that manufacturing jobs just are so important, not only because they pay higher wages, but the trickle down or trickle throughput that they have in the whole supply chain and the jobs that they create in addition. So, with that, I ask unanimous consent that the record of today's hearing remain open for 2 weeks for members to submit questions, or revise and extend their remarks, and to submit additional information into the record. Without objection, so ordered. With that, the Committee on Small Business and Entrepreneurship stands adjourned. Thank you. [Whereupon, at 3:37 p.m., the hearing was adjourned.] [all]