CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 87

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 87 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) Formwork, falsework and re-shoring shall be designed, constructed, supported and braced so that they are capable of withstanding all loads and forces likely to be applied to them, (a) without exceeding the allowable working loads established for any component of the structure; and (b) without causing uplift, sliding, overturning or lateral displacement of the system. O. Reg. 213/91, s. 87 (1). (2) No formwork, falsework or re-shoring shall be loaded in excess of the load that it is designed and constructed to bear. O. Reg. 213/91, s. 87 (2). (3) The allowable working load of the formwork, falsework or re-shoring shall be established, (a) by an engineer in accordance with good engineering practice; or (b) by testing the principal components to their ultimate strength in a manner that simulates the actual loading conditions to which the formwork, falsework or re-shoring is likely to be subjected and by applying a reduction factor, in accordance with good engineering practice, to the values of ultimate strength. O. Reg. 213/91, s. 87 (3); O. Reg. 375/22, s. 5. (4) The results of the testing in clause (3) (b) shall be verified and certified by an engineer and made available to an inspector upon request. O. Reg. 213/91, s. 87 (4); O. Reg. 375/22, s. 5. (5) If single post shores are placed more than one tier high, the junction of each tier shall be braced against a fixed support in at least two directions in order to prevent any lateral movement. O. Reg. 213/91, s. 87 (5).
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.