CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 193

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 193 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) A worker who may be exposed to the hazard of electrical shock or burn while performing work shall use rubber gloves, (a) that are adequate to protect him or her against electrical shock and burn; (b) that have been tested and certified in accordance with subsection (2), if applicable; and (c) that have been air tested and visually inspected for damage and adequacy immediately before each use. O. Reg. 627/05, s. 7. (2) Rubber gloves rated for use with voltages above 5,000 volts AC shall be tested and certified to ensure that they can withstand the voltages for which they are rated, (a) at least once every three months, if they are in service; (b) at least once every six months, if they are not in service. O. Reg. 627/05, s. 7. (3) Rubber gloves shall be worn with adequate leather protectors and shall not be worn inside out. O. Reg. 627/05, s. 7. (4) Leather protectors shall be visually inspected for damage and adequacy immediately before each use. O. Reg. 627/05, s. 7. (5) Rubber gloves or leather protectors that are damaged or not adequate to protect workers from electrical shock and burn shall not be used. O. Reg. 627/05, s. 7. (6) Workers shall be trained in the proper use, care and storage of rubber gloves and leather protectors. O. Reg. 627/05, s. 7.
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.