CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 161

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 161 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) A competent worker shall perform operational tests on a tower crane to ensure that, (a) its limiting and indicating devices are installed and functioning in accordance with the manufacturer’s specifications or an engineer’s instructions; (b) all clearances and alignments are adequate; (c) gearing and all other moving parts are operating correctly; (d) controller switches and other control devices are operating correctly; (e) all limit switches are operating correctly; (f) all circuits, interlocks, and sequences of operation are operating in accordance with the manufacturer’s specifications; (g) all protective devices are operating correctly; (h) the audio device near the base of travelling cranes is operating correctly; and (i) each motion of the crane operates in accordance with the manufacturer’s specifications. O. Reg. 241/23, s. 17. (1.1) After the erection of a tower crane but before the tower crane is put into service, load tests shall be performed on the tower crane in accordance with clause 6.3.3 of CSA Standard Z248-17. O. Reg. 241/23, s. 17. (2) Operational tests shall be done, (a) after the tower crane is erected on the project and before it is used; and (b) at one-week intervals after the test under clause (a) while the crane is erected on the project. O. Reg. 213/91, s. 161 (2). (3) Overload limit devices for a tower crane shall be tested using test blocks designed for the purpose that have their weight clearly marked on them. O. Reg. 213/91, s. 161 (3). (4) The test blocks shall be kept on the project while the crane is erected. O. Reg. 213/91, s. 161 (4).
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.