CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 157.3

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 157.3 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) Each component of a tower crane manufactured on or after January 1, 2025, must be designed to meet the standards set out in the Table to this section. O. Reg. 241/23, s. 13. (2) If a tower crane manufactured before January 1, 2025 does not meet the standards set out in the Table to this section, or equivalent standards as determined by an engineer, the crane shall not be used until an engineer verifies that the crane has been modified to meet those standards. O. Reg. 241/23, s. 13. TABLE Item | Column 1 Component | Column 2 Minimum design standards 1. | Crane design | Clauses 4.1 to 4.25 of CSA Standard Z248-17, or European Standard EN 14439:2006+A2:2009 2. | Electrical | Electrical Safety Authority SPEC-009 R0, Electrical Safety for Tower Cranes 3. | Control systems | Clause 4.21 of CSA Standard Z248-17
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.