CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 142.01

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 142.01 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) A suspended work platform system or boatswain’s chair and the suspension lines of the suspended work platform system or boatswain’s chair shall be attached to a fixed support in accordance with the manufacturer’s instructions. O. Reg. 242/16, s. 11. (2) Every suspension line of a suspended work platform or boatswain’s chair shall, (a) be made of wire rope, subject to subsection 142.03 (1); (b) be vertical from the fixed support, including the outrigger beam; (c) be parallel to every other suspension line, if any; (d) extend to the ground or have a positive stop that prevents the suspended work platform or boatswain’s chair from running off the end of the suspension line or lines; (e) have each connecting end wrapped around a protective thimble and adequately fastened; (f) be capable, along with its attachment components, of supporting at least 10 times the maximum load to which it may be subjected; and (g) have fastenings and terminations that are, (i) corrosion-resistant, (ii) capable of developing at least 80 per cent of the rated breaking strength of the suspension line itself, (iii) recommended by the manufacturer for use with suspended work platforms or boatswain’s chairs, and (iv) installed in accordance with the manufacturer’s instructions. O. Reg. 242/16, s. 11. (3) A U-type rope clamp shall not be used on a suspension line or tie-back. O. Reg. 242/16, s. 11. (4) A hoisting device on a suspended work platform system or boatswain’s chair shall, (a) have legible operating and safety instructions affixed to it in a conspicuous location; and (b) meet the requirements of clause 8 (Hoisting) of CSA Standard Z271-10. O. Reg. 242/16, s. 11. (5) A suspended work platform system or boatswain’s chair shall not be loaded in such a manner as to exceed the rated platform capacity for its work platform or individual platform module, or the rated hoist capacity. O. Reg. 242/16, s. 11. (6) A work platform or boatswain’s chair shall not be suspended or used at any time the wind speed exceeds 40 kilometres per hour. O. Reg. 242/16, s. 11. (7) If an outrigger beam is to be used as a fixed support, it shall, (a) be tied back and securely fastened to the building or structure, or a component of the building or structure, by a secondary cable or wire rope capable of supporting the allowable suspended load; (b) be secured against horizontal and vertical movement; (c) have securely attached counterweights that are designed and manufactured for the purpose; and (d) have adequate legible instructions, provided by the manufacturer or an engineer, for the use of the counterweights affixed to the outrigger beam. O. Reg. 242/16, s. 11; O. Reg. 375/22, s. 5.
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.