CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 141.2

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 141.2 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) Every owner of a building or structure where a suspended work platform system or boatswain’s chair is to be used shall ensure that there is a roof plan for the building or structure and ensure that the plan, (a) contains drawings and layout diagrams that show the positions of all fixed supports on the building or structure; (b) indicates whether the fixed supports are adequate for the purposes of attaching work platforms, boatswain’s chairs and lifelines; (c) meets the requirements of clause 10.1.2 (Roof Plan) of CSA Standard Z271-10; and (d) has been approved in writing by an engineer. O. Reg. 242/16, s. 11; O. Reg. 375/22, s. 5. (2) The owner shall post a legible copy of the roof plan near every entrance to the roof or top level of the building or structure where the suspended work platform system or boatswain’s chair is to be used. O. Reg. 242/16, s. 11. (3) The owner shall provide a copy of the roof plan to the constructor for a project at the building or structure. O. Reg. 242/16, s. 11. (4) The constructor shall ensure that every employer whose workers are to use the suspended work platform system or boatswain’s chair at the building or structure has received a copy of the roof plan. O. Reg. 242/16, s. 11. (5) No employer or constructor shall permit a worker to use a suspended work platform system or boatswain’s chair on a building or structure unless the employer or constructor has received a copy of the roof plan and, if required, the design drawings and written procedures prepared under subsection 141.3 (2). O. Reg. 242/16, s. 11.
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.