CONSTRUCTION PROJECTS, O. Reg. 213/91
Section 141.1
Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 141.1 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026
The text
(1) Every fixed support shall be designed by an engineer in accordance with the requirements of this section. O. Reg. 242/16, s. 11; O. Reg. 375/22, s. 5.
(2) A fixed support shall be designed and constructed to support all loads to which it may be subjected. O. Reg. 242/16, s. 11.
(3) The design of a fixed support shall use the factored loads calculated in accordance with subsection (4). O. Reg. 242/16, s. 11.
(4) The following values of load factors, as described in the provisions of the Building Code that address Limit States Design, shall be applied to calculate the factored loads for an outrigger and supporting structure, excluding anchorage connectors:
1. Live load factor = 3.0.
2. Dead load factor = 1.25. O. Reg. 242/16, s. 11; O. Reg. 142/17, s. 18.
(5) A component of a fixed support that may be subject to overturning shall be designed and constructed to support at least four times its allowable suspended load or force. O. Reg. 242/16, s. 11.
(6) Subject to subsection (7), an anchorage connector shall be designed to resist,
(a) the application of 22.2 kilonewtons in any direction without fracture of any component or pullout from the fixed support; and
(b) a test loading of 11.1 kilonewtons without permanent deformation of any component when subjected to the test loading in the direction or directions that generate the most critical effect on the fixed support with respect to stability and strength. O. Reg. 242/16, s. 11.
(7) For a suspended work platform system with a span between adjacent points of suspension of greater than 12 metres and up to 30 metres, the anchorage connectors for supporting the suspended work platform system shall be designed in accordance with good engineering practice to support the allowable suspended load and the minimum live loads for the length of the suspended work platform to be used, as set out in subsection 137.1 (3). O. Reg. 242/16, s. 11.
Read the CONSTRUCTION PROJECTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.