WELLS, R.R.O. 1990, Reg. 903
Section 14.9
Cite as WELLS, R.R.O. 1990, Reg. 903, s. 14.9 · current to November 11, 2026 · consolidated from January 1, 2020 · read from e-Laws on November 16, 2026
The text
(1) Before the structural stage of a well is completed, the person constructing the well shall test the yield of the well in accordance with section 14.10. O. Reg. 372/07, s. 15.
(2) Subsection (1) does not apply to a minor alteration of a well or the installation of a pump. O. Reg. 372/07, s. 15.
(3) Subsection (1) does not apply to a test hole or dewatering well if the person constructing it,
(a) measures the static water level in the well by means of a plastic or metal tape, an air line or an electrical device; and
(b) ensures that any part of the tape, air line or electrical device that comes into contact with water in the well is clean. O. Reg. 372/07, s. 15.
(4) Subsection (1) does not apply to an alteration of a well that involves only,
(a) the removal of the casing above the ground surface so that the casing is flush with the ground surface;
(b) the addition of casing above the ground surface; or
(c) the creation or removal of a well pit. O. Reg. 372/07, s. 15.
Read the WELLS on e-Laws ↗
Made under Ontario Water Resources Act, R.S.O. 1990, c. O.40.