X-RAY SAFETY, R.R.O. 1990, Reg. 861

Section 17

Cite as X-RAY SAFETY, R.R.O. 1990, Reg. 861, s. 17 · current to November 11, 2026 · consolidated from July 1, 2021 · read from e-Laws on November 16, 2026

The text

In addition to any other requirements of this Regulation, where an employer is in possession of an X-ray source in which the X-ray source, the object or the portion of the object being exposed to X-rays and the detection device are enclosed in a cabinet that, independent of existing structures, provides radiation attenuation and prevents access to the X-ray beam, the employer shall comply with the following requirements: 1. A warning device that indicates when X-rays are being produced shall be mounted on or near the cabinet in such a way as to be conspicuous from any position from which the cabinet can be opened. 2. Access doors and sample ports shall be interlocked with the X-ray source or with an adequately shielded shutter of failsafe design and, where operation has been interrupted by an interlock, it shall be possible to resume operation only from the control panel after the interlock has been reset. 3. The cabinet shall be so arranged and shielded as to prevent the air kerma rate from exceeding 5 micrograys per hour at any accessible point 5 centimetres from the external surface, under all possible operating conditions. 4. Cabinet X-ray equipment that is intended to permit the entry of a person shall also be provided with, i. suitable audible or visible warning signals within the cabinet that shall be actuated for at least ten seconds immediately prior to the initiation of X-ray production after the closing of any door that is designed to permit human access into the cabinet, ii. suitable audible or visible warning signals within the cabinet that shall be actuated during X-ray production, and iii. effective means within the enclosure to prevent or interrupt the production of X-rays, that cannot be reset from outside the enclosure and that can be reached without having to pass through the primary X-ray beam.
Read the X-RAY SAFETY on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.