MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 35
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 35 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) If a flow of flammable gas is encountered in a mine or in an enclosed building housing a diamond drill on the surface and the concentration of the flammable gas is unknown,
(a) all sources of ignition in the affected area shall be eliminated;
(b) all electrical equipment in the affected area shall be de-energized;
(c) the affected area shall be evacuated;
(d) precautions shall be taken to prevent persons from entering the affected area inadvertently;
(e) a supervisor shall be notified;
(f) the affected area shall be tested by a competent person; and
(g) the affected area shall be designated as a fire hazard area. O. Reg. 236/99, s. 3.
(2) Subject to subsections (3), (4) and (5), work may resume if the concentration of flammable gas is below 1.0 per cent. O. Reg. 236/99, s. 3.
(3) If the concentration is less than 0.25 per cent and the affected area is tested periodically to ensure that the level of concentration is known, no precautions are required. O. Reg. 236/99, s. 3.
(4) If the concentration is 0.25 per cent or greater but not more than 0.5 per cent, all of the following precautions shall be taken:
1. The supervisor shall provide written instructions of any special precautions.
2. The instructions, if any, shall be communicated to the workers.
3. The affected area shall be designated as a fire hazard area.
4. The affected area shall be tested at least once per shift before work begins and, again, on release of any further flow of gas.
5. A flammable gas detector shall remain in the affected area for the purpose of continued testing. O. Reg. 236/99, s. 3.
(5) If the concentration is 0.5 per cent or greater but not more than 1.0 per cent, all of the precautions set out in subsection (4) shall be taken and the electrical equipment, diesel engines, tools and other material used in the workplace shall be designed to function safely in a flammable gas atmosphere. O. Reg. 236/99, s. 3.
(6) If concentrations of flammable gas exceed 1.0 per cent in an area, all of the following precautions shall be taken:
1. All sources of ignition in the affected area shall be eliminated.
2. All electrical equipment in the affected area shall be de-energized.
3. All persons, other than competent persons necessary to measure the concentration of flammable gas and to make ventilation changes, shall be removed from the affected area. O. Reg. 236/99, s. 3.
(7) In mines where flammable gas is known to occur, workers who are underground or diamond drillers who are on the surface shall be advised of,
(a) the probability of encountering a flow of the gas; and
(b) the measures and procedures prescribed in this section. O. Reg. 236/99, s. 3.
(8) For the purposes of this section, the concentration of flammable gas means the percentage, by volume, of flammable gas in the general atmosphere. O. Reg. 236/99, s. 3.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.