MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854

Section 235

Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 235 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) A signalling system shall be installed at an underground mine by which signals may be exchanged between the tender of a shaft conveyance and the hoist operator for the purpose of controlling the hoist. R.R.O. 1990, Reg. 854, s. 235 (1). (2) The system prescribed in subsection (1) shall, (a) not be operated in excess of 150 volts; (b) be supplied with power from a transformer which supplies no other load; (c) where the primary voltage of the transformer exceeds 750 volts, (i) have one conductor of the power supply grounded, or (ii) have the conductors ungrounded if, (A) an isolating transformer with a 1 to 1 ratio supplies the power for the signal, and (B) the circuit has a device to indicate a ground fault; (d) have the non-current carrying metal parts of the signalling unit grounded unless the unit is mounted at least 2.4 metres above the floor; (e) except as prescribed in subsection (3), be capable of providing signals that are, (i) audible and clear, (ii) separate for each shaft compartment, and (iii) distinctive in sound for each compartment; (f) be arranged so that the hoist operator can return a signal to the worker signalling; and (g) be installed at every working level, landing deck and any other necessary shaft location. R.R.O. 1990, Reg. 854, s. 235 (2). (3) The system shall be capable of providing a signal that is both audible and visible when installed on a multi-deck sinking stage. R.R.O. 1990, Reg. 854, s. 235 (3). (4) Signalling systems using radio frequencies for transmitting signals shall comply with section 174. R.R.O. 1990, Reg. 854, s. 235 (4).
Read the MINES AND MINING PLANTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.