MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 217
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 217 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) No drum hoist shall have,
(a) more than three layers of rope where the drum has helical or spiral grooving or does not have grooving;
(b) more than four layers of rope if the drum has parallel and half pitch grooving; and
(c) less than three dead turns of the rope on the drum. R.R.O. 1990, Reg. 854, s. 217.
(2) Despite clause (1) (b), a drum hoist may have a maximum of five layers of rope if,
(a) the mine hoisting plant meets the standards set out in SABS Code of Practice 0294, Ed. 1, “The performance, operation, testing and maintenance of drum winders relating to rope safety”, as approved according to procedures of SABS on August 4, 2000; and
(b) the rope is used, maintained and examined according to the requirements set out in SABS Code of Practice 0293:1996, “Condition assessment of steel wire ropes on mine winders”, as approved by the President of SABS on September 16, 1996. O. Reg. 31/04, s. 13.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.