MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 215
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 215 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) A clutch of a drum hoist shall be interlocked with the brake so that,
(a) the clutch can be disengaged only when the brake of the drum is fully applied;
(b) the clutch is fully engaged before the brake of the drum can be released; and
(c) the brake will apply if the clutch begins to disengage inadvertently. R.R.O. 1990, Reg. 854, s. 215 (1); O. Reg. 60/94, s. 12 (1).
(2) The controls for engaging and disengaging a clutch shall be guarded to prevent their inadvertent operation. R.R.O. 1990, Reg. 854, s. 215 (2).
(3) No band type friction clutch shall be used. R.R.O. 1990, Reg. 854, s. 215 (3).
(4) A device must be installed that indicates to the hoist operator whether or not the clutch is fully engaged. O. Reg. 60/94, s. 12 (2).
(5) The following apply if a hoist is installed on or after October 25, 2002 or if a brake control system or clutch control system on a hoist is modified after that date:
1. The hoist shall be designed and equipped with at least two independent clutch brake interlocking systems to prevent any single component from causing a failure.
2. The hoist shall be designed so that the clutch brake interlocking systems may be safely examined.
3. The clutch control shall be designed so that the selection of clutch disengagement automatically applies the clutch drum brake. O. Reg. 291/02, s. 7.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.