MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 196.1
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 196.1 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) Every conveyor shall have an emergency stopping system that operates a manual reset switch that stops the conveyor. O. Reg. 167/16, s. 13.
(2) If a conveyor is accessible to a worker, the emergency stopping system is required,
(a) at any pinch point on the conveyor that is not set out in subsection 196 (3) and the emergency stopping system must be within easy reach of a worker at each of those pinch points; and
(b) at any other locations along the conveyor in order to ensure that the system is always within easy reach of a worker. O. Reg. 167/16, s. 13.
(3) If a conveyor is inaccessible to a worker by any means listed in subsection (4), the emergency stopping system is required at a location or locations determined by the employer following consultation with the joint health and safety committee or health and safety representative, if any. O. Reg. 167/16, s. 13.
(4) For the purposes of subsection (3), the following are considered means by which a conveyor is inaccessible:
1. A fence.
2. A barricade.
3. A gate equipped with an interlocking device, which has a manual reset switch that renders the conveyor inoperative when the gate is moved or opened.
4. The location of the conveyor renders it inaccessible.
5. Any combination of paragraphs 1 to 4. O. Reg. 167/16, s. 13.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.